MikeW

Since you are in ETN why not check out PCS? Predator Custom Shop

Thanks Randy... What brand of 30 Moa mount would you suggest. I have the EGW Fclass 20MOA extended on the rifle right now. However I may not need the extension on the rail because the stock has an adjustable LOP. The Sightron 10-50x60 has 50MOA of elevation to the NF 10-42's 40MOA... Would the Sightrons 50 + my 20 MOA mount get leave me enough room to get to 1,000?

I am going to order a new scope today (or tomorrow) to use on a 600-1,000yd F-class T/R (.308) gun. I have narrowed my choice down to two scopes: Nightforce Benchrest Rifle Scope 30mm Tube 12-42x 56mm NP-2DD Reticle Sightron SIII Long Range Rifle Scope 30mm Tube 10-50x 60mm Side Focus 1/8 MOA Dot Reticle If the NF NXS with the 1/8 elevation clicks were out in the market I would consider it also. However, the NXS my cost a good bit more than the two listed above. I have a 20 MOA base and may need the extra 10MOA that the Sightron has built in... but I do like the proven track record of the NF products. I would appreciate any advice that folks with more experience may have to offer.

I hear great things about George and GAP rifles. I do not own one but my M40A1 clone has an action that was clip slotted by GAP. What type of "range" are you looking for that is pushing you towads the .338 or 300WM?

Puff ..Puff ..pass

<<< Not an Admin .. WTF

Ewwww

Correct, The adjustable plug will safe the life of your op rod

WTF

NICE! Jeff ....now you need one more Garand so you can make use of the stacking swivels

You made the right choice

100% agree

It is a beauty Congrats!

Humm sounds like the teeth on your apature or pinion could be out of spec. Call CMP they will make it right. The removal of the rear sight is easy enough. You may want to try and tighten/loosen the screw on the rear sight and see if that will help.. If you remove the rear sight and clean it really well then it may help the teeth on the apature and pinion "bite" better, if not CMP may need to send you some parts. To remove the rear sight lossen the screw on the rear sight. The pinion should unscrew and come out. Pull the apature up a bit and use it as a lever to pop the dust cover off.. ... but you may not need to remove the base and cover unless there is a lot of gunk under the cover.

Nice look'n rifle I had to put my USO Anticant towards the rear scope ring and there is barely enought room for it to close.

I saw it this AM a like it... I think the boot is a bit corney but i guess that it does make a point

Looks great Eric... I wanna get behind the wheel on that one to feel the break.

Nice

I hear ya Bart... I may take this one to get bedded soon. However, right now I have switched my focus to a F-Class type rifle build. I will get it bedded first... the rest of the parts should be in hand this week.

200 yards with 168 handloads today. At .242" 3-shot 100 yard zero 1.28" 5-shot group at 200 ( 100 yard zero scope settings=low). 2.35" 200-yard zero 27 shot group.. I cut me an ok smiley face

I have a couple of 1911's left The "sleeper" is one of the most accurate that I have ever owned.

Thanks for posting the info 284

Congrats ,I had one and it was a sweet shooter

Where is Kwik when we need him

I have a Savage (Western Field) that works like that. It is not a trench gun but is a WWII Riot gun with US markings. "Just hold the trigger back and pump til empty"