jphillips63

Here are a couple more hummers.

Tapatalk is acting up sorry for that

Just a few more Sent from my iPhone 6 using Tapatalk Pro

Sent from my iPhone 6 using Tapatalk Pro

Sent from my iPhone 6 using Tapatalk Pro

Glad to see this thread, this is my second hobby. Here are a few photos I've taken.

Thanks, the pictures really doesn't do it any justice. It really is a beauty to be seen in person.

This is a custom built off of a Bat MB dual port action, the stock is a Terry Leonard Rosewood with carbon bibber inlets for strength, Jewell BR Trigger and a NF competition 12-55 scope. I've already ordered two more barrels and had sent to be chambered all in a 6 Dasher.

Thanks guys for input. I'm gonna go hold a few and haut see what fits my hand the best.

I'm considering buying a small 380 to keep tucked away. The two I'm considering are either the Kimber micro carry or a sig 238 Can I get opinions of either handgun and or maybe a better choice if there is one. The one thing I don't want is something cheap and cheap feeling. I also don't want some so tiny that it don't fit or feel right in my hand. I prefer to have all fingers on a grip but I know this won't happen since these will be small carry pistols. James

This will get thrown out, the handgun falls into the classification of a relic not a firearm.

Can I ask are any of you guys shooting three gun use a true 3 gun modified shotgun? If so what brand are you using and who did you get to do the work? I've been looking at a versa max for myself but unsure to go that route or buy something and have it worked on.

Went out the other day and stretched the 300 WM out to 1800 yards shooting the Berger 230 grain OTM and made several hits and recovered a bullet from the bone pile we setup to shoot at. The bullet, it retained 216.4 grains after impact. Plenty enough to put some hurt on something. Here's the target. The target area was roughly a 10-12" area. So most definitely shooting under 1 moa at that distance. Here are impacts near the target. Those impacts were withing a good 6-8" area of the intended hit. The target was on a steep hill so the pictures really don't show that. Now here's a look back to the shooting area from the impact area. I don't know how to mark the spot on photo bucket but we were in the small opening in the tree line at around 11:00 in the photo. These were shot by myself using my custom built BAT action with a Lilja 1.300 dia 3 groove 1-10 twist x30" the brass was Lapua using a F215 m primer and 75 grains of H1000 the scope was a NF 12-42 benchrest with a 40 moa base and the Barrett 15-40 moa rings. The rifle zeros in at 1600 yards with the turrets bottomed out.

Thanks everyone it's a rifle action off one of my competition rifles that I'm wanting to get a barrel fitted and chambered for.

I have a guy in Memphis that I want to fit and chamber. Barrel for me to one of my competition actions. Does he have to have an FFL in order to receive my action to fit a barrel to it? I'm wanting to ship the action to him along with a used barrel.

I have a guy in Memphis that I want to fit and chamber. Barrel for me to one of my competition actions. Does he have to have an FFL in order to receive my action to fit a barrel to it? I'm wanting to ship the action to him along with a used barrel.

Ok thanks on your guys input.

So can I replace the cat 5 with cat 7 and be ok my concern mainly are the male connectors the same Sent from my iPhone 6 using Tapatalk Pro

Yes I do believe so, I have the newest high speed internet setup from wildblue. It's supposed to be a 12mbps speed.

I'm on satellite Internet and I'm looking at getting the most out of the speed as possible. So right now I have 100' cat 5 line run from my modem to a wireless router to my room where my computer and TV is at. I'd like to change the cat 5 cable out for cat 7, is this possible? Are the connectors the same is my main concern. Next is my router, I don't recall the model but it's a Belkin and an older model to boot. I'd like to upgrade this and see if I can also get higher speeds thru wifi connection for my new 4K TV I just installed. So my question on this what's the best router with highest output ratings I can use for in home use? I don't understand the difference between "N" and "AC" either. Thanks in advance.

Calsonic arena here in Shelbyville is nice and has plenty of parking why don't the show promotors look into this for there future venues Sent from my iPhone 6 using Tapatalk Pro

Only way is with a cummins. Those are rock solid and the lower end makes those ford internals look like child's play

This was on another forum the guy is very lucky. http://thefiringline.com/forums/showthread.php?t=553905

That's a simple to fix move North. Sent from my iPhone 6 using Tapatalk Pro

Tolivers in Manchester has a great selection