RED333

Not realy, 223, and up will go through a 1/4" steel plate, I would bet smaller hot rounds would go into a one.

I got one of them stick weldors I kin do it for ya, just charge a 6 no 12 pack o beer. JK, do your home work, let this thread go a bit, someone will give you some idears on who and where.

The problem with steel is it "WILL" rust, dont care what yo do it will. I to have giving some thought to this, but the rust thing is keeping me from going forward with it just yet. If you can buy a "new" container it would last longer. Figure out how to seal the outside from water it could last many years, longer than we will live. Take this in steps 1)Find land in the place of the country you want 2) Check local codes, In TN you can wire 1 house a year with out an Electrial licences. (you do have to have a permit) most are good for 6 months. 3) Secure the land (buy out right or loan) 4) Put up a small place, ie Lowes building Depending on how far of the road you build you may have to pay for the service to be run to you pole. You will have to pay from the weather head to the inside of the house, and the pole if you do it like a trailer service. Now start on the shipping contaner house, concret pad, sloped away from the center in all directions,(yea it will rock, use hard wood wedges that you can replace, no where for water to pool, the rust thing again. Dont bury them, dirt will keep water on the steel, rust thing again. Find the land first, then move to the next step.

Thanks for the answer, to bad, I run the roads all week and like to stay around the house on the weekends.

Thanks for the update. Ya know I have sent you PMs, e-mails and get no answer, Same guestion. Is the 4th Ave location a store to shop in? If it is what is the address?

I see something wrong, IT AINT IN MY SAFE!!! Nice find!!! CONGRATS

O yes, everybody, I had to watch what I am putting on my S12 and S308.

Umm, Darwin at work again, and with over time.

Well yea, He will bend to their will.

You can buy glow in the dark paint, put a dot where you need it. Cover it with clear to protect it. It does work, I have not tried it but will this weekend on my backup. http://www.countryporch.com/darice/view.asp?item=PAL628612

Left2Die762, From what I have read in the thread, I think you are. I have learned a LOT from this, the part about the way powder sits in the case got me thinking, it explanes somethings I see going on with my first shots, not 22 but .308. Now if I see this in my 7mm I wont worry. thanks yall

This is better than mine

Dadburn that was deep, have to read it again, and again. Looks like a bit of work to do to get a load for my Browning.

That is your answer Steelharp, I would have never thought of it.

Glock, 40S&W, CC, AK There I have answerd all 4, you are welcome.

I picked up some "Ameriglow" with a ghost ring rear, they work well, they have the trijicon stuff in them. Glow in the dark powder works, but they have to be "charged" before it glows.

They were made last week, aint worth no money, I will give 1 dollar each for them! All joking aside, thet are very cool, I would search the web, ebay, other gun sites.

The 2 I have done so far, Lona Wolf barrel was first, found a thread protector on ebay. The Comp works great http://jagerproducts...1&products_id=1 http://www.ameriglo....s/complete-sets I got the ghost ring rear, you can use it to "one hand cycle" by hooking on about anything to rack the slide.

One way to get Ben in a prison uniform.

Welcome in to fold, we are looking for a few pics of these firearms, we are PIC HOUNDS!!!

Come on in, pull up a chair, first round on you. Make mine a 7mm rem mag.

That is why they marry us. Nice shooting, thanks for sharing!

To honest I payed 10 dollars a piece, have had it for years, I have tried to sell it but not knowning the alloy makes it a bit hard to put a price on. At one time there was some numbers on one piece, I think it was this when I looked it up. Grade 5, also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4, is the most commonly used alloy. It has a chemical composition of 6% aluminium, 4% vanadium, 0.25% (maximum) iron, 0.2% (maximum) oxygen, and the remainder titanium. Wikipedia is where I found it today, now I could be wrong, yall be very carefull with it. I have been helped all my life, some strangers, LEO, friends. Just my way to put something back in the system. My own guote. "Give more than you get. And you will get more than you need, This is true for the good and bad you do in your life."

Columbia has a Mule day, and that same weekend, YARD SALES FOR MILES. Lager you are in Pegram, TN, ya need to check the http://www.tn.gov/environment/parks/HarpethRiver/ it is just up the road.

If you drop it on the pavment, somethind solid, a few times it will loose the magnetic power, knocks the electrons out of line. I know this sounds like so much BS, but it is true.