DJTC45

Here's some examples 1st BFR in 500 Linbaugh 2nd. Ruger Alaskan in 454 Casual 3rd. Smith&Wesson Bear Defense Kit in 500S&W.

Smith&Wesson 500, Ruger Alaskan, BFR's, 454 Casaul, you can find some decent deals on some used ones.

Here are two sets of Smith&Wessons Revolver Grips. 1st- N Frame Square Butt Factory Grips $85 Shipped. 2nd- Hertts K Frame Square Butt Walnut Grips $95 Shipped. Will do a package deal for both when bought together, just PM me. PAYMENTS ACCEPED ARE USPS MONEY ORDER PERSONAL CHECK(must clear before shipping) I also have a PayPal account if you want to use that method please PM me for information on that, Friends and Family with no comments. Thanks for looking.

Here's a pic with all the Staccato's I've got so far.

You got my prayers sir, I just had my 56th Chemo Treatment this past Monday. So I know what your going through, tell her to stay positive she can kick it. If you need to talk sometime just PM me. God Bless and take care.

Well I tore it all down the other day to get ready for some parts I ordered for it. I got the Holosun 508T, Wilson Combat Bullet Proof Single Side Thumb Saftey, and a Cheely Medium Flat Trigger that I had already. Everything went smoothly, few swipes of the file and the Trigger dropped in without a problem, then I did the same to the new Thumb Saftey and it went in without a problem. The Thumb Saftey clicks on and off with a snap but smoothly so off to the range the middle of next week and run some rnds. down it and the other three I have.

Nice 1911. GLWS.

I've owned both in the past, I couldn't tell if one was better than the other. I do know for some reason the GMC brought more in trade in value than the Chevrolet with amost the same package. Don't know why but that had been my experience with both.

The used market is high as far as Trucks go, especially if you have to get a 3/4 Ton for the long bed. I was looking at the possibility of trading my "VERB" 2007.5 Dodge Ram 2500 4x4 ST Diesel w/ Cummins 6.7, they wanted just as much as what I paid new for mine back in 2007 when I bought it with 26mi on it. Well the old "VERB" has 280,655mi on it now, put a new Transmission in at 185,000. One thing probably different about my Truck, all that emissions crap "fell off at 20,000mi". I've had the front end completely rebuilt over time, of course new shocks, and basic maintenance that any brand of vechile would require. I'm going to replace the water pump with an after market one even though the original is not leaking, I do need to replace the Oil Cooler and Gaskets, just developed a small leak but nothing major yet. I figured that spending a few bucks here to keep it going was better than paying today's prices even used and having a monthly payment. I drive it daily and wouldn't hesitate to jump in it and drive to California and back right now. I guess the best advice is do your research on what you want, used or new and set a budget as to what your willing to buy and if you can make a good deal for a cash price that would be the way I would go, but if you can afford the payments then put a healthy down-payment on one that will lower your monthly payments. Good luck on finding what you want to suit your needs.

The ones I found are $2000+, so I don't know how that compares to the Dan Wesson's in price guess it depends on the model of them.

What product are you going to use. Looking forward to seeing how it turns out.

Here's a Sinclair Bolt Maintenance Tool Kit for Rem. 700, also works on the following models- 700, 40X, 600, Mod.7, XP-100, XR-100, 722 does not work on the 770 or 40X RIMFIRES ACTIONS. $115 Cash FTF, or $120 Shipped Payments for shipping are USPS MONEY ORDER PERSONAL CHECK( must clear before shipping) I also have a PayPal account if you want to use that method of payment please no comments Friends and Family Message me for my PayPal account address. I live in the Whitehouse area but can meet in Goodlettsville, Hendersonville, Gallatin and Nashville area for a FTF meet any further it will need to be shipped. Thanks for looking.

Well these are known as a 2011, the two C's I have use a Single Stack Mag. and the C2 and this CS uses Double Stack Mags. These are in 9mm and I got into these a couple of years ago, I had five at one time but sold two of them, P 4.14 Full Rail the other one I sold was the P DPO 4.14. I carry my C's more they are a little more comfortable due to the size. These are soft fast shooting guns, are they worth $2000+ well you'd have to make that decision for your self If you ever shot one of the Staccato's you'd see what I'm saying about how they shoot. And there are other brands of the 2011 that are $4000+ are they worth it, probably to someone they are. Downfall to the 2011 Platform is the cost of Mags. $60+ and that turns some people away from the 2011 style guns. Where are you located at, I would be willing to bring them all to a range with ammo and let you run a few rnds. down them then you can tell me if they are worth it, I live in the Whitehouse area if you ever go to any of the indoor ranges around the Nashville area I gladly meet you. At one time I had 12+ 1911's, that included Wilson Combat CQBE's that were built to order, at least four Les Baer's, a couple of NightHawk's, Colts, and Springfield's, but I sold all but one Wilson Combat CQBE, were they worth the money did they shoot any better than a $499 1911, probably not it all depends on who's behind the trigger. But every one of those preformed like they should, and I never had a problem with any of them. I decided to get away from the 45acp due to my Cancer Diagnosis that I got two years ago, the 45 just hammered my hands to much due to the Neuropathy which is a side effect from the Chemo, the Staccato's in 9mm that I carry now and shoot don't beat my hands up like the 45acp did. Just let me know if you ever want to try one out we could make arrangements to meet at a range all you need to do is pay your range fee and I'll bring the rest. I'll get some pics of the other three Staccato's I have and post them here. Not sure I answered your question.

