Leaderboard

This another one of my lever guns that I never shoot. Browning B-92 in .357 magnum. I do have the original box with this one. It is in fantastic shape and is a gorgeous little lever gun. $1800

It depends. Most people think the law is black and white. In reality it's shades of gray and green.

Up for sale is a rifle I never shoot. It is a Browning 71 in 348 Winchester. Of course this is Brownings version of the Winchester 71. These were only made for 2 years, ‘86-‘87. Factory ammo is very expensive but luckily I have a bunch of ammo to go with the rifle. I think I still have the box for the rifle but I am not positive. I have 120 rounds of factory ammo. 40 rounds are new manufacture and 60 rounds are vintage manufacture. Most vintage ammo sells for $140 per box or higher. I also have 220 rounds of reloads. I am selling the reloads as components. So if you reload it gives you a lot of brass and bullets to use. $2500 for everything.

I have a 1965 Colt .357 python revolver with the 6" barrel in blue steel for sale. To my knowledge, this gun has never been fired. The only obvious alterations from original is where my grandad stamped his name on the butt of the grips which are aftermarket smooth grips. Since the same year make and model of this pistol is selling on gunbroker.com for around $3,500, I'm asking $2,750. I'm in Chattanooga, TN.

Here is another rifle that I never shoot. A Marlin 1894 Cowboy in 45 Colt with the octagon barrel. I do not have the box. I am the second owner. It has been shot some but not by me. Appears to have been used very little. $1500

Also remember, for those of us living in TN, SBRs and SBSs are no longer illegal according to the state. Unless you live in one of the liberal cities you don’t have any real concern about local, or state law enforcement enforcing the federal aspect….unless you are doing something else wrong. Similar to CA and CO in regards to drugs, and several states in regards to illegal immigration.

"Free" SBR registration means they don't care about the money and they don't want them to be illegal, so they must just want us to register them so they know who owns all the guns. That scares me way worse than the penalty for not registering.

I sold my 2017 F150 King Ranch Crew Cab and no longer need the safe I installed in the back under the seat. Super heavy duty full length safe will hold several long guns, multiple handguns, or other valuables. Quick access combo lock. Securely bolts to the frame via existing truck bolts. Easy 10" install. Like new. Few external scratches from my garage floor. It's about 75lbs and heavy steel. Pickup in Brentwood or Smithville area. Here is a link to the manufacturer for specifics. https://www.lockerdown.com/i-50-model-ld3025-2009-2022-f150-and-2017-2022-super-duty-f250-f350-f450-crew-cab-under-seat-long-gun-safe.html?ref=category:12 4

New Taurus 605 357 magnum 3 inch barrel stainless steel with night sight. Hogue grip and small grip included. Never fired. Model #60539NS. NO TRADES. $375 in Clarksville/Pleasant View area.

Bought this vintage beauty yesterday. Always wanted to own one. Been sitting around listening to the four clicks: C - O - L -T

Whenever I am asked for such information when paying cash the answer is a simple and authoritative NO or “you don’t need that”. It’s that simple.

These are great shooters. If I didn't have one I'd been bringing this home.

They hold like a vise and I have five hidden around my house and one in each of my trucks.

Looking to offload my Ruger LCP. Includes one magazine, around 40 rounds of ammo, and a carry clip installed. Great little carry gun. Priced for a quick sale at $200, pickup around Spring Hill. Will want to see a drivers license or CCW.

Lots of places seem to want to collect info about you today. Just pay cash and make up a name and phone number.

I've used my magnets for years and never had an issue with a gun becoming magnetized.

I guess the best bet to determine if it's technically in place is to follow the money. It appears to me Palmetto State and others are still selling brace equiped pistols...so there's that.

Sent extra donations to the Second Amendment Foundation as well this week. They are extremely active with numerous lawsuits making their way through the system.

Summary Upgrade of forum software for January 2023 Explanation PS Community Suite 4.7.6 Released 01/10/2023 This is our January maintenance release. During the holiday period, our focus is on providing bug fixes and improving stability. Feature updates will resume in February. Release Notes - Invision Community

I'm hoping House Republicans see this over reach and cut their funding till they come to heel.

New ATF spokesperson

I absolutley love this knife it is becoming my favorite automatic Knife my new Autonomy

I don't post much about knives here. I suppose it is a shame because overall I really enjoy knives just as much as I do firearms. Thus, I decided to post about my favorite knife of all time and my current EDC. Spyderco Yojimbo 2. It features of a wharncliffe blade profile and a Spyderco compression lock. I'll be honest, for years I discounted many of the Spyderco knives because I thought that the "compression lock" was the same as a linear lock. I couldn't be more wrong! Two things happened. I realized that no folding knife can take the place of a fixed blade. In other words, any/all locks will fail under the right circumstances. I watched this video. This, along with other research, gave me enough confidence that the compression locks are quite a bit better than linear locks. You can read more about different lock types offered by Spyderco here. I'm sorry, I just have a prejudice against linear locks. No offense implied to anyone that likes them. I present to thee...the Yojimbo 2! I'm not exaggerating when I state that it is my favorite knife ever. I just feels perfect in the hand and in the pocket. Just decided to post some pictures of it today since it has been on my mind. Spyderco showed off a "Yojumbo" a few days ago. I'm lusting.

As a Christmas present to myself,I recently acquired a Sears and Roebuck Ted Williams Model 100 (thanks @chance77. This is a Winchester Model 94, made by Winchester for Sears. It is chambered in .30-30 and is a post ‘63 Model 94 from either the late 60s or early 70s. There are not great records of the serial numbers from these rifles, from what I can tell. The rifle came with a Weaver side plate for a Weaver side mounted scope on the left side of the receiver. Since it was already there, I went ahead and picked up the correct Weaver 1” scope mount and a vintage Armsport 3x9x34mm scope with a Duplex reticle. The side mounted scope is interesting. If I was a righty, I think it would be awkward to use. But being a lefty, it is fairly easy to just press my cheek up and into the stock move my left eye to the scope from the iron sights. I’m looking forward to getting it to my buddies range and sighting in the scope.

