RED333

BADA$$!!!

I am with yall on this, looks like a set up, be safe.

After a year you should have a TN DL, that is all that is needed and be 21 years old.

I bet with a happy switch I could give a good try.  

My prays to the family. Swift justice to the ones that took his life, and I hope they rot in hell!

Be very careful using them in a revolver, some do not make it out if the barrel, this is the voice of experience.

Make your own http://www.midwayusa.com/product/369899/lee-2-cavity-bullet-mold-454-diameter-round-ball http://www.midwayusa.com/product/226848/lee-1-cavity-improved-minie-ball-bullet-mold-454-298m-454-diameter-298-grain and never look for them again is what I do, even make my own caps.

Are you handy with tools, do you have a circular saw? You can get a blade for the saw, cut a square hole for the vent, and cover the extra with a piece of sheet metal. http://www.lowes.com/pd_77393-70-DW4712B_1z0wckv+1z0zvc3__?productId=1100827&Ns=p_product_qty_sales_dollar|1&pl=1&currentURL=%3FNs%3Dp_product_qty_sales_dollar|1%26page%3D1&facetInfo=Yes There are round cutters that are run by a hand drill, http://www.zoro.com/i/G2812555/?utm_source=google_shopping&utm_medium=cpc&utm_campaign=Google_Shopping_Feed&gclid=CMTBqYn1uMECFdHm7AodMkEAPQ a bit more money,

Glad ya got it done and thanks again for learning me something, O, and the fun.

Guns and leather, Hendersonville or Greenbair store.

I am gona say 18 is the magic number.

Just 2 words, DUMB A$$ Lasers are not to play with in that way, getting the dog or cat to chase is OK

I said thread file, not triangle file as the angle will be wrong. http://ads.midwayusa.com/product/728512/general-tools-thread-repair-file-for-metric-075-10-125-15-175-20-25-30mm-threads?srccode=cii_17588969&cpncode=34-253464573-2&ads=&cm_mmc=pf_ci_google-_-pf_ci_google-_-pf_ci_google-_-pf_ci_google

:cool: never on the first date :rofl:

Well we are Brothers in Arms, yes?

Worked for me just now, signed.

125 yards is the farthest I can shoot at the house, so 100 yards is the range. Yes, bench and rest, will be a bit before I try, need a chronograph to clock the rounds for FPS.

As I had no idea what you are looking for I had to google it. Learned me something today, thanks. No I do not have one, and no way to hold your barrel and not mark it up but good. Now if you want to try some wood and leather I might be able to help. Good luck

The Russian AK rifles are threaded left hand for the brake, 14 TPS I think. I have a few thread files, one is metric, will work for left and right hand. The file will clean up and cut threads with some work. Picked up the set from e-gay.

Chase? Do you have to use a die? Would a wire brush work to "clean" the threads? OH, OH PICS!!!

So sorry for your loss, prays on the way.

My goal is to shoot a boolit I cast, powder coat, and load to over 2500 FPS and hold a 1 inch group. With jacketed it is doable, however with cast it is a long road. Cast boolits come apart when twisted to fast, some tend to "slip" past the lands of rifling. Some go way out of balance, this the "want" to do things right.

Yep, no power needed, and we have 9 dogs, from 3 yappers (inside) all the way up to 2 (1 in and 1 outside)that come in at over 70 pounds. We know when someone comes up the drive, much less into the house.

A fish rots from the head down, this guy is about at the bung hole level in the fish.

Sounds like you made a good move, I will bet my last dollar you wont leave with that list and what not.