MrBrian

Bought two guns in 3 days, both are chambered in 6.5x55. On top we have a Norwegian Krag Jorgensen. Best I can tell it's a model M1894 that's been turned into a civilian target rifle. The rear sight has been removed and a new handguard has been put on it. Not exactly sure where someone would have found a handguard this style that fits the rifle so nicely. The barrel and receiver match, along with other parts such as the barrel bands. But the stock and bolt have different serial numbers. Also what's odd, is the buttplate doesn't have an opening for storing a cleaning kit, even though the wood underneath it is drilled out.... But the buttplate matches the stock numbers, so who knows? Currently, it has a Lyman 57 SME peep sight. I looked into getting a rear sight and returning it to it's original configuration, but that will cost around $500 to do so, so for now, I'll just enjoy it as it is. The rifle on the bottom is a Swedish m94 Carbine, and it's my favorite of the two. Sure the rifling of the bore is a bit worn, the sling isn't leather, and the slide on the rear sight needs a new spring, but it's just such a cute little fellow. It's a cock on closing bolt, similar to the Lee Enfields, smooth operating, easy to disassemble/ clean, and coming in at 37 inches overall, it's a handy size. Seeing that the Norwegian Krag's aren't able to handle the higher pressures that the Swede can, I'll have to shoot up some of my commercial brass so I can reload for the Krag as safer pressures, but that's no big deal. Hope to get these both printed on paper relatively soon. I'm sure the soft recoil of the 6.5x55 will make both of these sweet shooters.

I'll be sure to get that right out to you

I have one MG13 mag that came with the Ljungman, haven't tried it to see if it also holds 8mm for the Hakim. And I have a good gas tool, I cheaped out the first time and the brass tool bent on me trying to get the Rasheed's screw unstuck, but they're all working properly now. And as far as ammo, I have PPU

Finally got the Hakim in and completed the trio ( Ljungman, Rasheed, & Hakim) The Garand just happened to be in the same room, so it too made it into the picture. Sorry for the crappy lighting and the wrinkles in the background

Finally acquired a WWII Springfreld M1 Garand. Serial number says it's from May 1942 that was rebuilt in 1947. She's greased up and ready to go to the range. I want to get some accessories for it, like a cleaning kit, bayonet, ammo pouch, but I'm trying to not spend more money right now! Hope you enjoy h

Will you be shooting paper targets, or 4 legged creatures?

For me, the 6.5 Swede would be nice cause I've already got a 96 Mauser and a Ljungman, and I reload for those already. So not having to reload yet another caliber would be great. Sadly, I haven't had either of my guns out to distance yet, and can't say what kind of groups I'm getting on paper. But from what I've read, the 6.5 Swedish should make a good contender at distance for an average marksman. The BC of the 6.5mm bullets are great. I also can't say anything about the Howa rifles, but I'm glad that manufacturers are still building rifles for the 6.5 Swedish round.

I didn't have the $1700, nor the C&R License back when wideners had guns..... Better late than never

I was one of the lucky few to get one of the K11 carbines from Classic Arms' latest batches. Very pleased that it's not soaked in cosmoline, and that it has all matching numbers, and included the trifecta of accessories (sling, muzzle cap, and troop tag) Too bad the troop tag is not legible, but it does have a number matching the rifle, and the guy was in the army reserves and lived in Burgdorf. This rifle seems to be a conversion from the Cavalry Carbine Model 1905. Based on the fact that it's about 1/8" to 3/16" shorter than my K31. Also, it falls within the serial number range of the converted ones, in the year 1916. It has a "T" after the serial number, which I believe is an inspector stamp, and it has a P below the number with means the soldier kept his rifle. There's also a "35" stamped below the serial number, and the only thing I can come up with for that is if the rifle was refurbished at the factory in 1935.

So, I just printed off a 50% scale for me to practice with at 50 yards, and holy crap! the target is smaller than a quarter at 50 yards..... this will not be easy, but I guess that's why it's called a challenge I just checked, and it's smaller than a nickel at 50 yards

I bought a Primary Arms 4-16x44 scope so I can give this a try with my Ruger American Rimfire.... It's hard to see that far with a 4x Leupold!

I thought about that, but that would kind of be cheating because you don't have the 40 extra yards of wind to account for... I'll probably just do the regular target at 60 yards as practice and then do the real challenge at the range..... Either that or I can shoot from my neighbors yard all the way across mine, we'll see

The sad part is that I only have a 60 yard range behind my house.... so I'll have to wait until I go to the actual shooting range for this one

This will be a good excuse to get my Ruger American Rimfire sighted in..... that'll be a tiny circle at 100 yards

Welcome to Das Luger Club

Enjoy some semi-glamour shots of my Luger.... I tried to show all the imperfections in the finish, along with the identification stamps. Not horrible condition to be 98 years old. http://imgur.com/a/NBfPn

I've been broke ever since I got my C&R

Minty fresh

Well, you see, I've been on the market for a nice Garand, but every time I have the money to buy one, I end up with something completely different. This time I thought I'd upgrade my carry gun. And I wanted a good quality 9mm. Then, I was sitting around the house, waiting on a repairman (who never showed up) and I ran across this gun on a forum.... I sent him an email, and the next thing you know, I've bought a 98 year old P08 Luger.... We shall see how good or bad of a deal I got in a few days, until then we all must just drool over some pictures

9

No where near mint, but great shape for what I can afford

But I did buy this! This picture is just a teaser until it comes in

Gotta love those polyoxybenzylmethylenglycolanhydride handles

The DA trigger is heavy, yet smooth and very acceptable for a military gun. SA trigger is quite amazing IMO. Not a ton of info online, but best I can tell, this was made in either 1935 or 1936. Now for pictures, please don't hate too much cause my lighting and background suck on these. http://imgur.com/fm0D8gI It's super easy to disassemble. Pull one pin, and one screw and you get to all the innards. http://imgur.com/h47FMT4 Waffenfabrik Bernfactory maker mark http://imgur.com/dYDDhGq Love that the importer's mark is tiny, and well hidden under the ejection rod. http://imgur.com/1kz2hBc The brass cleaning kit is awesome, complete with jag, brush, and the screwdriver doubles as the extension rod. Love how the Swiss make things so useful and compact http://imgur.com/RAFSs0j This is the worst of the machining marks, on the grooves of the cylinder, but really only visible under a light or camera flash http://imgur.com/3lokgfI The Swiss crest in all it's glory http://imgur.com/rs4ZhBl Spring captured pin that holds in the cylinder. For it's age, I find this a fascinating piece of the gun's engineering http://imgur.com/1j2EK1E Best sight picture I could get on camera. Not the fastest acquisition for my eyes, but I think with slow SA shooting, it will be good out to 50 yards fairly easy http://imgur.com/L8YT72g I love how all the small parts are stamped. You can also see the worst of the finish wear on this particular gun at the tip of the bore. I assume from honest holster wear http://imgur.com/8Ufdf9C Front post.... It's somewhat adjustable for windage That's all for now

Revolver came today and it's a pretty amazing feat of machining for it's time. The leather needs some tender, love, and care, but that's to be expected. I'll post pictures soon, but am too tired to setup my camera and everything right now.