gomer pyle

How many hours are safe on a hustler super z?

I'm at 33 days right now. I can't wait

I guess I'll do a little more searching

I am looking more closely at the Toro Titan MX5400 and the Bobcat XRZ. They are both right around $5k. Is one any better than the other? or another in the same price range I should look at closer? I don't know of a BigDog dealer in Murfreesboro, so I haven't looked at them. The Hustler Fastrak is quiet a bit more expensive and I just can't find anything to make it worth $1500 more??  I'm not against a used one, but i do worry about the abuse it might have gone thru.

Is the scag tiger cub still produced(i can't find one on scag's site) or did the tiger cat replace it? I like the looks, reviews and price of the toro titan mx5400. i've also looked online at the hustler fastrak. How do the hydraulics compare on those three? the welded decks seem similarly built between the models i've read about, so i assume the main difference is going to be in the pumps?   for $25k it better mow the grass by itself!!

I scared to death I'll regret selling it but I can't afford both. It is an all original, still has the front side shields, 3pt arms and only 730hrs  

I have a John Deere 332 riding mower that I like but it isn't what I want to cut my yard. Can't cut when it's wet, harder to cross hatch, slower, etc.. I used to own a Bad Boy ZT which I did not like due to the electric deck pick up and the hyraulics were not smooth. It gave me a bad taste about zero turns in general and swore myself off of them. I am starting to rethink, now that I have my new yard going pretty good. I cut 1 acre twice a week right now, but it will probably be 1.5 acre next year. I can't afford a full commercial model. What brand/model do y'all recommend?

I haven't been there in years due to the same reasons. I may have to give them another try, especially considering my suppressor will be shipped there??

Does anyone know when Ruger will be releasing their 77/17 WSM? Or any other manufacturers besides the cheap Savage BMAG? I'm going to get a 17 and like what I'm reading about WSM. Volquartsen has a rifle based on the 10/22mag that should be released sometime soon but I assume it will have the same problems as the HMR?

I need my barrel dimpled for a gas block set screw. It is a melonite threaded barrel. Is there anybody in Murfreesboro area that could help me?

pm me your phone # and I will send you some pics of the name plates

Thanks Ugly. DustBuster, let me know

According to my local store. There will be no more .223 or 45. All that was manufactured is gone. I don't know if he means at this price or no more period or if he even knows what he's talking about. He did have a full pallot of 9mm and a few 308. 

My bills are almost double what they should be considering the size of my house. From what I have been told and the research I've done myself, it is better to be too small than too big. Too big heats/cools an area very fast but does not run long enough to circulate all the air in the house, so you are left with hot and cold spots. Also, it's just like a big block vs a 4 cylinder, yes both will work and the big block is more fun but the big block is going to burn a lot more fuel.  A zone system requires the two different areas to be within 60% of one another in size, my bonus room is right at 20% of the rest of my house. Therefore when just the upstairs calls for heat/air, there is not enough vents to except the air being pushed in and the unit builds up pressure and has to shut itself off. The Teddar Company has tried to get me to let them patch on this one and get me by but it's a 1 year old house that was not done correctly. Doing this will further help my court case and will have my house done correctly.   I know how to search craigslist but that does not give me a way to price what I have. Just because someone is asking $10,000 don't mean they will get it.

I have a 5ton Goodman split zone unit on my house. It is a little over 1 year old. It is too big for my house and due to other things dealing with the lawsuit(crooked builder), my attorney told me to have the unit changed out and do away with the zone system(my house does not fit within the parameters required for a zone system).  How do I put a value on my old unit, so I can sell it to recoup some of my money? Is craigslist the best place to list it?

I never noticed until I tried to order it

Thanks. That is a ARPerformance barrel but it's out of stock also

This is the 12.5" barrel(http://ar15performance.com/inc/sdetail/11562/14399) that I planned to use on my SBR upper but it is not in stock and they told me they don't expect it back for about 4 months. I plan to run this upper suppressed. I prefer 12.5 but I think I would be happy with anything between 11-12.5. I am not big on stainless, looks wise(would cerakote hold up on a barrel). I want it to be 1/8 or 1/9 as I only shoot 55g. I would also like to stay with wylde camber. I did find this barrel (http://www.rainierarms.com/rainier-arms-ultramatchtm-223-wylde-barrel-12-5) but it's higher and stainless. Can anybody point me towards a good barrel or should I suck it up and wait on the one I want? Or is there any reason not to use the ARPerformance barrel? 

I bought 500rds(thru someone else). I've shot maybe 50rds so far. I've had no problems and would buy more but I plan to be shooting suppressed in the future.

We need to do labor trade out. :surrender: Because I hate painting

Sorry, I thought I put it in there. Gmail

I'll try this tonight. Thanks

As y'all probably will be able to tell, I'm not real tech savvy. I did try to burn them to CD but it wouldn't let me. I don't know how to zip them. I like the idea of the new gmail account, I might be able to figure that out. Lol.

I need to send about 200 emails to my attorney. She asked that I add them to dropbox and then share with her. Can anyone tell me how? Or can anyone tell me another way to do it without forwarding each individual email? I don't mind doing that if I have to, but she didn't want to receive them that way.

What laptop do y'all recommend? I'm looking for something to surf the web, a few word documents, my wife's cricket, and to watch tv(I'll use the hdmi plug to mirror to TV from websites). I have no patience, so faster is better, but would like to stay under $500 if possible. From the reviews I've read HP seems to score fairly high every year, whereas others jump up and down. Apple is out of my price range. I think a 15-17" screen will be fine? What brand and model should I get?