DJTC45

What's your opinion on this. How are they going to enforce this with over a million in use. I bought a HKSP5 Pistol and in the package deal that I purchased from the Online FFL out of KY added in a SBS TACTICAL Brace, I installed it on the SP5. Now I've thought about doing a form 1, but I'm not sure. I wanted to do a trust but getting my nephews to do their part is like talking to a tree, they're interested but you know how 26yr olds are either to busy or something elese. This being the HKSP5 from what I've read I need 5 total USA parts to be in compliance, is this true I've got a Trigger Group that has 4 of them, and added a new Forearm. My question is, since I've been digonased with stage four Colon and Liver Cancer, so far I've made some improvements in my digonases but hey you never know. So if I was to form 1 it can I add in my will for my wife who is the one that everything goes to if and when I pass to be able to take it to a class3 Dealer to have them sell it for her? or should I just leave it as is, I don't know how they could possibly confiscate over a million of these. Any information would be greatly appreciated to help make this decision. Thanks.

I've been wearing this one lately. It's an Invicta Cetified Swiss COC Chronometer Automatic Movement, Meteorite Dial, 4.5cwt. Tasvorites, and 10pts. of Dimonds on the Winder. This is from the era when they were all made in Switzerland. I've got at least twelve more Invicta Automatics with the Swiss 7750 VALJUE Movements.

I also just ordered this from his latest drop. It's a custom Titanium Razor Knife he has been working on.

When we moved in here about 13yrs ago, I went into the garage and found the water heater sprung a leak. Well I drained it the best I could. When I went to start removing it I pulled the insulation off and well lets just say I cut all the copper off to the valves that was attached to the water heater. And spent two day's re-running it the way it should've been done the first time. I had to cut it to get the water heater out, they didn't put any unions on top and piped it directly to the heater. Once I got done cussing and thwoing the pipe wrench out the garage door, I just tore it all out. What a fiasco, and I'm sure my neighbors thought I was " Touched" from the cussing and well......

Here's a Custom Built Remington 700 308cal. by RITTEN PRECISION out of Louisiana. This one sports Custom Crowned 20" Bbl. and a PT&G one piece Fluted Bolt Bolt w/ Mini M16 Style Extractor. A few pictures show the bolt before I sent it to them to be Fluted (1st. Pic shows it in the White before I sent it out to be coated in DLC) The Trigger is a Jewel Brand Trigger that breaks right at 1# and is smooth as glass. Leupold 30mm Tactical 4.5x15x50mm Obj. Side focus, EGW One Piece Scope mount w/20moa built in, and 30mm Leupold Tactical Rings, and Magnetic Aluminum Scope Covers. I took the action out and installed it in the OD Green McREES Aluminum Chassis that accepts the AIC 10rnd. Mags. asking $2175 CASH, I might accept a partial, or Equal Trade plus CASH on your end if it's not Equal to the price I set it at. I'm interested in M1A's in 308, or 1911's(not interested in Kimbers) just Springfields, Wilson's, Les Baer's, possibly some older Colt 70series. Just about any Smith&Wesson Blued Pre Lock Revolvers, and 2011's in 9mm. RITTEN PRECISION doesn't build anymore Competition Rifles anymore, he just works on his own guns now. I traded a Baer 1911 for this one from another forum about 5yrs. ago. It only had 200rnds fired through it by the previous owner, he had a shoulder injury and just gave up the Rifke Competition just after having it built, I've only ran 150rnds down it before and after swapping the Stocks out. Please PM me any questions or trades, I live in the Whitehouse TN area, can meet in the Goodlettsville,Hendersonville, Gallatin, and Nashville TN areas. I can drive some to meet and make a deal but not clear across the state in either direction. If you need some more pictures please PM me your email address and I'll take whatever you need to see. Thanks for looking. There's close to $3600+ in this build.

