Leaderboard

$1000 OBO In/near Chattanooga. Very low-mileage 686-2. Trades? 10mm pistols, AKs, good semiautomatic 12 gauge "tactical", 9mm PCCs, lever guns, other stuff that grabs me. Multi-gun trades ok and I can trade up or down.

With EcoBoost engine you can get a 4,000 lb towing package. The hybrid is rated to tow 2,000 lbs. My little EcoBoost is rated at 250 HP. It will really take off. It's not as nice as a new F150 but it only costs half as much.

Congrats on the new truck and impending retirement. Your old Tacoma is still running like a song.

It has loads of room inside. Four people are very comfortable in it. Only thing I have noticed is the engine seems a little loud. I guess a $22,000 truck does not have a lot of sound insulation. I bought the plain XL model because it was so much cheaper. When you get into the XLT and Lariat models they have all the bells and whistles of the large trucks. Even the XL model has remote start from you phone. Check your tire pressure and fuel gauge from your phone. My EcoBoost has been getting between 29 and 30 miles per gallon.

I guess I'll be driving my '97 fBIG50 until they quit making parts for them. 350k on the clock & I'm starting to baby it a little more (76 on the interstate instead of 79. Officer)

In past threads on this subject I've already spoken about the problems my two sons both had when they needed new vehicles. It sucked for both of them. For several years now I've been considering trading off my 2nd vehicle, a 2004 Mercury Grand Marquis, for something smaller and cheap on gas to use as an everyday driver. Thereby saving wear and tear on my pick-up and the cost of gas. But every time I start checking into it, I would end up getting royally screwed. That's just how the market is right now.

Some 9mm 1911s have extended ejectors installed that will be too long to allow ejection of a loaded .38 Super round. From what I have experienced, you can often get by with just one shortened .38 ejector for both 9 and .38. Like someone suggested above, make sure the .38 case head will slide up the breechface. Chances are you may need to also purchase a new extractor and adjust it for .38 as well, since an extractor that will put sufficient tension on a .38 case will not put enough tension on a 9mm case for reliable extraction. You'll need to figure out what ramp style the Garrison uses for the barrel. Generally Springfield uses Wilson/Nowlin style ramped barrels but it's always a good idea to check your personal gun.

It's a double edged sword. I'm with you that this is the right kind of work...going after actual criminal activity in firearms procurement. But the examples will be used to try and close the "private seller" exemption/loophole.

Author of one of my all time favorite books, Unintended Consequences. This is a sad day for those of us in the gun culture. https://www.facebook.com/100002421818050/posts/5018748048215873/?d=n

I have two of these so I am selling one to fund another project. This is an early 5.7 with everything it came with. Fired shell from the factory, cleaning kit, lock etc. It comes with 3 mags. Not really looking for any trades but might do a partial trade for some 500 S&W ammo. $1100 $999.99 + .01

In October last year I ordered a 2022 Toyota Tacoma. I recieved the Tacoma in December 2 months later. It's my "retirerment" truck since I am pretty close to retiring from my primary job. I wanted a simple reliable truck and this was the last true simple truck left on the market and I'll tell you why : It's a 4 door truck with real frame rails and body , the engine will stay on until I turn the key off. It doesnt turn on and off at stop lights like those other truck. It has a regular gasoline engine that breathes on it's own and doesnt have a stupid turbo charger that will fail later. All cylinders run and it doesn't have that crazy system that shuts off some cylinders to save fuel. All that extra junk like turbo chargers , stopping and starting the engine at red lights , and cylinder shut downs will eventually wear out and wear the engine out. My 2022 Tacoma was $29,600. Also there was no "market adjustment" either like lots of other dealers are doing. I paid the factory sticker price that I listed and that was all. No added bull crap no added charges at all. I know a few years ago you would talk dealers down from the sticker but no more. Trucks and cars are in high demand and dealers are adding these " market adjustment" stickers on them. The dealer I went to was one of the very few dealers that dont add that mess . I'm pleased. The only thing I dont like is the new 6 speed automatic transmission. It likes to shift a lot and it doesnt have a dipstick. I like the old 4 speed automatic better but those are long gone. I meant no offense to any truck owners with the fancy bells and whistles , I just prefer a simple truck with no fancy things on it.

Such a shame. The man was an icon for the 2nd Amendment. Every gun owner should read "Unintended Consequences". Great book. The story is intermixed with actual significant moments in 2A history and helps explain how we got to where we are now.

Reduced

I have since added a Henry Lever Action (thanks Hipower) and a Ruger 10-22 (thanks Croakerhouck )

I've owned both the G20 and G29, and as far as I was concerned the only difference in the two is my 3XL hands didn't like the G29, so I gave it to my son. I reload and shoot some pretty hot loads through both without any spring replacement. I did install Ghost trigger systems in both for just a better trigger.