They support the second amendment but not the fourth. Sounds like the owner or employees need a civic lesson. Stand them up. Then tell them to pound sand on the purchase.

I'm sure a fellow denizen will correct anything wrong here, but this is how I understand it. A trust is setup by an attorney and you transfer the property (firearms in this case) into the trust. The trust now owns them, not you. You name yourself as a trustee so you maintain the ability to sell them as you please. The main advantage is that you can name multiple trustees or "responsible persons". Any of those people can can possess (and sell) the item legally without you needing to be present. You all essentially have co-ownership. One reason to do this is to help prevent being charged in an edge-case in the law around who actually has possession of an item. Let's say you buy an NFA item in your name and put it in your safe. Let's also say your wife has the combination to your safe. She technically has possession of it the same as you and since her name isn't on the registration form, she's violating the NFA any time she's at home and you're not. It's not something I think anyone has ever been charged with, but by the letter of the law it's a problem. A trust solves that by making both of you legally able to possess the item. Every responsible person listed must submit fingerprints. Before some time in 2016, trusts didn't have to submit fingerprints and this was a major reason to use them. They also didn't require CLEO sign-off on every purchase. Individuals did. Today the CLEO requirement is gone entirely and since all responsible persons in a trust need to get fingerprinted, trusts are less useful than they used to be. Depending on your circumstances, a trust can make estate planning easier or harder. Remember that you don't own anything in the trust. The trust owns the items. The trust has trustees and it has beneficiaries. Beneficiaries don't have to submit fingerprints, but they can't take ownership of the items until all the trustees die. Then the transfer to the beneficiaries happens outside your will since the items aren't your property. This may be a pro or a con, depending on your personal finances, the value of the items in the trust, your will's beneficiaries, any co-trustees and the beneficiaries of the trust. Say you name your brother as a trustee because ya'll go shooting a lot and then there's no question about if he can have the NFA item or not. You die and he survives you. You might leave everything you have in this world to your spouse (or kids, whatever) but your brother gets sole control over everything in the trust because YOU don't own anything in the trust and neither does he. But he now controls the trust and everything in it. Maybe that's what you want. Maybe not. But it's a factor to consider when establishing a trust and naming the trustees.

A beautiful blue pony.

Don't worry about the external appearance. You've got a nice pistol that should give years of service. Get a couple of extra mags. I see them between $15-20 each on sale from various vendors in surplus firearms. Don't take it apart further than field stripping for cleaning. If you do it may become a 'bag-gun.' Enjoy it.

Continued images.

Well, your $190 gun is going for about twice that these days. I picked up mine today. Not as pretty as yours, but I'm OK with it. Feels like it fits my hand VERY well. Here's the promised pics. (First time loading pics on this site, so brace yourself for the usual site noob chaos...)

Ah ok. I was wondering because typically duct is 4" or so. Unless you want to go cheap with a small hand saw id hit harbor freight and buy the clearance model i linked up top. Everything is looking great

Sounds like a good excuse to buy a new tool

No. It's just the pistol.

took a while

I assembled this myself from parts. Ready to slap a yote or poke holes in paper. Ballistic Advantage 18" SPR Barrel Midwest Industries mlok handgaurd muzzle break Magpul Bipod 20MOA 30mm Scope Mount Rifle length Magpul MOE buttstock Magpul Grip Rise Armaments Trigger Upper and lower both are Anderson. 1x 20 round Magpul mag. Scope is not included. 423-240-zerothree4seven $600

The company's that sell the magnets say it can't happen. Or the ones i looked at. That's a huge problem for me. Gun metal is somehow magically different than all other metal

To me, even if the pistol gets magnetized it's temporary, and if small metallic particles are attracted, it's minimal at the worst and would be cleared by cleaning and compressed air as far as I'm concerned. Until testing reveals otherwise, having the ability to hide firearms securely in hidden spots, the benefits outweigh the minuses.

Aw man...that just ain't right.

Very, very nice! I have a J.C. Higgins 12 ga. pump that is actually a High Standard that I had the gunsmith cut the barrel down for a home defense shotgun. Nice to know there is another "lefty" on TGO!

I generally don’t recommend magnetizing your firearm. It can (does not mean will) attract debris into vital parts and cause stoppages. This is a reason that some people check for magnetism and demagnetize firearms during assembly. Also, magnets aren’t a holster.

Lots of new pistols recently. Being a longtime RIA fan; I am, like MacGyver, very much interested in seeing and shooting one. Not outrageously priced, but at hovering around 1K, it will not be a likely addition anytime soon for me. Also like the fact that it's made in the continental USA and not an import; but that's not a buying issue for most of us. I see the Canik Rival S being a competitor for this RIA. Sounds like booth are going to be very popular with range and competition shooters. Simply because I'm so vested in the Canik line, I would probably go for the Rival S first. But if money were no object...The RIA 5.0 would go into the number one position for me. Either would be an awesome addition to any shooter's safe though.

Yes. They are usual in a rubber or thick plastidip type case.

There's a 90% chance I could run that vent without doing any damage, assuming there is no obstruction such as blocking or other ductwork in that framing channel. Otherwise I'd have to cut a couple of holes in the ceiling. Cut to patch, IOWs cut clean and square, make it easy on yourself. But then, this is what I do for a living. Yes, vent to the exterior.

Look at mr fancy over here offering a X570 board.