Leaderboard

Just picked up one of these on a sale and wow I couldn’t be happier with the quality. Not something I will use very often but it’s solid as a rock. As with everything these days I feel quality goes down and price goes up. I felt like I got a real bargain on this at 129$ for something that feels so well put together. I waited a long time before buying one and I really wish I grabbed it sooner. If you are like me and have been on the fence I 100% vouch on this one. I don’t have the heaviest or lightest rifle deer rifle in the world (ruger American gen 2 6.5c) and this thing clamps down and i would really have to work knock it loose. Would be a nice way to mitigate some felt recoil for a young hunter too.

30 seconds

Staccatto trademarked the 2011. So they theoretically are the only 2011 makers, everyone else is a doublestack 1911. https://trademarks.justia.com/855/56/2011-85556563.html

Two tone Kimber 1911 in 45ACP $600 Chattanooga area Kimber Custom Target II has the following upgrades: Kart Match barrel Thick barrel bushing 20 LPI front strap Flat Trik Trigger Ed Brown magwell Also two 7-round mags with base pad update 12/23/2024 Took out a few guns that I'm trying to sell to Mountain Top Gun Range, north of chattanooga, to check the accuracy and function of the guns since I haven't used them in years. I did a 5 shot grouping at approx 15 yards with the guns and the best I could do offhand was about 1.14" for all 5 shots (3" diameter sticky targets), however I was able to keep 4 rounds down to about 0.82". The gun is capable of higher accuracy, the limiting factor is definitely me. Being in my 50's my vision is not what it used to be and my hold is a bit more shakier than I remember. bullets used for testing were 200gr lswc with 5.2 gr of W231 test results from 12/23/2024

I have a PS90 with a vortex red dot. 100-150 rounds have been fired through it. $1,400 OBO. Open to trades plus cash or straight trades of equal or greater value. Comes with a shell catcher.

Message/comment for more information or photos. FTF sale, must be TN resident, 21+ yo, ID, eligible of purchasing, and able to sign a bill of sale, For Sale or Trade: Marcolmar CETME-LC 2.23/5.56 12.5" to 16" P&W, Welded Top Rail, Marcolmar x RS Regulate Handguard (Includes original parts, STANAG magazine & manual) No longer available/in production, only 640 made. - $3,000>$2,700>$2,500>$2,200 https://www.marcolmarfirearms.com/shop/cetme/green-cetme-lc Zastava M70 Tiger Maple 16" 7.62x39, Zastava Side Rail, ALG AKT EL Trigger, VG6 Brake, Krebs Enhanced Yugo AK Safety (Original Magazine Included) - $1,500>$1,250>$1,150>$1,000 Zastava M92 Alpha 10" 7.62x39, Zastava Quad Rail & AFG, CNC Warrior Folding Brace, Zastava Night Brake, ALG AKT EL Trigger, Krebs Enhanced Yugo AK Safety, Echo93 Hogue AK Grip Plum (Original Furniture & Magazine Included) - $1,500>$1,250>$1,150>$1,000 Arsenal AF-M-47W AK47 7.62x39mm Waffle Circle 10 30rd Magazines (4) - $150>$120>$100 Zastava AK47 Polymer Magazines (6) - $100>$80>$70 Zastava AK47 Steel Serbian Magazines (LRBO) (3) - $75>$50>$40 Bulgarian AK-47 7.62x39mm 30-Round Steel Magazines (10) - $250>$200>$175 1k Rounds of BVA/Vympel 7.62x39 - $550>$500 In regard to trades, I am interested in: Colt Python 6" Marlin 1894SBL IWI Galil Ace Gen II 5.56, Tavor X-95 5.56 Beretta PX4, 92 Sig Sauer P210, P220 H&K USP 9T or 9C, Mk23, SP5 Eotech XPS2 or EXPS 2 10mm Handguns 2011