Harris Combative Strategies RED DOT PISTOL SKILLS Oliver Springs TN April 30 - May 1 2022 https://www.eventbrite.com/e/red-dot-pistol-skills-tickets-315535113017 The Red Dot equipped pistol is becoming more common in the holsters of law enforcement, military and private citizens and this class is designed to quickly develop confidence and proficiency with the platform. Unlike iron sighted pistols Red Dot equipped pistols have a few quirks and idiosyncrasies that need to be accounted for and trained for. The most high tech weapon is worthless without solid skills to operate it to the full potential. This class will help you develop those skills. Some topics include: Grip, Draw, Finding the Dot Faster, Acceptable vs perfect sight picture, Target Focus vs Sight Focus, Trigger control, Tracking the dot in recoil, Target transitions, Shooting on the move, Malfunctions (both with pistol and the optic) , Alternative indexing methods and much more. Required Equipment: Reliable Red Dot Pistol and at least 3 magazines, carry gear, Eye and Ear Protection. We have a few loaners if you do not have a Red Dot pistol and want to attend the class. Ammo Count is 600 Rounds. For safety reasons holster must fit the belt you use and must not collapse when the gun is removed. Holster must cover trigger guard. Serpa Holsters strongly discouraged unless that is your issued duty rig . A rain coat/wet weather gear is also a good idea in case of rain. Instructor: Randy Harris Instructor Bio Price: $400 (discount price has been extended) THERE WILL BE A SPECIAL EARLY BIRD DISCOUNTED RATE OF $400 (+tax and the Eventbrite processing Fee) THROUGH APRIL 1 . AFTER THAT (Apr 2 - Apr 29 ) IT WILL BE $450 (+tax and the Eventbrite processing Fee). PARTICIPANTS CAN ALSO CONTACT RANDY (randy@harriscombative.com) TO PAY BY CHECK OR CASH OR CREDIT CARD DIRECTLY TO AVOID THE EVENTBRITE FEES AND TAX. Location: Windrock Shooting Range & Training Center ( https://windrockshootingrange.com/ ) 720 Windrock Road, Oliver Springs, TN, 37840 CLASS TIMES : Saturday April 30 (8:30AM-4:30PM ) Sunday May 1 (8:30AM - 4:30PM) Weather Policy: If weather is such that it jeopardizes the students' safety, the class will be postponed or delayed as appropriate as determined by the instructor. Otherwise, the class will continue as scheduled rain or shine. Randy Harris is a highly-accomplished civilian firearms trainer with over 20 years experience in the field . He holds instructor certifications from Rangemaster, Suarez International, the National Rifle Association, and the State of Tennessee. He has participated in the National Tactical Invitational and is a multi-time presenter at the Rangemaster Tactical Conference. Randy is an IDPA Master Class shooter in six divisions, placing in the top 20 in the Stock Service Pistol Division at the 2015 IDPA World Championship, and he is one of only four people to hold both the Red Pin from the Rogers Shooting School (with an Advanced Ranking while shooting from concealment) and a Turbo Pin from Gabe White's Pistol Shooting Solutions class, and is the only person so far to earn the Turbo Pin using a strong side IWB holster.

You would win brother.

I've never been happier to move or mow/trim around the yard of vehicles I have as well as keep them insured despite only driving most of them "when needed". And to think I had an older Duramax listed for sale and couldn't give it away around March of 2020. Pfff, damn thing is worth gold right now lol. Good luck to anyone in the hunt right now as prices are as swollen AF.

One of my clients who is pretty in the know and owns more than a dozen dealerships says that they are preparing for war footing when it comes to the chip shortage (and carryon supply chain issues) through at least the end of 2023. When I last spoke to them, they only had 56 new vehicles across the entirety of their lots. On a different note - we bought my wife a Kia Telluride - because we need a third row that’s actually usable by someone who’s older than 3. I can’t say enough good things about it. She drove a Land Cruiser and a Sequoia and it beat both of them out by a lot. The Land Cruiser cost almost twice as much.

Good luck in your search. I’m currently driving a 2013 Ram Laramie 4x4 with only 87,000 miles on it. Collierville CDR hounds me weekly trying to buy it for just under $30k. I won’t be selling. The new trucks are nice, but not nice enough to pay current prices. Hell, it may take me another five years to hit 90k miles unless I take some short trips out of town. I wouldn’t want to be in the market for any large purchases at the moment. @Erik88my wife thinks she’s going to get a 460 so I can chauffeur her around while she works, but she’s sadly mistaken. Or maybe I am.

