Leaderboard

Stainless 4” 629 smith , low round count. I just don’t use it. $850 Murfreesboro area.

Me too. Especially not as long as Wayne LaPierre is there.

I am a lifetime member but they will not see another dime from me until some major changes are made from the top down. There are too many other great organizations that need support.

Rare two tone, NJ State Police issue HK P7 M13 9mm with 3 Magazines. Excellent comdition, less than 200rds through it. Have all original parts to include the box, manual (two) in both German and English, cleaning rod and scraper, and original sights which are not installed on gun. Currently the XS big dot sights (orange) are on the gun. Will trade for Scar 17S NRCH 16inch with KDG extended rail and geissele trigger or will accept $4,500. The trade is obviously the better deal and preferred as that is what I am looking for.

Remember it ain't just LaPierre. The board of directors is packed with his hand picked cronies. What we need is a clean sweep. But it ain't likely to happen as long as this bunch runs things.

BRAND NEW Beretta 1301 Tactical 8+1, 7 shots through it, selling because its not my thing - $1600 OBO XCR-L 7.62x39 Excellent condition works like a sewing machine - selling because I want to change things up $1200 Pickup in W. Knoxville

The 1873 and later 1892 were designed to fire handgun length cartridges. The 1894 was designed for rifle cartridges. The 73 was originally offered in .44-40. Where as the 94 was originally offered in .30-30. However, today Winchester does offer the Model 94 in .357, .44 Magnum and .45 Colt. Most lever fans consider the Model 92 better for these rounds as it cycles smoother and is a bit smaller and lighter. BTW: Safeties on these rifles is a fairly recent addition. Most lever lovers consider them an abomination.

GOA, SAF, FPC and several other 2A organizations have already laid all the ground work. With the recent ruling on un-finished receivers, there's a good chance that this time the pistol brace rule will finally and forever be nullified. NRA is finally jumping in for the sole purpose of claiming the win even though they did almost nothing. Don't give them a holes too much credit.

Withdrawing Sale

sold

Sold-Leave everyone at the range green with envy! I have never fired this pistol. New in the box. I bought it at a charity auction…… by accident The GS Performance Custom G43X 9mm - Green Envy Edition Includes: OD Green Frame / Ulterra Camo Slide Holosun 507K mounted Flat Face Gen2 Pyramid Trigger set at 4lbs Heavy Tungsten Guide Rod Extended Slide Stop Extended Slide Lock Extended Magazine Release +4 Double Diamond Magazine extension and one regular magazine. This set up sells new at the Glock Store for $1;499 plus tax. ***SOLD*** Sorry, No trades.

Deleted

Kahr P380 - Matte Blackened Stainless Slide with 1 - 6 round and 1 - 7 round magazine (w/extended grip). I am not the original owner. There is some finish wear from being carried. Other than that, the gun is in very good shape. No box or manual. $350 cash (as of 07/07/2023) $375 cash $400 trade value I live between Franklin and Bellevue (Middle Tennessee) Buyer shows TN Drivers License and signs a bill-of-sale. Buyer must be legal to own a firearm. Established TGO Members preferred. Potential trades include: Ruger New Model Single-Six Open to other trades

Gorgeous firearm. GLWS.

Honda Inverter EU2200 This is a great little generator I purchased to run my CPAP and sensitive electronics (Cable Modem, Wi-Fi Router, PC's, etc.). We installed a whole home generator and no longer have a need for this one. I purchased it new at Home Depot February 2021. With sales tax, it cost $1,255. I was unable to find a lower price anywhere. They do not seem to ever go on sale. If you are unfamiliar with these Honda products, they are wonderful. Almost a work of art. Easy to operate and very, very quiet. I only ran this one on the Eco Throttle Switch setting to power low demand items. I never ran it on anything demanding. I have another generator for refrigerators, etc. $XXXCash Let me know if you have any questions.

nice

I can't say as I have ever seen one of these in stainless. Nice! Good luck.

Nor will you find any rational explanations then. There is no justification for shooting schoolchildren, and reading the incoherent ramblings of the perpetrator isn't going to shed any light on the situation ...

Savage 338 Lapua, excellent condition with rail and bipod. $950 maryville area meet

Different mechanics internally. But based on what you are doing a 73 can be better than a 94.

Sorry. I"m in Cleveland. If I do sell it it will be a FTF deal as it would be too expensive to ship and I avoid Nashville like the plague with the hellish traffic.

True. I remember what happened the last time. https://www.reuters.com/world/us/nra-board-directors-re-elects-wayne-lapierre-executive-vice-president-2022-05-30/ and the time before that https://apnews.com/article/d5d90ab1596f478c8f20d4dbe3f73979 Im not sure how any real change can be effected as long as the current crew is running things. I get my ballots from them, but theyre geared towards the people they want it seems.

