Leaderboard

* PRICE DROP* Pre- 2013 (Fully Adjustable Trigger) SAKO TRG 22. Factory 20" Barrel and Dead Air Key-Mo Muzzle Brake. It will come with the factory Sako TRG muzzle brake and 1 Magazine. This rifle is a tack driver (no surprise). I have owned it for 2 years and have put no more than 40 rounds through it. The Vortex scope is available with the rifle just PM me.

Well we had our home study visit tonight it went well. It was not nearly as invasive as I was expecting. She still wanted to see inside the safe but we set very clear boundaries upfront in that she was not going to come into our home and have free run. My wife is a teacher so she gets to see a lot of foster kids which seems odd for being in a middle to upper class area. We came to find out that the initial home study writer was not comfortable in rural areas. I have had professional interactions with our case worker in the past, so we know each other and have a good rapport. She is a good person and is one of the few that cares about the kids.

I picked this up at the FFL yesterday, it came with the Wooden Presentation Case(no box) according to my S&W Catalog it was made between 1978-1979. It's in pretty decent condition for 40yrs+. Here's some pictures.

Fantastic 4Runner 4x4. It has 235k miles, one owner for most of its life, and always TN owned. Lexpro in Franklin did all the maintenance for years. Needs nothing. I have a HUGE itemized list of all the maintenance items. Maintained with an open checkbook. Some cosmetic dings here and there, and the roof clear coat is peeling, but nothing out of the norm for an ‘08. Clean title and Carfax. $8000 obo

Comes with Sig Romeo red dot and suppressor height front sight (rear sight integrated into the sight). Comes in a Wilson Compact grip module, but will include factory grip as well.

Up for sale is an Israeli contract CZ75 compact. These variants are unique in that they are the only known production of alloy frames with a safety. The commercial peer would be the CZ 75 PCR which has the alloy frame but configured with a decocker. Being an import pistol I've baselined it to - Sights have been replaced with Dawson Precision sights (Tritium front and black rear) - new springs from Cajun Gunworks - Came with two 10 round mags and I've added a 15 round mecgar (OEM). - Replaced plastic grips with current production rubber grips (original included). - Also included is a JM Custom Kydex IWB holster ($80) Excellent little shooter and great addition to the CZ collector. $550 for the package, Middle TN area.

Sold

Sig-Sauer P226 9mm, stamped "Made in W. Germany. The chin stamp indicates it was built in Kiel in 1993 (date code KD). I purchased this from the original owner in 2013. I have shot approximately 200 rounds. The condition appears to be very good but I have to admit to being a novice on handgun "condition." I welcome any questions and can provide more detailed photos if needed. I replaced the original sights with LPA adjustable sights but still have the originals (the rear sight was painted green over the original white). It has always been stored in a hard case and well cared for, cleaned after every range visit. Includes the pistol, original box, instruction manual, test target, one 18 round magazine, Safariland duty holster, original and installed LPA sights. Pick-up preferred but shipping can be arranged. I am asking $925

It's more likely a 20A circuit. 15A is only supposed to be for lighting. If you only print on one printer at a time, you should be fine. 80% rules says 20 amps x 120V x .8 = 1920w is safe peak.

Magazine disconnect disables firing without magazine in place Loaded chamber indicator (hole above breach for visible confirmation) No 12 round mag included in OEM bundle Manual safety If anyone doesn't care for these things, I or any other competent gunsmith familiar with the P365 can disable/defeat/remove any of these features except for the LCI hole, which would have to be welded (more trouble than it's worth; better to buy an aftermarket slide instead).

1. SOLD!! TNBuck2 Made from an old farrier's rasp it is 12 1/4" long with a blade of 6 1/2". The bolsters are made from 1084 carbon steel and the handle is made from nice figured walnut. Brass pins and lanyard tube. Comes with sheath shown including dangler. Dangler is easy on easy off. $130 shipped. 2. SOLD!! TNHeavyGunner Damascus made from 1095 and 1020 1/8" thick. It's 9 1/2" long with a blade of 4 1/2". This knife has a smaller diameter handle made from antler and a multi colored wood with brass finger guard and pommel cap. If you have large hands this is probably not for you. I myself have no problem with the grip. Medium of even small hands are perfect for this. $120 shipped. 3. 440C SS 7 3/4" long with blade of 3 1/2". Bolster is 440C as well. Handle is ash and pins are G10. Comes with sheath shown. $100 shipped.

On the .357 the Lee crimp works fine, especially on SWC and hardened lead TC. Just my .02

I use, and am very happy with, the Lee Factory Crimp die.

They sure hammered that message home.

Well that happened… that was a wild 48 hours as everything flew out the door, but floors are clear for the wife & now I guess I’ll buy more high end crap to go in the garages. we’re men, that what we do- we buy crap LOL

Mossberg 12 gauge with door breacher . $350 Benelli Super Nova tactical with 4 shell sidesaddle. $450 Can meet in Franklin or Erin

This rifle fornicates.

Sounds like one inconvenience after another. Thanks for the update. Glad to hear that you seem to be getting around better.

@willis68 Is the blade length on these knives 3"?

Polymer80, manufacturer of arguably the most prolific 80% kit in the world, was forced to shut its doors two weeks ago. Employees were laid off abruptly, the website was taken down, and the doors are shuttered. I am friends with the owner, Loran Kelley, He said that Everytown USA was filing an average of two new lawsuits every month against his company, and with the backing of big anti-2A money, the litigation costs drowned him before he ever even managed to defend himself. A recent settlement with the city of Baltimore was for 1.2M, and that pales in comparison to overall legal defense fees. It was literally cheaper to settle that one lawsuit than carry on the fight, and dozens more fights remained. Note that this is DESPITE the fact that recent court rulings went against the ATF's extra-legislative redefinition of 80%'s as firearms, and also the recent Supreme Court Chevron Doctrine ruling strips the ATF (and other agencies) of this kind of latitude in the future, which would have bolstered Polymer80's defense. It's sad that we live in a nation where special interest money can destroy a legitimate company, supposedly protected by the Bill of Rights, simply by drowning it in litigation. Without recourse, without hope.

nailed it

Il Duce, I carry a comprehensive line of AK parts on hand, and I can order even from many of the niche manufacturers. I'm north of town, on Harrison Bay. I have about 15 varieties of AK grips in my AK Grip Box. Welcome, FoxJordan. Great to have you in the community! We share a love of the AK platform - I came from California, where they told us to "embrace Communism," so this was my response...

Do not be shy, jump on in the water is great!