DJTC45

My apologies to TGO. Member Whisper sent me a PM and told me how to fix it, and it did. I was able to add some more pics to my adds.

You shouldn't have to use another picture app to post your pictures, this is getting old on here and a pain in the @$$ in the classifieds section for me, I've shrunk and changed my phones camera settings until I'm about to take a damn hammer to it.

I've been dealing with this photo problem on this site for sometime now, I just posted two adds in the Firearms section and in the first add it only let me load one picture, the other add won't let me post a picture at all keeps telling me file exceeds 21.5 whatever that means, I've changed every setting on my phones camera and it still does it. I wish this site would get up with the times, on all the other Forums I belong to I don't have a problem posting pictures. Good god update this site to the 21first century.

Here's a brand new Remington 870 Super Mag. 2 3/4"-3"-3 1/2" Chamber. I bought this for Turkey season it has a 21"Bbl. with an Extra Full Turkey Choke, didn't come with any other chokes when I purchased it. I've never used or fired this one. I can't hunt anymore due to health issues. I'm asking $575 or best reasonable offers by PM. First to post "I'LL TAKE IT" gets first chance at it. I live in the Whitehouse area and can meet in Goodlettsville,Hendersonville,Gallatin and can drive a little to make a deal, if you want a couple of more please PM me your email address and I'll send them to you. Any questions please PM me. Thanks. Fixed here's a couple of pics.

Here's a Ruger AR 5.56, I bought this from here awhile ago and just put it away. This one has been camouflaged by the previous owner, he did a good job on it. I don't know the rnd. count but it doesn't show any wear on the Bolt, or Reciever. It has an aftermarket Aluminum Free Float Rail, one P Mag.(I might have another one or two just got to look) no Sights, this is the way I bought off of him. I'm asking $725 or a reasonable offer. I live in the Whitehouse area, would meet around here, Goodlettsville, Hendersonville, Gallatin, but could drive a little to make a deal. Please PM me any questions you have. First to post "I'LL TAKE IT" followed up by a PM gets first chance at it. Here's a few pictures. Thanks for looking. Fixed here's a couple of pictures

They need to make one with a bunch of orange road construction barrels and say "WELCOME TO TN. HOME OF THE POTHOLES AND NEVER ENDING ROAD WORK" I live up in the Whitehouse area and 65N should have been 3 lanes to the KY border a long time ago, it's become a parking lot headed that way even at 1pm in the afternoon even before the construction started.

Last bump to the top, then back in the safe, I'll still do a partial trade or best offer just PM them to me. Thanks for looking.

Back to the top. You won't be disappointed if you purchase this Custom Remington 700. Thanks for looking. Surely someone would like to purchase this one. Will accept reasonable offers and possible trades for a Semiautomatic in 308, older 1911 Colts 1979 and down, I'm into the pre-lock Blued Smith&Wesson Revolvers. Please PM any reasonable offers or Trades.

Price adjustment, would consider doing a trade, only would be interested in M1A, older 1911's, or Staccato 2011's. Thanks for looking.

Wilson CQBE is sold. Thanks Grnad, and TGO. Let's get the Remington sold next.

Bump Custom Remington is still available. Feel free to PM reasonable offers. Thanks.

Wilson CQBE 45cal. Pending Meet up on Thursday.

Back up, feel free to PM me any reasonable cash offers, sorry no trades at this time. Thanks.

I've sold several guns and knives, and also purchased a few here also. Feel free to reach out to any member I've delt with if you have any questions or concerns about me. Thanks.

Admin's, I didn't mean to bump my add this early, these are the rest of the pics. for the Wilson CQBE, and accessories. 100rns of carry ammo, 6 ETM Mags. w/ extra spring kits, and all the paperwork that came with it. Flat Trigger, Green Fiber Optic Front Sight, Serrated Rear Sight, Flat Wire Recoil Spring Kit(new spring installed about 3 months ago and I've not put any rnds. down it since) the reason I'm listing these two guns are I don't shoot the Remington anymore it's been in the safe for three years and only has 300rnds. down it. The 45acp just hammers my hands ever since my cancer diagnosis that has caused Neuropathy in my feet and hands. I switched to 9mm Staccato's. Enough of the BS. here's the pics. again I apologize to everyone for the early bump. Thanks.

I've got a couple of firearms for sale. 1st. WILSON CQBE in 45acp. around 3000 rnds. down it. Flat Trigger installed $2200. I'll get some more pictures up with what's included. 6 Wilson ETM Mags., 6 Mag. Spring Kits, and some more small parts and Wilson Gun Bag(pictures of the gun and parts will be up this afternoon) SOLD. 2nd. Is a Custom Built Remington 700 by RITTEN PRECISION out of Louisiana. 20" Bbl. 308cal. McREES Aluminum Chassis in OD Green, 10rnd. Box Mag. Leupold 4×14×50 Mil. Dot Reticle, Atlas Bipod, Jewel Adj. Trigger(I'll get my gauge out and check the pull weight) two boxes of Federal 175grn. Match Ammo, I may have some more if so I'll update the add and post what else I've got for it. Asking $3000 for this one. Price Drop- $2650, again feel free to PM me a reasonable offer. Added a picture of the target that I shot after getting everything installed, I shot this group using the bi-pod while in the prone position I hadn't shot in that position for sometime. The range we were using only went to 125yrds. so I set the scope for 200yrd. zero using the ballistic chart for the Federal 175grn Gold Match Ammo. Thanks for looking, you won't be disappointed, the trigger breaks around 2# and is smooth as glass.. No trades right now, I'm located in Whitehouse TN area, would meet in the Goodlettsville, Hendersonville, Nashville area, but I'm willing to drive some to make a deal on either one of them. Please PM me with any questions or if you need some more pics. I'll post some more later on today. First to post "I'LL TAKE IT" gets first chance. Firm on prices but reasonable offers will be considered, please PM any to me. Thanks for looking, and I'll get more pics up this evening.

That one is made by KUSIAK Leather

From what I read, it's optic cut is for only one type of red dot, they will have to offer some other plates before I think about getting one. For now I'll stick to the four Staccato's that I already have, P DPO, C2 DPO, C DPO, and the 4.14 with full rail and standard sights.

I carry that way, I tryto choose a dark color it seems to help hide it more. As far as a brand I just buy regular t-shirts. Like stated above you need a good sturdy belt and a quality holster made for AIWB.

Praying for your son and family.

I just ordered one the other day, should be here by the weekend. I'm anxious to try it out and see how well it does. Once I get everything put together and adjusted I'll post back and try to post a few pics also.

I bought this work bench when Sears was closing. I got a heck of a deal on it I believe I only paid $160+tax, you can find similar ones on line or at Home Depot if you decide not to build one.

Let me know if you ever decide to part with it, I'd be interested. That's a good looking set you've got there.

That's about the going price for transfers, maybe hit up one and get to know them you might get a break but I doubt they will but you never know. I use Goodlettsville Gun Shop for all my transfers, I've never asked for a better deal since Philip is willing to do my transfers with out a problem. $35 bucks isn't going to keep me from using him.

I had one in 44mag, I bought it with an 8" Bbl. then purchased a 4"Bbl. for it. I used it back up home in PA for deer hunting, I really liked that gun until my truck got broken into when I stopped to get something to eat and drink on my way home, they stole it with the 4"Bbl. I really liked that you could change the Bbl's out fairly quickly and easily. I've been looking for another one but just can't find any. They are built like a tank.