DJTC45

Here's a new SA35 with a couple of upgrades. I installed the XS Sights, Apex Flat Trigger(just the trigger I used the SA35 internals) and then I fitted the Cylinder and Slide Extended Thumb Safety(works great postive click on and off) it will come with the orginal Box and all the paperwork and three Mags- two SA 15rnd and one Apex 17rnd, and 50rnds. of 9mm Ammo. I fired one mag through it to check function and everything works as it should. $685 CASH FTF. I live in the Whitehouse area and can meet locally around Goodlettsville, Hendersonville, Gallatin, and Nashville area for FTF. Please PM me for any questions or if you need a certain picture. No Trades at this time. Thanks. 1- XS Night Sights 2- Flat Trigger that breaks at 3.15lbs 3- Cylinder and Slide extended Thumb Saftey

Here's one that I have in my collection. 1986 Masterpiece Smith & Wesson 17-5 22lr. 6" Bbl. Orginal Box, Paperwork and Tools, Orginal Target Stocks. No marks or discoloration in the bluing, slight turn ring on the cylinder and that's it. $985 CASH FTF. I live in the Whitehouse area and can meet locally around Goodlettsville, Hendersonville, Gallatin and Nashville area to meet up. No Trades on this one. Thanks.

Back to the top.

Monday morning bump.

Saturday morning bump. Let's give this one a new home, this has all top of the line HK Parts, I didn’t just slap this together every part I had to fit except the B&T Handguard. The Geissele SD-E Flat Trigger is amazing compared to the orginal SL8 Trigger.

Here's some more pictures.

I've got a brand new HK SL8-6 that I modified with some G36 parts. I believe this is the way they needed to be made. Comes with everything shown in the pictures, orginal SL8-6 Buttstock assembly and SL8-6 Handguard, HK Case, Four HK SL8-6 10rnd Mags. $2975 CASH FTF. I live in the Whitehouse area and can meet locally around Goodlettsville, Hendersonville, Gallatin and Nashville area. I can drive halfway if your further than listed to make the deal. I would consider possibly partial trades plus cash. I'm interested in S&W Pre-lock Revolvers, Bolt Guns in 308, 1911's Colt Springfield Armory possibly Wilson. Please PM me for possible trade or if you need some other pictures. 1-New HK SL8-6 Rifle, 20"Bbl 2- HK G36 Folding Stock 3- HDPS SL8/G36 Folding Stock Block Conversion 4- B&T Burgger and Thomet G36 Quad Rail. These are Swiss made for the G36. 5- Tommy Built G36 AR Style Lower that takes AR Trigger Group 6- Geissele SD-E Flat Trigger Group. This is a big improvement over the stock SL8-6 trigger that was close to 8lbs the Geissele SD-E breaks at 3.15lbs. 7- Magpul Bi-Pod

Back up. Thanks for looking.

Looking good sir, those leather sheaths look good also. Nice work.

Nice, I'm still waiting to hear back from the gentleman who has one like that with the orginal box.

Thanks sir, I've got to study up on the box codes.

Thanks for the information, I've gotten a few comments on another forum that questioned them to be orginal to the gun. I did find a 4" with the Combat Grips and orginal box so we'll see.

I got this one last week, S&W 17-6 22lr 6" Full Lug Bbl. Orginal Box. I'm not sure about the Grips, it has a set of Target Stocks, but every other one I've seen has had the Combat Grips. Here's some pictures.

Last call.

I'm in.

Monday morning bump w/ Price Reduced $650 CASH FTF.

Up to the top.

Back up. This has some good upgrades. XS Night Sights $120 APEX Flat Trigger $55 Cylinder and Slide Thumb Safety $65 Over $200 in new parts, this would make a good carry gun for someone. Let's give this a new home.

Back up.

Well I can see this is going no where, so I'll bow out to the great Glock Mag Guru. I'll still continue to buy the 2011 models and 1911's over the Glock. So have a good day.

Let's bring this one back up from the dead. Forgot about posting this.

I've dropped my Staccato mags on the ground, and never had to take them apart to clean. Also I think you missed my point about what I said, cost is a + I never said they weren't reliable with that being said I'll never own a Glock there's nothing special about them. Every model is the same as the very first one and I did at onetime own several, but not anymore.

Weekend bump, I've been asked if this one is one of the earlier models that had problems and no this one is the newer model. Also it was mentioned as to why I did the upgrades then only run one mag through it and decided to sell it, I have one of the first runs that I'm completely going to rebuild and also I'm looking at another S&W, so this one needs to go to make room. For anyone I've delt with in the past, you know that when I work and upgrade guns and sell them they aren't just thrown together and passed off. Let's give this one a new home. Thanks for looking.

Thanks I can't wait to get the other upper and G36 parts kit in to build the other one. Hopefully that low profile rail will be in soon so I can call that one done.

Well I ran into a little snafu, I got all the parts in and started to fit them and then noticed that the SL8-6 reciever has a indentation on one side that needs to be cut out and flipped around(see pictures) wicih isn't difficult to do but requires that part to be reattached so I decided to just leave it as is.but I did get a few other parts fit and installed. A ambi mag release, and a orginal Swiss Made B&T G36 Aluminum Handguard, and a MagPul Bipod.I did find a company that makes a G36 Upper Reciever, they can't mark it HK but it is an exact copy, so I placed my name on the order list and hopefully it will be done by the endd of the month. I also have a G36 Parts Kit on order that includes everything except the receiver, so when I get all that in then I'll start the G36 build. Here's a picture of the SL8-6 with the new handguard I'm waiting for one more part a Tommy Built low profile rail then figure out what type of scope to put on it thinking ACOG, or a Meprolight, any way here it is minus the low profile rail.