He could have asked you to climb up your ladder and clean them yourself while he held it for you. Seriously I can't stand when you ask for a person to do some work for you, like you I've had to tell a few to hit the road, had a guy come out when we bought our house, my wife and I discussed having a brick mailbox and planter built so I sketched one up and even made a hand drawn 3d of what we were wanting to have built. I called six different contractors that did that kind of work, only two called and only one showed up. I showed him the sketch of what I had in mind and he said that's no problem at, he showed me a photo album of the ones he built and were he did the jobs at so I could call for references. Not bad, as we discussed and he measured where I wanted it built at he gave me an estimate, $1200 now that may seem expensive but for what I wanted and the time involved to level out an build it wasn't bad, so I thought. We were about to close the deal and settle on a deposit when he asked me where the bricks were at so he could see what he was going to work with. I politely explained that I figured that the $1200 he quoted me included them well he chuckled and said that would cost another $900 for him to purchase and haul them, I did my best to hold back but when he started laughing and told me the extra cost, well I lost it. Cops came and what a scene for the first week in the neighborhood. Oh well everything worked out, he left and the Cops and I got a good laugh out of the situation after he left.

That's not gonna happen, I've got a brand new set of screwdrivers for that task.

Weekend bump, price lowered to $525. Great Turkey Gun for someone, also have a box or two of 3" Federal Turkey Loads that I'll throw in. Thanks for looking.

Nice, well worth the wait. Now you've got to get out and run some rnds. down it.

I wish I had something on your list to trade, that one would go great with my 6"Bbl HWY PATROL. Good luck with the sale that's a good looking Smith&Wesson.

I could have swore I saw Elvis holding a sign just off one of the 65N exit ramps. I think it said "Help Colonel Parker Screwed Me Over."

That looks good, he should start selling those.

Another fine one gone, RIP Dusty. One things for sure when we all go, there should be some great concerts going on with all the musicians that have passed, hope they got beer to drink while enjoying some of the music that's there.

This one is SOLD!! Thanks TGO.

SPF, Got to meet up. Thanks TGO.

Back up for the start of the week. This is a great Turkey gun, lets get this sold. Thanks for looking

New week bump. Price lowered to $600. Lets get this one sold. Thanks for looking.

That's for sure.

Three hour drive just to get there and find out it was canceled, that sucks. To be honest it probably saved you a bunch of money, I've went to a few with a buddy and what they had was going way more than a new one would cost you. Now if they listed something you've been searching for and that was the only source then to me it would be worth it, but you'd still have to deal with the other bidders that want the same gun, I've seen some "ego" bidding happen and just sit back and laugh to myself and shake my head.

This one came in the other day. I ordered it about 6-7 month's ago. These are sopused to be one of the best OTF Knives out there. Gavin Hawk and his father have been making some great and sometimes unusual designs. They only make a limited number of each design. The way you have to order is either be a previous customer or you enter your email address and when the "drop" to order what they are making you have to be quick to get your name and build on the list, if you get lucky enough to get Inline he will send you a confirmation email with a link to pay your deposit then all you do is sit back and wait. Thes OTF's are supposed to be one of the few to be made without any blade play, and this one has none. It is their Mod. C TITANIUM OTF Double Edge DLC Coating on the Blade, tolerances are unbelievable check out YouTube and you can watch a few videos of how well they are put together. They aren't cheap either but to me it was worth the wait time and money.

Thanks for the compliments. I edited the thread so the pictures would show

Not sure, usually just order them online. I know that shipping may be high but you can find a deal or two, you may have to visit several sites but you may find a decent deal.

Lets drop it down to $675 or best reasonable offers by PM. Thanks for looking.

Back up for the weekend. Feel free to PM me a reasonable offer. Thanks for looking.

This why I stay away from these types of firearms. I'm not knocking you for having it, but the ATF "Rulings" are so misleading that it's not worth it to me. Just my thoughts on this subject. Good luck in getting it all figured out.