For Sale $3500.00 I purchased this rifle brand new and since then it has sat in my gun safe; I’ve never fired it. This is the version with a reciprocating charging handle, but with the savings that you’re getting you can simply buy the kit if you choose to upgrade to the non reciprocating charging handle. Includes all original packaging and documentation. The price is firm. I am already taking a pretty large loss putting it on the market considering everything I am including. No trades, I’m trying to trim down my collection. NOTE THAT THE OPTIC AND MOUNT ARE NOT INCLUDED, I WILL BE KEEPING THEM. Comes with the following items: 4 ten round magazines (valued at $50-$60 each depending on where you may find them), Surefire FH762SV-SCAR muzzle device, the factory muzzle device is included as well YHM Thread protector Sinclair Benchrest Forend Rail Adapter & Picatinny Rail Adapter Accu-shot Atlas BT65 CAL Bipod Accu-shot BT01-QK Standard height precision monopod Thanks for looking!!!! Feel free to contact me with any questions.

Hey all, My name is Dan. I am from the Chattanooga area. I am in the Marine Reserves now and just moved here from my last duty station in 2023. So not too familiar with the area and the different ranges available. I have a number of guns: pistols, shotguns, ARs, bolt action, and M1A. I really enjoy skeet/trap and 3-gun. Any recommendations for ranges, guns, accessories/gear, etc etc, is much appreciated.

I have for sale a Remington 870 12 gauge with a full tactical build. Good shooting. Owned for years and completed the build with my father. Original furniture included with sale. Below are the bolt on’s. Magpul Industries adjustable stock Adjustable sling 30mm red/green dot sight (has been removed) Mesa Tactical carrier/rail/heat shield Mag extender - holds 7+1 shells Green LED flashlight HFD2 T Breacher Metal foregrip Soft case not included Located in Knoxville Price: $600 *Must be a TN resident and legally allowed to own a firearm.

I bought this one new earlier this summer with plans on adding a scope and shooting the heck out of it but that never happened. It's still unfired and now ready for a new owner. I bought it at my local shop but included a screenshot below from KYGUNCO to show details if you want to research this particular model more. Feel free to PM with any questions. $550

Kriss Vector SDP Gen 2 Call of Duty in real life. Super fun and unique. Super fun to shoot and I have had zero failures. Approximately 200 rounds through her. 10mm Kriss Vector. Includes Kriss OEM handguard ($89 on their website), Kriss angled foregrip and Kriss extended mag. Willing to include CNC Warrior 3-piece booster if you want but you will need a thread adapter for it to fit. *Brace not included Threads are cross threaded so you will need a tap and die or a gunsmith to fix. Shoots great without a muzzle device but it will need to be fixed if you want to add one. Caliber 10MM Model Vector SDP Action Semi-Automatic Operating System Closed Bolt, Delayed Blowback Barrel Length 5.5 In Overall Length 16.75 in/ 425mm Magazine(s) included (1) 33 Rounds Color Black Weight 6.0 lb / 2.7 kg Barrel Material 4140 Chrome Moly Barrel Finish Black Nitride (QPQ) Twist Rate 1:10″ RH Trigger Type 2-Stage, Quick Reset Trigger *Buyer must be a TN resident and legally allowed to own a firearm *Buyer must be willing to sign TN Bill of Sale

Beautiful rifle. Has approximately 200 rounds through it to get through Zastava’s recommended break in period for the adjustable gas system. Includes Zastava side scope mount. I can text better pics upon request. Description 5.56x45mm/.223 Caliber Semi automatic gas operated system with Adjustable Gas Block Double stack bolt 1.5mm bulged trunnion receiver Cold hammer forged chrome lined barrel 30 round polymer detachable magazine Bolt hold open notch on safety selector Adjustable front & rear iron sights 8.5 Lbs 39″ overall length 37″ 18.25″ barrel length Serbian Red Wood Stock Set *Buyer must be a TN resident and legally allowed to own a firearm *Buyer must be willing to sign TN Bill of Sale

Ad closed

New model blackhawk convertible in 45 acp and 45 lc in good shape 4.62" barrel has reduced hammer spring about 2.5# trigger Chattanooga area

Sold

Sold elsewhere.

