RED333

Do me a few test loads. Size 3 pieces of brass. Now the fun part, using the bullet seat die, with no bullet, back the seating die out 4 good turns. run the 1st piece of brass up into the die. Now turn the seat die down till you feel the neck start to enter the "crimp" part of the die.(just do it) You can take the bullet seater plug out and look down into the die to see this. Remove the 1st piece of brass and compare it to the other 2 pieces if brass. See if it started to crimp, if not turn the seating die down 1/2 turn and push the brass back up into the die, repeat as needed till you see the crimp start to form. It should "roll" crimp. Red arrow is where the crimp will happen. [URL=http://s896.photobucket.com/user/redintn/media/RifleEZadjBSdie_zps9f42e9e6.jpg.html][/URL]

http://www.midwayusa.com/product/776391/lee-deluxe-3-die-set-223-remington "Lee #: 90604 " http://www.midwayusa.com/product/456506/lee-factory-crimp-die-223-remington?cm_vc=sugv1776391 "Lee #: 90817"

:wave: :rofl: and I am up just because.

I have a set of abrasive on one of my older gen2 G22s. It aint slipping out of my hand if it is covered in oil.

Welcome to the site, 1st round on the new guy, make mine a 25ACP, yea I am a cheap date, but not loose!

Looked like fun, thanks for sharing.

Guys please be careful bashing places to much, some just might be members here. Just a friendly heads up. :wave:

Out Post Armory has a few dies, give them a call.

We can not forget "RAWHIDE" and Clint.

Maybe a sign like the guys put in the barrel of a for sale rifle. :rofl: I did see a few gas blocks, but none were adjustable, and not one left hand bolt. The looks I get when I ask is priceless.

Good looking dog, congrats.

All right brasco901, how about some pics for us hounds?

Another David, great, I have to remember so many. Welcome, just one rule, newbe buys 1st round, make mine a 44 mag.

Got to see David to pick his brain, David you looked well rested today. That 50 looked cool as all get out. Pick up a stock for a 10/22 from Ken Arnold, great guy!

John Wayne is my pick. RD was good in Jack Reacher, but in "Second Hand Lions" he was great.

It will never work, you need to pay me, O lets say, 5000 dollars and I will "fix" it for ya. :wave: :squint: :rofl: Yea shorten the lower one and you will be set.

"A lot of this stemmed from -- there was a domestic situation there on the 14th of January with the grandfather of Kayleigh's child was arrested for domestic assault," said Smyrna Police Chief Kevin Arnold.   "You had my dad arrested?!!!"   Just might have something to do with it.

We are to old to fight,  just take care of business! Good job on being aware.

If you are milling with the chuck I can see why it broke. Get you a set of these that fit your mill. If yours is a R8 taper. http://www.ebay.com/itm/R8-Collet-Lot-/201018663461

The HF mills I have worked on had a bolt in the top of the shaft that holds the quill in. Just loosen it about 3 good turns, them pop it with a soft hammer, lead or brass will work. In a pinch a block of hard wood and a steel hammer will do the job. This style has a key the keeps the quill from spinning in the shaft.     If there is no bolt up there you will need a piece of steel to poke through the slot on the shaft to knock out the quill. This style has a tang that fits a slot up in the shaft to keep it from spinning.

Dadburn cool, I likey!!!

This times 1000 The 2nd does not define what "ARMs" are. All gun laws are unjust as to what arms can be owned.

Yep, good call on getting the help.

Welcome, just one rule, newbe buys first round. Make mine a 7mm Rem Mag.

Well depends on what you look like naked.