LawEnforcementSalesTN

13 years of history I got a ton to delete before I'm back in the green ;o) .. contact included in image I attached my new email just so it's not in the white. I'll get around to clearing them here at some point. ;o( Thx, sorry for the troubles.

Hey Scout, I'll take this is it's still available. I'm in Hendersonville and can meet up with ya somewhere. Please PM me with contact info and I'll get back in touch with ya. It's surely been a hot minute since I've been on the board and my inbox is way past full so I'm gonna have to clean it up before I can start any new conversations. Thank you sir!

Had a buddy point me to this. I apologize, thank you for bringing it to my attention. I don't get to visit the site as much as I use to. I'll go correct the website. GoDaddy migrated our email few months ago and the old info@ is no longer routing. Dropped the landline as well just have my cell. michael@lawenforcementsalestn.com will reach me if you still need help. For those who I haven't seen in a while, I hope you all have been doing well. thx!

Thank you Bill, pleasure to meet you as well. I appreciate you took the time to drive up and see me!

Since moving the shop to OS several years ago, I've been keeping pretty steady hours of 8:30A-5:00P M-F I've been doing quite a bit of machining/labor jobs for other FFL/SOTs across the country but I still do general smithing as I always have. I do still ask folks to text me before they make the drive so I can confirm I'll be around. (803) 517-5448 is my cell. And of course email is welcomed as well Thanks guys

Hey Bill, sorry sent ya an email. I dropped this and I apologize for that. Bad at reading stuff at night on my phone with intentions of coming in next morning and responding. Trust me, annoys the wife too ;o) Comcast has my phone all jacked up so I'm not getting any voice messages. Still here, in Oliver Springs now but as Bryan said I haven't been able to browse the site like I use to but happy to help you all if I can. Miss you guys! Hope everyone has a Merry Christmas!

Sorry kids getting back to school and traveling last few weeks. I'll be back at things next week if you want to drop it off. I'm normally there 8:30-5 daily. Happy to help Thx! Sent from my iPhone using Tapatalk

Sorry, hadn't been on in a while .. I truly appreciate anyone and everyone looking out for me, God knows I can use all the help I can get ;o) .. no offense taken I feel it was delivered with positive intentions of concern. As for my Posse, as always, I appreciate the kind words and your confidence in my abilities. Stay safe guys!

bump

Refleks thank you so much for filming this for us. Kris and I would like to get you to the shoots you can attend with us as staff if you're interested in doing this for us. We can work out some payment or happy to let ya burn through some free ammo on the guns if you'd like. Great compilation buddy! Thank you again! Sent from my iPhone using Tapatalk

Hey guys, we're bringing all our toys for you to shoot... if you can make it come out out.... expecting this will be our biggest shoot yet. We'll have our minigun and new M2 Ma Deuce and 30-40 other machine guns. Bring the family and spend a day with us shooting all kinds of fully automatic firearms at our Memorial Day Machine Gun Shoot. Join Law Enforcement Sales, DTV Tactical Innovations, Midsouth Shooters, Mission 22, Beltfed Brothers, and American Made Tactical for a family friendly day of fun. $15 gets you in the door and the only thing you'll have to purchase is the ammunition at the range for the machine gun(s) you want to shoot. We'll even have a minigun for you to shoot and a special surprise target for you to shoot at! Delicious catered food will also be readily available for purchase as well.

bump

I have an impact so don't sweat that ... come to think about it I believe I bought it for those dang KSGs ;o) .. not too much in the gun world requires impact power - ha .. Just come on when you're ready buddy .. ping me and let me know and we'll be sure I can knock the lower out while you wait. Thanks!

I got one I made you can borrow.. it's two pieces .. just pm me your mailing info .. best to remove with impact wrench or you can crack the plastic very easily .. Had a couple DOE guys mess theirs up pretty quick but coming straight in with impact reverse comes off like butter. They do not need to be reinstalled that tight worse overkill I've seen in a while.

