DJTC45

Mid week bump.

Their not bad, and even though it takes Glock mags. that's a plus compared to any other 2011 mags. at $50 and up.

I use one of the Vertex Comuter Sling bags in gray so it doesn't "scream tactical". They are offering 15% off. https://vertx.com/

Monday morning bump.

Back up, this brand has been around for quite awhile, look them up and see. Thanks for looking.

Here's a SA35 9mm that I bought new, and added a few things. A set of XS Night Sights, Cylinder and Slide extended Thumb Saftey, and a flat Trigger. Comes with everything shown, Box, Paperwork, Three Mags Two 15rnd SA Mags and one 17rnd Apex Mag. There is a mark on the back of the grip(see pictures, it was already there when I bought it but did not notice it till I got home to wipe it down and put it up, orginal trigger and safety included) The Flat Trigger breaks at 3.15lbs as shown, after I installed the sights, trigger and safety I ran one 15rnd mag with no problems and cleaned it and put it up. $650 CASH NO TRADES at this time. I live in the Whitehouse area and can meet locally around Goodlettsville, Hendersonville, Gallatin, and Nashville area but can drive half way to meet and complete the transaction. Any questions please PM me.

Looks great, can't wait to see the finished product.

Those are the most useless, and ugliest Truck(if you can even call it that) that was ever made. But look you came up with it and that explains it.

Hopefully the name change won't reflect on the type of service they're going to offer. I can't stand going into a gun shop that has either ex-cops talking about the "old times" and think that Glocks rule the industry or some blow hard who thinks his carry gun is the best and the rest are just junk, and also I hate it when there's a "person" who dosen't know anything except what's going on with Facebook on their phone. Whatever happened to the guys and gals that worked in these shops that actually cared about their customers needs and wants and offered good advice to them. Hopefully when "MODEREN WARRIORS" takes over they don't fill it with want to be "Operators" that have "never been there and done that" attitude.

That just goes to show that some who age get wiser, and some just stay plum stupid no matter what their age is. I'm glad you stuck around to explain what happened to the kids father. He should have walked down there and kicked him square in the ass for doing that.

Here's a lightly worn REVUE THOMMEN Swiss made 42mm Case Automatic Chrono Watch. 27 Jewel SW510a movement, exhibiton Back, Blue Dial with Box Paperwork and four Straps, Custom Blue Alligator Quick Deployment Clasp Strap, Blue Quick Deployment Clasp Nato Strap, Blue Rubber Strap, Buckle Deployment, and the Orginal Blue Leather Strap. I've worn this just a few times crystal is clear with no scratches, as is the case. $1100 CASH, OBO FTF. I live in the Whitehouse area and can meet locally around Goodlettsville, Hendersonville, Gallatin, and Nashville area but willing to drive half way to meet up to make the deal. Thanks for looking.

Thanks @willis68 got mine yesterday when I got home. Appreciate you doing this for the members on TGO.

Sunday bump.

Here's two very nice Packs. 1st- MAXPEDITION OD GREEN that I used for a range bag. Plenty of room and Molle Atachments for other gear. $75 SHIPPED.2nd- EBERLESTOCK OLIVE GREEN w/ Hydration Bladder(never used) I kept this one in my Truck for a "go bag" that I kept basic stuff incase of a break down or bad weather. $95 SHIPPED. PAYMENTS ACCEPTED ARE USPS MONEY ORDER PERSONAL CHECK both must clear before shipping,I also have a PayPal Account if you want to use that method please PM me for information, please Friends and Family only with no comments. I can meet during the week for FTF CASH if you prefer that, just need a heads up on meeting due to my truck is out of commission for a little while. Thanks for looking.

Back up.

Looks like a Trijicon SRO.

Here's a brand new RealAvid AR15 Master Builders Kit. This has everything you need to maintain or build AR15's. Tourqe Wrench, Complete Crows Feet Wrenches, Bbl. Nut Crows Feet Wrenches, Bench Block, AR15 Uper Bbl. Vice, Punches, ect... I also have a brand new AR1P Upper Bbl. Vice, and AR10 Pivot Pin Tool (the Crows Feet Wrenches in this kit will only fit the AR15, I was going to buy the AR10 Wrench Kit from RealAvid but never did. So If your building an AR10 you can purchase them) $400 CASH FTF for every thing shown. I live in the Whitehouse area and can meet locally around Goodlettsville, Hendersonville, Gallatin and N Nashville area for FTF. any further than that will require to meet halfway or I can SHIP it to you. If you need it shipped you can pay by USPS MONEY ORDER PERSONAL CHECK both must clear before shipping, I also have a PayPal Account if you want to use that method please PM me for information and Friends and Family with no comments please. SHIPPING will add $35 to the total. No Trades at this time.

I had one of the newer Colt 1911's in 38super. I liked it a lot, but my neighbor liked it more so I sold it to him.

Thanks, after I get it running I'll fit a Harrison Design 1911 Ingnition Kit. Includes Hammer, Strut, Disconnector, and Sear. I also might get a Kart Gunsmith Bbl. in 38super and fit it to the slide.

I will as soon as I get some time. That Bbl. Bushing fits great snug but still able to remove it by hand, and the Bbl. Lock up on the slide is tight but postive. After I run 100 or so rnds. through it I'll tear it back down and see what the lock up lugs on the Bbl. hood and the lock up lugs on the slide to see, and also the Bbl. Feet Lugs and Bbl. link are good.

And here's the final look, also installed a new set of Night Sights also. The grips are made by Wood Caliber and are made out of American Walnut. Now I'll tear it back down lube and hand polish some of the internals put it all back together screw on the grips and give it a go and see how it runs.

Here's the trigger and thumb safety I fit and installed along with a Wilson Flat MSH. The trigger took a little bit of filing and sand papering on the top and bottom of the shoe, but I got it fit with no play and polished the bow and tracks for a really smooth pull. Then onto the thumb safety, just a little filing and I got it fit. Nice and smooth but firm with a postive click and passed all the safety checks.

I bought this one a month ago, I decided to do some small upgrades. I added a new trigger,Wilson Combat Safety, Wilson Flat Wire Recoil Spring, Wilson 19# hammer spring, Walnut Grips, and a GI Battle Crown Bushing. After I fit the bushing I blued it using Cassie Bluing kit. It turned out pretty good. Here's some before pictures when I fit the bushing.and here are the after once I blued it.

That's a good looking watch. Very impressive test also, I have a few Swiss made dive watches and they are all Swiss Automatic Movement's. I'm going to check out the Oceaneva brand they look great.

Well when I post something for sale I usaly put the dollar sign in front of the amount sorta like this, $30.00 a oz. But if it bothered you because I asked a question well I could care less. Kennth stocker, I apologize but I took it as you had 30oz because I read it to fast, GLWS, free bump.