I believe state law says that, yes. But that's the point, what the law says isn't worth much until it gets argued over in court and decided on by a judge. Laws are one thing, legal precedent providing interpretation of that law is something different. It's far more complex and gray than it should be.

Where your Tullahoma,Tn is his says Franklin,Tn. ‘Guess it never hurts to ask in case they moved ? Mike

If you were closer to Nashville, Id try to help figure it out. GLWS1

Good, but I was paying their bills when they weren't doing anything, so I feel like I've already given them money. No sense in signing back up.

Stihl MS391. Used to cut down a few trees and then put up. $550 OBO.

I believe that is a pocket hammerless you have they are a completely different animal but still cool.

Another gun I just do not shoot anymore. This is a very nice, accurate MK III. The Volquartsen Pistol Competition kit was installed by the original owner. All of the original parts are included. This is what Voquartsen says about the kit: This kit includes our Accurizing Kit , Bolt Tune-Up Kit and CNC-Machined Disconnector. The Pistol Competition Kit is designed to produce a crisp, clean 2.25 trigger pull, eliminate stovepipes, and eliminate failures to fire! Comes with original parts, case and 2 magazines (not shown in pics). $650

The sheath on the right was requested by a gentleman a while back for an Esee 5. He wanted the scales dyed as well. While he was waiting he sent word that he had given his grandson the same knife and wanted one built for him too. Then he saw a picture of a holster I had made for a friend of mine with initials on it, so he asked if I could put his grandson’s initials on it. I said sure, I’ll do that. A little later he asked if I could do an arrow with fletching and a flint-knapped broadhead. I said well I’m not sure but I’m a-gonna try it. (Plum skeered at that point) So the sheath on the left is the one built for his grandson. The picture below is the grandson’s sheath in the raw with a little bit of design on the belt loop. I’m not the artistic type so it took me a while to do all that. There’s still some things I don’t like about it and I’d very much love to be able to improve on not only adding designs, but everything I’m doing. I hope he likes them.

I have a TLR-7 Sub on my 365L. I carry it appendix IWB with no noticeable printing or width difference over the bare gun.

Coming from a Covenant School parent, this is an accurate assessment.

It’s correct Hale chose the school due to a perceived lack of security and the isolated nature of being on the hill. She had considered two other schools as well as a public location but determined she would have more success at TCS. This is written in her notes which I will address in a sec. While there was not an SRO at the school, measures were already being put in place to have trained and armed staff on site along with the active shooter training they had recently completed. There was not a “Manifesto” as one might think. That was a poor choice of words for the police chief to use. There were 17 notebooks filled with research of every school shooting, logistics of the TCS building, camera locations, employee info, etc. Hale had been monitoring the building for two yrs and compiling info. She was hyper focused on this aspect thus the large amount of data on covenant and on how to successfully conduct a school shooting with maximum deaths. According to police, this was the most planned school attack in US history and they're still processing info. It’s an active investigation that they expect will take another year to complete. It’s true the police don’t want this research and info out there since it will most definitely aid future shootings. As far as the school, church & parents not wanting the “manifesto” released, there are unwell people out there wishing harm towards the school as evidenced by continued letters and calls to the school. It’s unfathomable but the rumors people have created, pushed, and subsequent anger has made an unsafe environment for everyone there. My wife has fielded calls and received letters several times. People have traveled to Nashville to stalk the school. Releasing the notebooks would be equivalent to police releasing schematics and security details of your personal home knowing someone activity wants to hurt your family. Protection of staff and children who are still experiencing trauma from seeing their classmates killed is paramount.

Thank you for posting about this. We are in fact located just south of Murfreesboro on the county line. We currently have a manufacturing facility but are not set up with a store front in Murfreesboro yet. We are also veteran and family owned and operated. We currently manufacture 9mm 115gr with both New and Reman brass. We make all our of ammunition on a CAMDEX and all of our brass is roll sized, then pressure checked and processed on a CAMDEX also. We just did our first gun show this last weekend 6/24 & 6/25 at the Mid-TN Expo in Murfreesboro and it was a huge success. We are currently looking for a few more stores in Murfreesboro to stock our 9mm ammo. With the volume we are selling online it has been very difficult to keep up with demand. A lot of companies raise their prices when demand is too high, but not us! This business was started because we didn't like seeing ammo price gouging and wanted to be a part of the solution. We look forward to hearing more from you and always feel free to check out our instagram to see some cool behind the scenes stuff. https://www.instagram.com/borobullets/ Jason Boro Bullets jason@borobullets.com

Let’s see… Since my last post I picked up 1967 Marlin 336RC in 30-30 1969 Marlin 336RC in .35 Remington 1980 Marlin 375 in .375 Winchester (thanks Kahrman) and I am still waiting on the 1976 Marlin 1894 in 44mag. I’m not considering it “mine” until I hold it (61 days and counting)

Wife just canned the first round of our green beans. She loves to hear those little lids pop! Thank goodness it doesn’t take a lot to make her happy.