Smith

Well, got her out today and got the scope dialed in after a small learning curve. Took a bit since these scopes are different in how they set up, but once it was on ... it was ON! This thing is a blast to shoot! The factory mag and the two additional mags I got functioned flawlessly with 147g LB and and a few HB 180g I got just to try out. I was impressed with the accuracy and the glass is very nice. It definitely has some jump to it, but nothing I would say is hard to handle. It was also nice to find that the trigger is a factory two stage trigger. Not the best and it is gritty but I believe it can be smoothed out with some polish and lightened with a JTE reduced power trigger spring.    I've had a lot of guns in my short time and there have been a few that surprised me and my expectations, this PSL  is definitely more fun than I thought it was going to be.

Absolutely not. SBR/NFA info is Tax info and is private and can only be requested and required by the IRS.   However, since it is a felony they can hold you until a proper tax authority is summoned to get the information. It's just easier to voluntarily give the info instead of waiting for a tax authority to request and then verify your personal tax info.

I like the Blackhawk stocks. Especially since my kids shoot it a lot and it is the best looking adjustable stock I've found. Very lightweight and completely free floats the barrel. Stock photo but is similar to my setup.

How hard is it to run a registration search on a pretty specific new model car like that Camero and find the guy in short order?

What Dolomite said. The only issues I've heard that seem like they could actually happen are that the higher pressure over time can cause throat erosion and possible gas port erosion. It seems like that is possible, but also seems like it would take A LOT of rounds before it could be an issue.

Very nice! That's a massive scope.

[quote name="Trekbike" post="1107739" timestamp="1391826678"]What's the barrel length on that beast?[/quote] 24.4"

Nah, waiting on ammo to get here.

  After looking at them and reading the post from the picture you posted, all mine were upside down and backwards. Fixing them then made sense, as I guessed it was to raise the front of the follower.

My mag springs tails are the other way and don't look like they fit the other direction.?

You mean the one where the woman filed a false claim ... according to her own account after the fact?   You guys that keep talking about this guy are what make Zimmerman a "celebrity." :shake:  :surrender: Zimmerman is to the gun world what Kim Kardashian is to pop culture. Relevant because people won't ignore her.

  Yeah, because Zimmerman has so many other ways to make a living. Like all the job offers he has flowing in. Regardless of what you think of his case, I have failed to see him try to exploit the situation.

No you rotate your right hand palm up and throw the lever with your left hand. You will need to also lean you head to the left so as not to catch a chunk of brass/steel in the head.

Thanks for the heads up on the mag. I've never been a fan of the recoil buffers, but would they make a positive difference in a lower volume gun like the PSL?

Yes. The receivers are the same. By the way if you get a peep sight go to Kel-Tecs page and order their aluminum windage adjustable peep sight. Far better than the TWS, cheaper, and is windage adjustable. http://www.keltecweapons.com/su-16-and-su-22-rifles/su-16-parts/su16b-365-rear-peep-sight-b-model/ Here is a .308 with the Midwest mount. I opted for that on the .308 because I felt it was more stable with a heavier bodied variable optic and I could use shorter rings. Here is a Draco SBR I had with the TWS. It was phenomenal with the peep sights and the Bushnell TRS-25 co-witnessed with the peeps (shown with Vortex SPARC w/ADM mount, does not co-witness). Rock solid. MAK90 Milled with TWS and TRS-25 co-witnessed.

I'm a huge fan of the TWS. Proper cheek weld. really long sight radius (using peeps), and it puts the weight in a more balanced position than the Ultimak. The Ultimak sits a little lower, but I don't like that it replaces the gas tube, subjects you optic to all the heat of the AK, and puts all the weight out front.   I also like the traditional side mount, especially when it is one of the lower versions like the Midwest Industries. https://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_ID=433

GSG

I like the video where bigfoot and the tree can't seem to decide who is in the foreground. Terrible CGI.

I'm not a huge 1911 fan but the Sig's are by far my favorite. I like their thin squared slide profile and external extractor. Lot's of gun for the money too especially with this deal.

Yes. They are made that way.

I've always wanted a SVD and since I don't have 10's of thousands of dollars to get one of those or even a TIGR, I figured i would try for a PSL. I've been kicking myself for not getting one when they were $500. Well, fortune shined on me and I found one! Traded a Saiga 12 for it which I know is not necessarily an even trade but there won't be any more imported PSL's and I can always get another Saiga 12. I'm not near as up on my PSL markings as I am on AK stuff, but it appears to be a Romanian military grade build imported by TGI. It doesn't have any of the domestic manufacturing marks, so I believe this is a real deal military grade PSL. Definitely needs some trigger work, but I'm as happy as a tick on a dog!

Hope it works out for you. I sure do like mine.;)

As much as I hate taxes and most are unconstitutional, sales tax is the one tax that is legitimate, constitutional, and legal. Why do internet retailers get to sell without collecting taxes thus lowering their prices which allow them to undercut the local mom and pop stores and that is fair? 

    I think you misread something. ;)

Happens all the time and people get all surprised when we expect to physically verify ourselves their gun is clear. I've cleared round after round out of  "unloaded/empty" guns.   As to his Glock going off in his holster, I call him a liar on this one.