Finished the small deck I built for my wife last week and had some material left over. I had 2 outdoor tables I built out of treated pine 15 years ago. I got them up on the patio and took my high-pressure washer and cleaned the dirt and funk off them, then decided to rebuild them. The tops were 1 x 4 treated pine that had become pretty rough. If one was not careful you could get a splinter while using them. I took the old tops off and started my rebuild. My wife wanted one of them to use as a potting table. Both tables were 3' x3' in size. I took some 2x4 and widened one to 4' x 3'. I had some Trek flooring left so I used it to put a new top on her table. It turned out pretty good and she liked it. When the weather warms, in the spring, I am going to seal the old and new wood with Thompsons Water Seal and help prolong the table's lives. It cleaned up well and I had to replace some of the structure because a couple pieces had split and rotted. The other table was on my shooting range, and I have been using it out there for several years. It was in a little worse shape, but I decided to rebuild it also. As I tore the top off, I decided I wanted to widen it, and also put a rifle shooting side on it and make it multi use. I am right-handed so I extended the same side back an extra 18" and cut one of the side pieces of trek on a slant, starting at 6" going to 0" over the 18" length to allow me to get closer to the extended area when my Led Sled was sitting on the top of the table. I finished the last table today. I took my Sled and one of my rifles out today and the thing worked great. I can scoot right up to the sled and access the sights without being in a strain whatsoever. Actually, it is perfect when using the rifle and rest. I am totally surprised how well both tables had held up over the years. They have set on bare ground for their lifetimes. I only had to cut about 1" off the 4 legs, due to rot, which is great considering their life span was 15 years and they have never been sealed, not one time. I plan to take better care of them in the near future. The cost was minimal, and they should last until I don't need them any longer. Sometimes, one just hits a home run guys!

I’ll take it pm inbound

Good evening. Up for sale tonight is a Smith and Wesson M&P chambered in 45acp. This beautiful pistol has seen very little use or action and is looking to find a new home where it will be loved, cared for, and fed a regular diet of 230 grain FMJ. This pistol has only 100-200 rounds through it and a simple physical exam will reveal very little if any wear. At this time of year it’s important to take care of those less fortunate than yourself. For a small, one time fee of $400 this little pistol (full size of course) can come to your home and know love, affection and the hands of a marksman who can hit bullseyes. What do you say? Are you willing to feed a poor little M&P this holiday season? If you do, I will include a black leather Galco holster. My gift to you as a thank you for helping these poor guns get the love, attention and full metal diet they so richly deserve. But wait, act quickly and you can get a crimson trace laser grip on the gun as well. A $200 value, yours free. Make a difference in a pistol today.

That was my thinking. I have a bench for when I sight in my rifles but this will be nice when I just need to quickly check with a shot or 2 before I hunt after I travel. This saves me from having to bring the whole other setup which is more of a day of shooting type thing and takes up a ton more room in my truck in comparison.

Agreed. Personal preference is key. I myself find red does everything I need it to.

Nossir, but it's got enough meat to thread at ½x28

So I pretty much live my life shooting off a trypod. I've used tripods that run 2k+. While I don't use a bog pod or the $2K trypod, the bog pod will do 90% of everything that needs to be done from a trypod. If you've never used a trypod, it's amazing. My trypod is probably around $800ish for a small fraction of extra functionality. You'll be happy once you get used to it.

You know you want it

There is some mechanical differences between double stacked and 2011s and they were calling them that back when they were still sti but I hear what you’re saying

Bought 1 for my glock 19 but was looking for a better host gun. Actually just ordered a Tisas Night Stalker 9mm from PSA. Seemed like a heck of a deal for $499. https://palmettostatearmory.com/tisas-usa-1911-night-stalker-sf-9mm-5-8rd-pistol-platinum-gray.html

I appreciate the opportunity but I have a few AK’s and am actually already picking up another that’s listed here, tomorrow afternoon.

