Caster

My wife bought me a boot leg box set a few years ago. It has every episode of Dr. Who from 1963 to 1989. I have watched several of the newer doctors but haven't gotten into them as much as the older ones. .....and yes, Tom Baker was the finest doctor to ever grace the Tardis.

Goodbye Hershel. Notice he smiled at the end. Alec Guiness made the same face before dying by Vaders hand.

Keep this guy away from the toaster!

Look into the K Hornet. It has slightly larger case capacity and is much more reloader friendly. Nice thing is, you can safely fire standard hornet from it. In fact, that's how you modify brass (fire forming).

Yup, yup! I have a large battery from a school bus neatly fitted into a large, heavy duty plastic, tool box. There's just enough room for it and my power management box that goes to my three solar panels. The cable is about 25' so' I keep the box inside my bug out can and I can set the panels up outside to charge. I've also found a neat little gimmick. It's a jumper cable that lets you boost a car from cigarette lighter to cigarette lighter. Kind of a joke for actually boosting engines but it allows me to charge the van battery from solar unit without any back feed into the system. The management box, powered by the battery will supply lights for the entire van, as well as some small personal fans, small device charging like batteries or cell phones, and a radio/cb. A DC power box is a must for any bug out camper set up. Generators are loud and consume too much fuel.

I read that. Doesn't mean I understand the reasoning behind it. If its got a groove diameter of 16 inches, then it'd be 16. I guess I'm just simple minded.

I'm confused about the nomenclature. What's a 16" gun a .50 caliber have in common?

The wife got me one today for $39.99. These are really cool. I've got a 18" barrel Ruger M77MkII .308 in mine. I really like it.

I quit the turkey years ago. Last night I had two New York strip steaks, a big slice of shepards pie, some yeast rolls and a sixer of Budweiser black crown.

Uhhoh......now what'd I do with that receipt.

L'Chayim!!!!!

Screw him and his family. If he wasn't a useless pile of ghetto ćrap, he wouldn't have got shot. If the family would have raised him to be something better than a steaming pile of ghetto ćrap, he wouldn't have got shot. "Ohh he was a good kid!" ....waawaawaa, piss on him and good enough for him.

Three "S's"     Shoot  Shovel Shut up   Put them down fast and humane, bury them and don't talk (or post) about it.  

I got one! It's sitting on the mantle, on top of my autographed copy of the Bible.

Are you gonna shoot it? I'd HAVE to shoot it. Priceless artifact or not it was built well and built to shoot. Awesome find.

If the guy in the video has a malfunction, would that be a 'toe jam'?

I wonder if his parents had any children that lived? We wonder why we tolerate this yet tomorrow, it'll be forgotten and back to the same old thing we go. Nothing changes because no one is willing to change it.

http://www.ralphbristol.com/player.asp?id=472 He wants to build a self supporting ammunition plant in Tn. The link above has an audio clip of his interview with talk radio host Ralph Bristol. This would be VERY awesome. Bring jobs and revenue as well as taking care of our needs in a worse case scenario. Man'o'man! How nice would it be to have brass, powder and primers made right here?

Under the theory of infinite universes, its possible that I exist somewhere in the multiverse as a rich, handsome, psychokinetic who can fly.........but I still wouldn't dance.

Got mine. Already got most of it boxed and ready to go! Do we have a target delivery date or do we send it whenever? Can't remember what I did last year. ....well, I can't remember what I did yesterday to honest.

You didn't mention ow much you wanted to spend. If money isn't a real issue, Hamilton Bowen is in east TN. There's not a soul on earth any better. Period.

Everyone I know swears the 35 is a 'bang ....flop' cartridge. I believe it. I have yet to hunt with mine but what a cast boolit from this thing will do in water jugs is extraordinary. I have several molds for it but my two current favorites are a 200g RCBS with a healthy meplat and a Lyman 200g round nose hollow point. The hollow point expansion is scary! I wouldn't feed this thing a jacketed bullet for nothing. There's no way they could perform ANY better. To beat all, recoil is very mild and the most confusing yet is point of aim versus point of impact. My 308 has a noticeable change from a 25 yard zero to a 100 yard shot. Granted my shooting skills suck and my Marlin only has a receiver sight but a 25 yard zero has no noticeable change at 100. The same hold that hits clay targets at 25 will bust every one of them at 100. That's with a 200g cast boolit running just shy of 2000 fps (no chrono, so I can only guess). The only thing that pisses me off about the 35 is that you can't make brass from 308 like you can with a 358 Winchester. ....and the fact that it took me all this many years to find the thing. Why I never tried it before I'll never know.

Because, despite their lack of aesthetic appeal, they work. They work when all other fail. All the older, classier, sexier designs need a trained skilled hand to get them to run like a Glock, and even then they will fail before the fugly plastic turd. A Glock is a framing hammer. We don't brag about or sit and admire a good framing hammer. We just use them and they don't fail. When I go to the range to have fun, I'll bring a Blackhawk. It's gorgeous and I love to look at her. When I get outta bed in the morning and tighten the belt around my britches, there's a Glock 19 on the right side. Later that day when I've been wallerin' on the ground and climbin around cars, I never give the Tupperware a thought. This is the definition of "Glock Perfection". It's the perfected TOOL and it works like no other.

The only reason you can see it is because its clean, this is a Glock after all. Stop cleaning it! Lol I took mine outta the holster the other night, I cleared the gun then proceeded to wipe out enough lint to weave a new shirt. I'm looking at mine right now and there's some tool marks in there where they ground out the casting flash. In a lot of injection molding Rees a problem area. A place where the geometry of the mold makes it difficult for the plastic to fill out or sometimes overflow if the mold isn't perfectly sealed. A has been said, no biggie.

http://www.yellowpages.com/nashville-tn/foreign-currency-exchange