Bump Sent from my iPhone using Tapatalk

If getting cards done on non ATF supplied cards you'll need to overstamp/sticker/write the following in the ORI field. This tells the FBI where to send the prints back to once they've done the background. Will save a few weeks or more in them floating around trying to get back. Where ever you get them done should have cards, they prefer the FD-258 (blue on white background).. I've seen them take others and also seen them reject others just FYI... WVATF0800 ATF-NFA BRANCH MARTINSBURG, WV You also need to complete a few items on the prints cards.. enter you SSN, Sex, Race, Hgt, Wgt, Eyes, Hair and Place of Birth (City and state) Reason can be 'NFA' I'd suggest getting extra sets of cards and photos done while you're at both locations for future purchases. The cards are good for a year... if the place doesn't date them you may can get by longer.

bump

Gunsmithing Services View Advert Hey guys, many of you know me here but I've had a lot of folks inquire about services or see something and not know that I offered that. My biz name is a little misleading I apologize for that. I'm a full service gunsmithing shop that does 99% labor type work. I moved my shop to Oliver Springs a little over a year ago. Things are running great so I wanted to throw this out there in case you need anything I can provide. First and foremost I will work on almost anything. I have been working on guns for 35 years now. Started off at my grandfather's pawn shop back in the early 80s. I moved to Oak Ridge in 2008 and opened Law Enforcement Sales early 2010 and have been steady smithing since. Since inception I have had a 07/02 manufacturing license for both title 1 and title 2 firearms. Began heavily on the LE side but my customer base has grown more than I could have ever imagined and I now do way more work for the general public. Little about me, I have been a commissioned law enforcement officer since 2001, worked 7 years as a SC State Constable working all over the state. I am currently serving as a Sergeant with the Anderson County Sheriff's Department which I joined in 2008 and have been an active Reserve Deputy with them since. I am also a VP at Wells Fargo bank working in their securities/loss area as a Software Engineer. I've compile a list of things I usually work on but again, the sky is the limit. I will 100% be upfront if there is a job I am not comfortable with. I have not done everything but I have found I tend to get the more difficult jobs around the area none of the other smiths want to deal with. I feel my prices are very competitive and I always charge what a job is worth not what my time invested is. Services Sales Affiliated with most the industries distributors. I don't do much retail because of TN's sales tax it's currently impossible to compete with the internet. I want you guys to get the best price you can but I do have those customers who want to buy from me and I don't mind helping search something down and getting it. I am a East TN SilencerCo SPEQ dealer. They offer great prices to LE, Military, First Responders (EMS, etc.). Call for special pricing. They offer a couple times per year this discount to Veterans too. Transfers Title 1 transfers - $20 INCLUDEDs TBI background. I WILL accept transfer in from private parties and it doesn't matter if I can get the item or even have the item in stock - no games! Title 2/NFA transfers - $35 - I'll happily help/review your paperwork. Been in NFA for 30 years. Barrel Work Shortening Threading - most done on CNC Lathe Crowning Pinning (compensators) - installing and removing Contouring Head spacing Install AR Extensions / replace broken alignment pins, etc. I do some chambering.. full barrel blanks (7.62/308/9mm/7.62x39,22, etc.) .. and existing re-chambering ...40 to 10mm, etc - will be offering additional calibers as they come. Receiver/Bolt Work Engraving - NFA, Images, etc. Extractor installs / Sako M16 extractors, etc. Bolt knob threading/installs - Badger, etc. Changing bolt face calibers (where feasible) Receiver / Bolt face truing Various repairs Parts Kit Builds/Repair HK Style - Can roll/weld flats, demil parts kits, build 922 compliant semi autos. AK Style - Can roll flats, weld rails, Rivet trunnions, trigger guards, stock trunnions, etc. (NoDak is so cheap it's probably moot now but can do it either way) RPDs PKMs - Designed a new semi trigger pack that utilizes 99% AR internals. Custom machine a new hammer and recoil assembly. My conversions do not use that ugly recoil rod that most do that has to protrude through the middle of the rear stock. Everything is internal. MACs UZIs VK59s List could go on and on .... ALL of the above can also be machined to post sample select fire status for LE agencies Refinishing Parkerizing Cerakote Duracoat At the moment I do not do cammo patterns. Sorry I have a couple of master refinishers I can refer you to for those services. Handguns RMR/Reddot milling -not just flat, proper radiused front WITH all 4 indexing posts (RMR) Slide serrations, windows, etc. Sight removal/install Dovetail milling Recoil/Hammer Stud replacement (revolvers) Cylinder Reaming/Honing Picatinny/Weaver rail drill/tapping, etc. General repair / parts replacement If I can't find a replacement part I can often machine something. I do a lot of fixing stuff.. machine guns, rifles, heir looms, etc... Custom Machining Above is just a sample of services I can do. I have 2 production class HAAS CNC machines, both a Lathe and a 4th Axis VMC. I also have a 54" Monarch lathe that I haven't ran out of room with and an old Bridgeport milling machine. Old 1940s vintage good stuff! I do odd work on non guns stuff too - Motorcycle parts, RV car parts, you name it. I co host a 3-4 machinegun shoots across the states and neighboring areas per year. If you'll follow my facebook page https://www.facebook.com/LawEnforcementSalesTN/ or our hosting page https://www.facebook.com/search/top/?q=beltfed brothers we'll post our event information. It's a nice opportunity to get some real seat time behind a lot of the equipment we don't normally get to shoot. We have a M134 Minigun (4K rd/min), Several M60s, M240, couple of M249s, M16s, Mp5s, slew of other fun stuff. Don't be Knob Creek and watch come shoot for yourself!! I also post smithing jobs I'm working on as time permits. Feel free to IM or email me for any service questions. Thank you ALL for your continued support! Stay Safe! Michael Dresner Law Enforcement Sales Advertiser LawEnforcementSalesTN Date 03/09/2017 Price $1.00 Category Vendor Sale Postings Caliber Manufacturer Law Enforcement Sales Type of Item 4,5,7,8,9,10