I'm interested. Can you PM me?

SOLD Benchmade Dagger Trainer Knife Set 176BK-COMBO w/ Black Sheath It is new and never been used, or carried. It is 7 1/4 inches long and weighs approximately 2.1 ounces. The blade material is 440C Stainless Steel with Black DLC coating. The skeletonized handles are 440C Stainless Steel with spine jimping and a finger ring. This knife combo comes with a Injection Molded Plastic Sheath and Lanyard. I am in Wilson County Lebanon area.

Up for sale is a Glock 20 in 10mm with Adjustable Truglo night sights. Slight wear on Hood of barrel, otherwise wonderful condition. Unsure of round count, I have personally put around 200 rounds through it. Comes with box, 3 15 round magazines, 15 220gr Federal HST hollowpoints and 45 rounds of 170gr PMC bronze hollowpoints and any other 10mm ammo I find laying around. It shoots extremely well with the 170gr PMC Bronze hollowpoints. Sold Pending meet Located in Nashville, TN

SIG XTen, 2 15-round mags & 950 rounds of S&B 180 grain ball ammo. I'd prefer to sell it as a package. Bought a little over a year ago and I've only taken it out a few times. Shoots awesome but I'm just not gonna use it much. $950 I'm in Manchester but travel thru Murfreesboro & Nashville regularly so I'm able to meet anywhere along that route by 24. Thanks, fellas

My EDC, doesn't she look cool? got it from our EL Presidente

Great guns solid trigger, good accuracy, and no failures to fire with any ammo used. They have a rebate currently.

Ended up with this on a trade deal, and thinking about moving it on. This serial numbers as S 1111xx, and from what research I've done, that would be a 1954, first year Highway Patrolman. It has some honest holster wear, and at some point has been ported, appears to be a Magnaport job but I don't know for sure. Grips are nice later Magnas, but are not the orginal diamond stocks. I haven't shot this one, lock up is good and tight and it has an excellent trigger like most old Smiths. Asking $950 in Knoxville, Oak Ridge, Lenoir City area. Trade interest would run towards a .44 mag or a nice pump or semi auto 12 gauge shotgun. I prefer wood stocks but I'm open to most stuff. Just let me know

Both Saints and Both M&ps are Sold. Saint victor ar10/308. Rifle only. Around 300 rounds through it. 750 Saint victor ar15/5.56. Rifle only. About 500 rounds through it. 750 Zastava ak 7.62. Rifle only. About 200 rounds. 750 SW m&p shield plus 1-13 mag 1-10 mag with box 300 Sw m&p 10mm m2.0 2 mags. With box 450 Private bill of sale will be required. Unfortunately I am not looking for any trades at this time. As anyone who has done business with me before knows I barely fire the ones I sell. I buy them. Try them a couple of times and sell them. If i left anything out or you have any other questions please ask.

1911 Rock Island 45ACP Custom upgrades for sale Chattanooga Fun gun to shoot has the following Work: Kart barrel Trigger job ~4 lbs 25 LPI front strap Ed Brown magwell Tungsten Guide rod ADE green dot, not the best sight but the foot print is the same as vortex, burris fast fire, etc Thick barrel bushing Also comes with qty 2 7-round mags and pistol case 12/23/2024 This is great gun and accurate, took it out to Mountain Top Gun Range and after shooting it I decided to keep it, it is that fun to shoot.

Custom Zastava M70 with full hand guard. Very hard to find this setup in stock. Retails for over $1500. Included ALG trigger, Zastava rail mount and KGB grip. I haven’t seen a KGB grip in stock for over a year. No trades, cash, gold or silver only. I can send better pictures upon request. Zastava Arms ZPAP M70 7.62 x 39mm AK47 Semi Auto Rifle - Blue/Black, 16.5" Barrel, 30+1 Rounds, Synthetic, Magpul Stock *Must be a TN resident and legally allowed to own a firearm. Must be willing to fill out a bill of sale.

