Smith

Whatever you did, mine are working now as well. Thanks.

I haven't gotten any myself since the change over. I did have to reset my options to recieve instant notifications and re-enable my subscriptions, but it still doesn't seem to be working for me.

Wrong barrel, wrong chamber, wrong twist rate = keyholing. THe Tantals had this problem when Century tried to cut corners by using 5.56 barrels instead if using the correct 5.45 barrel.

The only guns I've heard that consistently have problems are DPMS AR's. Not a knock on DPMS, they just tend to be the ones I hear of having problems with Tula/Wolf/Golden Bear/Brown Bear/Silver Bear/etc. I've used it in a variety of AR's and AK's pretty much exclusively and I've never had a problem.

They are desinged to be made and serviced by 12 yr old boys in caves in third world countries. I'm pretty sure you wil have no problem with working on it. I love the simplicity of the AK and yes they are easy to swap funiture on. I really like the IZH-332 ( Saiga). With the new import regulations Izhmash is bringin them into the country with the front end already converted at the factory. At around $500, they are a bargain. The rear end conversion is very easy to do. Great way to get into a quality AK and still have the fun of converting it as well.

You blog says it is still being converted.

Wolf in sheep's clothing. I think of Elliot Carver in the James Bond film (not one of the best ) "Tomorrow Never Dies"

Bulgy Circle 10 mags are the best mags out there. Other than that com-bloc surplus and nothing else. For some reason US manufactures can't make a decent AK mag, including the Palm mags. I've heard nothing but bad things out of them.

Technically, they are all "parts kits". You can't import AK's into the country assembled. They will all have to be assembled or converted (Saiga's only) once they are in the country. Now it is true that some parts kits are better than others and some are missing parts that the builder will substitute US made parts in. Higher end AK's cost more because the parts kits or conversion are on virgin kits or have parts kits that have the bad parts weeded out. The cheaper builds aren't as picky or thorough thus the cheaper cost. Most of the kits that are sold come from countries that no longer use the '47, have surplus guns left over from the cold war, are from countries that have been required to lessen their military numbers through treaties or NATO stipulations, or no longer exists (i.e. Yugoslavia). They are not necessarily de-milled because they are beat up and used up. Many guns that were never used get de-milled for the above reasons.

Generally they will all work. Canted sights and gas blocks are the biggest issue usually. The better AK's will be better finished. The bolt rails and bolt/hammer interface will be smoother and not "catch" during charging and firing. The Yugo's and some Polish recievers will use a 1.5mm thick reciever where everyone else will use a 1mm thick reciever. It is debatable whether it makes a difference. Also, the good builders will heat treat the recievers correctly so they won't warp or twist. They will also use the correct barrel. There have been cases where builders tried to cut cost by using barrels with standard US twist and diameters instead of using the correct Russian specks. Century had a probem with this. They were using 5.56 barrels instead of the 5.45 to cut cost and they had bad key holing issue. The better ones will also have cleaner and straighter welds. Mostly asthetic but it makes a difference in appearance. I'm sure there are some other issues, but that is what comes to mind immediatley.

There are some little brackets that go across the forearm that need to be taken out. As the forearm comes back the little brace starts binding on the portion of the barrel where it starts to flair out at the reciever. I spent hours with the same problem thinking the littles braces were necessary. Poped them out and it was good to go. I'll try to get some pictures tomorow to show the braces.

No need to insult the guy and make him feel bad about what he has when there is no reason for it. Like Mike said, Maadi's and Norinco's are some of the best around if you know which ones to look for. They can be near the top or near the bottom. If his guns are working for him they are good AK's. If he gets Arsenals or the like he will notice the difference, but they are still a loose tolerance AK.

It's in your pocket.

Don't listen to the other guy. The only difference between a "good" AK and a "bad" AK is generally canted front sights, gas blocks, or a poor finish. All those are easily fixed. What most people look for is a "dimpled" reciever and time period correct parts and or original furniture. You are off to a fine start and as you get better AK's you will notice the difference in asthetics and finish work. That being said the order of what is best changes with who is stating it but here is the general way it goes. 1. Russian - Saiga conversions or the extremely rare and expensive imported Rusky AK. Aresenal, Legion, and many of the top builders use these. 2. Bulgarian - Aresenal, Legion, and many top builders use these. 3. Polish - Tantals (careful with Century builds) and standard AK47 4. Yugoslavian 5. Egyptian/Norinco (Chinese) depending on when they were imported. Otherwise send them to the bottom of the list. 6. Romanian Again the list order can change and speeks to the eveness of com-block AK kits. Century builds are hit and miss and many builds these days are using American recievers and barrels. Sometimes that is good and sometimes that is a bad thing. Like I said before, if the front sight and gas block are straight, the action is smooth, and it looks good to you it is a good AK regardless of the origin or builder.

Based on the justifications to choose the 1911, logically means following that premise to conclusion and you would actually have to choose a revolver. I'm grabbing whatever is laying around and I have. Competition shooters favor the 1911 for the trigger and 5" barrel. You can get that in other guns as well, they just don't look as good.

.... and yet he was killed by an avowed extreme LEFTIST socialist Communist. Some people just can't get the easy stuff right. Had nothing to do with the South, Klan, Catholicism (directly), or any other thing the left wants to pin on their perceived "RWE". He was killed by their own nut job.

If If they don't have the judgment or self control to be responsable without government intervention, do you really think birth control will fix anything? Bailouts don't work for corporations, banks, or irresposable, oversexed, baby makers.

Hyper usually mean they have a lot of energy and want to hunt. Learning to curb it will be what training does. It is easier to train a little spirit than try to instill it.

BUL is or was making them. Looked good but I don't think there is a market. Most people looking for a limited capacity, large, all steel/Al, heavy, single action aren't too keen on the latest and greatest in technological advances. Otherwise they'd be using a striker fired polymer gun in place of a 1911 already. Seriously, it's kinda like the hillbillies that convert Pinto's into 4x4 with lift kits and mudders. Just not meant to be together.

As to your question our choices have consequences and what you mentioned simply reflect that. Don't know where that last statement made it into the discussion but it does seem God has a pretty good idea of the consequences of our choices. I yet to see where he cautions or forbids us something that doesn't negatively impact the person or society.

Not to get into a debate but there is little denial that when AIDS appeared it was fairly isolated to the gay (men) in California and NY and was fairly isolated to those communities. It began to grow as more men began spreading it in various relationships, blood transfusion, etc and now it is what it is. Statistically it is still mainly spread through male homosexual activity. Whatever it is now, how it started and spread is not all that ambiguous. As to the pilot and monkey that is one theory, but he is actually factual fairly accurate on the other issue. So those crying he is a moron and needs "education" maybe it is your own repressed urges that need education! Tongue in cheek fellas The History of HIV and AIDS in America HIV/AIDS in the United States - Wikipedia, the free encyclopedia

Do you have pictures showing it undamgaed before you sent it in? If not it's going to be hard to prove otherwise. I can see him claiming it was sent in that way.

IIRC by law, LE have no duty to protect or render aid so I don't see much happening in that regard. However, our judicial system will probably rule against him anyway. That being said, he will and should be fired. As to the kid, it's a good lesson for these youngsters who think they are immortal. All he had to do was stop. If it was only speeding no big deal If there was something else he was hiding ..... Good thing he only killed himself and not somebody else which is usually the case.

He has a C&R liscence and is appplying for an FFL. He likes to call his C&R an FFL in the technical sense.

I LOVE the idea of a "tactical" lever gun for self-defense/home defense but I think they got it right in the 19th century.