Johnny Rotten

My firt choice would be: mini gun, 240 bravo, M60 some joker last yr posted a utube video on M4.com in the nfa section, using a mini gun on a tri pod shooting hogs in texas, he pulled the video after 20+ negative comments about his hunt...

Colt LE901

I just checked the demisions out and you are correct, I would have never thought the Raptor was that wide, were arguing over .200+/- LOL...I've only seen them passing on the road, I'll have to check one out up close, the only thing I'll argue is their probably mearsuring off the fender flares, so the H1 has probably a foot wider cabin....I'm guessing that since my daily driver is a F150

I don't know what a first generation Hummer is (maybe an H2), there is no way a Raptor is 1" wider then a H1, I have to fold the drivers mirror in just so I can drive inside a 9' garage door opening.

I meant the fenders not the bumpers, our prerunner trucks back in the day used fiberglass fenders, i'm pretty sure they wouldn't use that set-up on a production run truck. Yep running boards need to go, I've seen several trucks around Tn with bent up running boards.. The wife to calls my truck a Money Pit = HMMWV = High Maintanence Money Wasting Vehicle

Did they ever redesign the frames from breaking? or is their answer a frame brace? I lived most of my life in the deserts of Ca, I've owned several prerunners and my buddy raced trophy trucks, same buddy told me a couple yrs back one of his friends bought one and used it as a prerunner and broke it into two pieces, I know of this guy and it wouldn't surprise me at all he did it on purpose.. Curious are the front/rear fenders composite material or metal? BTW, nice truck

You might want to check out Colts LE901, I'm currently on a waiting list for one, retails for $2099 shipped, that's the best price I've found so far...

Several wks back they bought a FA HK36 for 5 grand, after the guy walked out the door they said they'll sell it for 8k, it's a 20k+ gun duh!!

That gun won't wake up the neighbor's, it wake up the whole darn town... Not sure what I seen on sturmgewehr for $50 bucks a peice, it must have been AP or ?? or a guy asking the world for practice ammo

what does a round for that cost? I've seen realoded 20mm go for $50ea on sturmgewehr

what do you sell? seen your add for pmc, do you buy by the case or pallet?

Carefull, My buddy owns a farm in Lincoln county, we shoot all type's of legal FA out there, if we knew we were bothering someone, we'd break out RPG's and mortars if we had them ....

I buy my FMJ or API rounds for $2.14ea delivered. My Barrett owners manual stated if you remove the brake and shoot it you'll void your warranty, BTW it also said it will increase the recoil by 70%.....

slightly loader then a 22 rifle

A 50 recoil isn't that bad, your going to need to shoot it off a bipod or bench rest unless your super strong and able to hold a 5+/- foot gun that weights 30-40 pounds and forget about accuracy...

Sorry reread it, yes I'm a youngen with 88 posts, I'm new, I only found the TGO by accident while searching for local ranges, lets test your skills (Mr.777), tell me what you see?

I don't get it, you asked for suggestions on a open forum but only williing to accept a SME, maybe you should have used the PM button.

that's odd, it usually takes a matter of days for them to cash the check...

One thing not mention, you could go with a 556 can and shoot 22 out of it, you'll pay more but you'll cover 2 calibers you mentioned, I have a YHM 556 Phantom and have shot both out of it, while the 22 round is very dirty, YHM emailed me stating it was ok to do this and told me to soak the suppressor in mineral spirits over night and blow it out with compressed air after 1500 rounds, I have since sold my 22 stuff and only shoot it on what it was designed for.... One more tip you might what to check one out in action, so your not dissapointed after your approved and you realize it's not that quite... I have also shot 22 out of my 9MM Bowers fullsize can, I don't think that's a bad idea, to get a baffle strike would require something major to happen (can loose, etc), BTW this set up wasn't quite either...

No issues at all with WPA "steel case, polymer coated", it's a little weak and really dirty, you might need to change your buffer, this is what's left of 30,000 rounds I purchased last yr

luckly you.... my first stamp the dealer used a company check so I had no way of knowing when it cleared and they wouldn't call, I kept calling BATF about every 2 weeks to see if I went pending after 2 months, I told my dealer, dealer said sometimes this happens, waited another month, kept calling, called the dealer again told them something is definitely wrong, turned out BATF rejected the letter 3 months prior due to a USPS sorting machine ripped a hole in the envelope, it was returned to the dealer where it sat in a inbox of a deployed employee....luckly me....

How could they sue if the gunshop was his home as well? anyways good guys 1 bad guys 0

Posted Yesterday, 05:55 PM Could you see the flash and hear the impact of the API round you fired out of my AR50 or yours? Those rounds tickle the crap out of me every time they impact! You realize you were shooting 3/4" steel plate, at 200yds(8900# ft/lbs of bullet engery) and 300yrd (7900# ft/lbs of bullet engery) yes I heard and seen the flash, There was 2 guys next to me showering me with AK casings shooting the 200yrd plate, when they were reloading, I sent 5 API rounds rapid fire into that plate and knocked it down.. So how do you like the AR50? I know it doesn't compare to a semi auto M82A1, but was it better/worse than you expected? I'll allways say a bolt is more accurate then a semi, I do beleive if your going to shoot longer distances your going to need a more powerful scope, bipod and mono pad. Really enjoyed meeting you and seeing those excellent shootin' irons you brought out as well! We'll meet up at the range again soon!

You left 1/2hr to early, a guy and his wife walked up to me when he seen my rifle on the table, and asked me what was my favorite gun, he was disapointed when I didn't choose the barrett, turns out he is a Barrett factory salesman, they were shooting a REC7, FNH (didn't see the FNH's) and a M16A1(<< I held this)...pretty cool dude...

That makes no sense, they would have been drop shipped from two different locations and came together at the shipping terminal, the driver would have never touched it with out a shipping label... unless the TV store and gun shop did shipping favors for each other and it got screwed up there...