Up for sale is a 16" Colt M4 Carbine (LE6920) chambered in 5.55 with lots of upgrades. How much? $1,200 or best offer. What is the round count? 500 (ish) Any blemishes? Standard wear and tear. A few nicks around the trigger guard from the punch The receiver was rattle canned coyote tan at one time, but stripped back to the original black later. There may be some small specs of paint in a few corners, etc. Everything else is new and wasn't painted. What's in the box? 16" Colt M4 Carbine LE Prefix (6920) 1 30-round Magpul Gen 2 Pmag What parts are original and what is upgraded? Original: Colt LE6920 Lower Receiver Colt Upper Receiver BCG Buffer and Spring Colt 16" 1/7 twist barrel Upgraded: Magpul MOE Carbine Stock Primary Weapon Systems Enhanced Buffer Tube with Ratchet Lock Castle-nut and Endplate Breek Arms WARHAMMER Mod2 Ambi Charging Handle Strike Industries Extended Pivot & Takedown Pin Set Dirty Bird Ambidextrous safety selector Bravo Company BCM GUNFIGHTER Grip Mod 3 RISE Armament Rave 140 3.5 lb. Drop-In Trigger (Flat) Magpul MOE enhanced trigger guard (polymer) Magpul Industries Enhanced Ejection Port Cover STNGR VYPR M-LOK Free Float Handguard (15 Inch) Aero Precision Gas Tube Aero Precision Adjustable Gas Block - .625 Low Profile Bravo Company Vertical Grip Mod 3 Yankee Hill Machine Mini QD Flash Hider - 1/2x28* * if you don't have a Yankee Hill Suppressor, I can swap this for the original birdcage flash hider that came with the rifle. Why sell such a great Rifle? Honestly, I really don't want to sell this, especially after Colt discontinued the LE models. But, according to my wife, I have "too many guns". While I don't think you can ever have too many, I am running out of space in the two guns safes, and all my other rifles are SBRs that have been Form 1'd (so selling them is much more complicated). I'm sure I'll kick myself in 10 years looking back at this. Looking for any trades? Not currently, just cash. What are your terms for sale? Face-to-face sales only - facilitated in the Mount Juliet, TN police department headquarters parking lot designation for person-to-person exchanges. This cuts down on scams and counterfeit cash deals. Must have valid TN Carry Permit. Must be legally allowed to purchase a firearm. Cash only. Email with any questions.

Brand new never fired. M4e1 enhanced 5.56 with the Mlok hand guard. It has the sba3 brace and a radian raptor charging handle. Never fired.

This is the bottom line right here. Safety is paramount. Legal or not, if you endanger others, you're wrong. 20 years or so ago I was at a group shoot up in Missouri. We were on one guy's private property and using a large hill as a backstop. One of the neighbors came over and complained that bullets were flying over his property and were dangerously close to his house. Frankly, we thought he was full of it and just wanted to be a PITA. That hill was huge, no way it didn't stop every round. But, just to be sure, one of our guys went over and took a look. 10 minutes later he came running back yelling "Cease Fire!" The bullets were ricocheting off that rocky hill and were indeed landing on this man's property near his house. There was never the slightest doubt among any of us. We immediately stopped shooting and never used that area as a range again. Safety has always got to be the first consideration.

Nobody really knows who's full of s$%t in this case. Either one or both could be the problem.

Everything they said about Kore is true. This is the way to go

Looking for a Springfield 4.5” only Xdm in 10mm. Willing to entertain trade with boot on your end. Let me know what your thinking. Glock 19, Zev slide, Agency magwell, Ghost connector, SilencerCo barrel, Trijicon type 2 RmR, two 15rd mags, one 17rd, Custom Kydex holster for gun and mags, suppressor height sights. 1000$ for gun w/o optic, 1400$ with. Barrel or optic have never seen a shot fired.

Springfield trp 5 inch 10 mm pretty much stock except a Wilson combat flat spring system two extra magazines factory night sights are very bright still and all factory equipment $1500 OBO Call or text Randy 615-425-6178