Just picked this up from my FFL, my new Staccato CS. Feels good in my hands, Trigger pull is good but I'm gonna change it out for a flat faced trigger. It's close in size of my two Staccato single stack C's, and the C2 I have. I've got a Holosun 508T coming in tomorrow so I'll mount it and get everything ready to head to the range and run it against the other 3.

Sure thing your next in line, I'll let you know.

Powder and Primers are SPF to Sunfish. Bullets and Brass are still available at the Separate Prices. Thanks TGO.

SPF TO TX999

Here's some Realoading components that I know longer need, it's time for me to start unloading something's I no longer have time for or don't use. 8lbs HP38 Powder New SPF, 2000 200grn. SWC Bullets New, 6000 CCI LG Pistol Primers SPF and 2500+ 45acp LP Brass(I'm not counting it out, if you buy and it's short just let me know and I'll make up the difference with the other 10,000+ pieces of brass I still have) Bullets and Brass combined Price $200 cash for both of them FTF(separate prices still stand). If I need to separate everything this is what the prices will be in Cash 1- 8lb HP38-$185 SPF- TO Sunfish 2- 200grn SWC-$185 3- Primers-$450 SPF- SPF To Sunfish I live in the Whitehouse area but can meet in Goodlettsville, Hendersonville,Gallatin and Nashville area, willing to drive a little, not 150mi one way. Thanks.

Here's a 1975-1976 Smith&Wesson CLARK CUSTOM PPC Target Conversion 38spl. This one was built by Mr. Clark, features 6" Full Heavy Slab Bbl., BO-Mar Rib, Bobed Hammer, Hertts Bill Jordan Grips, very smooth Double Action(feels like your shooting in single action). This one was built in Keithville Louisiana. $1150 (or fair offer) Cash FTF First to post I'LLTAKEIT followed by a PM gets it (NO TRADES) I live the Whitehouse area but can meet in the Goodlettsville, Hendersonville, Gallatin, Nashville area, but I can drive a little to meet and complete the transaction. If you need some more pictures or questions please PM me and I'll try to answer them or email you any pictures of what you'd like to see. Thanks for looking.

As long as it didn't have one of those forearm braces he should be ok. Maybe he needs to upgrade to the 2nd. pic.

I'd post a good deal unless it was something I wanted then you'd be out of luck.....

If you wanted to spend the money, OLD SOUTH RESTORATION in Dyersburg TN. they specialize in accurate Factory Re-Bluing of Colts, Smith&Wesson, Winchester's check them out even if you don't want to restore it. www.oldsouthrestoration.com

Well given the growth in Nashville and the surrounding areas it's not a big surprise to me when I got mine. TAXES and DEATH are a sure thing.

I've found a couple that I like, trying to figure out what one if the three I found forsale that I want. That one has seen some better days, but at least it functions properly and you don't have to worry about scratching that one.

That is one clean square body. I've been slowly replacing parts on my 2007.5 6.7 Dodge Ram 2500 4x4 Diesel, bought it new in 07 with 23mi on the od it now has 280,250mi on it. New Transmission at 186,000, front end totally done about six months just need to have the front bearings looked at, got a new water pump and oil cooler and belt that I'll try to install in a couple of weeks, just had the rear brakes and rotors replaced yesterday believe it or not the rears had about 180,000mi on them and just started squeaking last week, the Engine Exhaust Brake makes a difference. Now my AC Compressor took a crap the other day so I'll need to replace it soon, vechile prices are just crazy I looked at some at the end of 2022 and the same style of truck I have was $68,700 base price let alone the extras brought it up to $72,000+ and they had four used ones with 80,000-110,000mi on them and they still wanted more than I paid new for mine. Crazy I don't see how they are selling anything at these prices but I guess some just have to have the newest model, me I'll keep doing basic maintenance on mine till it just won't go any further then haul it to the scrap yard.