Pm returned Did this 20ga last week along with a Cerakote job on the receiver and barrel. Seemed to be the week for scope mounts. Had a couple of MkIIs thrown into the mix as well. Sent from my iPhone using Tapatalk

Use to be able too back when ATF supported the mailable 4473s (we'd send affidavits and copies to local LE, etc.) AND us dealers did NOT have to do a background check when picking up ... now it's a double edge issue in TBI requires on 'premise' or in person BG checks AND ATF requires us to do a 4473 on the item being picked up .. they discontinued the mailable 4473 to the best of my knowledge. Some folks still do but I honestly don't think it's per the letter of the law... As it relates to dealers ... on a personal note for in-state NFA approvals between 2 non licensed parties seller can mail to buyer once the form is approved .. kinda one of those loopholes like an 18 year old being able to buy private buy personal NFA but a dealer can't transfer to anyone under 21.... or when I was in SC you could legally marry at 17 but couldn't have sex until you were 18 years old ;o)

Rocksett is impervious to heat .. up to about 2000 degrees ... it should come off .. it's going to pop loose if you can get enough torque on it .. what length is your barrel? if it's 16" total with the compensator it very well may be pinned and welded.

If you don't find a local smith or don't mind shipping I'll help ya out.

This weekend guys!!! Mark the calendar!

Check with DTV Tactical in Hendersonville.. he just got a new blaster like mine shouldn't be a problem at all.

Hey guys, Kris, Mark and myself are planning another machinegun shoot at Flashpoint Tactical on November the 12th. No car this time, but even more guns than before! Everyone please share this and help promote this event! It's last minute so help us spread the word to make this a great event! **** 11/8/16 update - sorry guys this event is going to have to be canceled. We're working on an alternate place and will update with a new time as soon as we can find somewhere ****