I would look at a used Lexus GX470 or GX460. The 460's are newer and a little bigger. The 470 has the legendary 4.7L V8 which has been documented to go 1 million miles a few times now. https://www.facebook.com/marketplace/item/1054011635214955/?ref=search&referral_code=marketplace_search&referral_story_type=post https://www.facebook.com/marketplace/item/469057814965331/?ref=search&referral_code=marketplace_search&referral_story_type=post

Weather permitting, I’m riding a Harley Davidson now. 50MPG and much more fun than a truck.

Welcome aboard!

I'm keeping my 20 year old truck and my 10 year old RAV4. Absolutely nothing wrong with either one. I wouldn't be afraid to buy a high mileage Toyota truck. Even if you have to shell out a few grand for repairs it's still cheaper than buying new. Plenty of Tundras for sale on Facebook marketplace.

Two of the last three trucks we've bought came from the classifieds here on TGO. The third one came from a bank repo auction. Screw a dealer! Have some patience and watch Facebook marketplace, Craigslist, and LSN.

I’m holding out for the Cyber Truck.

You’re absolutely right. Prices are the craziest I’ve ever seen. I’d love to go back to a Toyota, but I’m driving my 2005 Chevy Z71 until it goes down, and when it does I’ll go buy a new.......engine and transmission, and another Harley. And STILL have less hurt feelings than trying to buy a new truck.

Welcome

Welcome and enjoyed your post. Best of luck in your new career adventure, sounds exciting. It’s always a pleasure working doing what you enjoy.

Welcome and welcome back to the enjoyment of shooting. Having a Makarov shoved in your hand is a great way to catch the bug. You’ll have to post a pic of the 1891 Argentine if you can sometime . Those are beautiful rifles and many of us would like to see it.

I always advise folks to get in when they can, and not try to time things. If nothing else, it's just simpler and really doesn't show much difference over long periods (like decades worth). But that chart is really great for reminding us there isn't much that's new, just shades of repeating themes. Think of how bad it looked in each of those years, and what would have happened for someone who panicked.

I can't afford a $50,000 new truck so I bought a new Ford Maverick truck for $22,100. It's got a pretty small bed on it but I hauled a 10 ft stepladder home in it yesterday.

1911 Mais Motor Truck with Canon

Sold

Been on the lookout for one of these so when I ran across a nice one at an out of the way gun shop For $200 I jumped on it.

Just relocated to Chattanooga myself in January, and as far as I've been able to tell, every place that runs pistol classes has plenty of instructors already -- at least I can't find any that are interested in me. Dead Zero Shooting Park has a 1,000-yard range and 100 yards for zeroing. I believe they have occasional night shoots also. For 270-degree bays you will probably need to go to Fort Bragg or Camp Lejeune -- I don't think there are any in TN. Different clubs and ranges have their own rules and RSOs to enforce them, so you may need to look around and find some whose policies you like. Have fun, Whisper

That movie is underrated. That guy was as relaxed as pretty much everybody needs to be for at least a little while in their life.

Caveat - I am not a 1911 wizard, but I haven't had much luck with 1911 'drop-in'. Like DJTC45 suggested, a Kart pro fitted barrel is my preference, though I also have Bar-sto & Nowlin and I even got lucky with a few Colt factory take-offs. I definitely suggest a good 1911 gunsmith fit the barrel / bushing and adjust extractor if required, unless you have that skill.

Your better off having one fit, you may have to adjust the extractor a little bit but it's very doable. I would get a Kart Bbl. Kit and you'll probably want to get a new Bbl. Bushing to match your new Bbl. Should be pretty straight forward but make sure the gunsmith you take it to for the work isknowledgeable on the 1911. Look up Kart Bbl.'s they have a drop in kit I believe, but I'd rather have one of there gunsmith fitted Bbl's. Wilson Combat, and NightHawk have Bbl.'s also you can check out, also Barsto.

Thought this was an interesting chart. Might want to wait a few more months of down before jumping back in if the chart can be believed.

1. I've had this piece of 3/16" thick 1084 carbon steel knocking around the shop for years hence the roughness. I finally came up with a shape I thought I could use it. OAL is 12 1/4" and cutting edge around 6 3/4". It has a false edge. The handle is made from antiqued hickory with manzanita and G10 accents, liners. Comes with combo kydex/leather sheath shown. $140 shipped. Payment preferred with a check/MO. 2. 3/16" thick 1084 carbon steel the OAL is 12" with a cutting edge of 7". Handle is G10 and African Blackwood with manzanita accent and G10 liners. Pins and lanyard tube are brass. Thumb jimping on the spine and a false edge. Comes with combo kydex/leather sheath shown. $140 shipped. Payment preferred with a check/MO. Thanks for lookin'!

I'm sure we all feel similar about the ATF, but if they are catching people like this then it sounds like the type of work we want them to be doing. Seems like a legitimate use of their resources. Having that type of criminal activity at the gun shows only makes things worse for the rest of us.

After putting out a WTB request I was contacted by "andy Gillis" aka Bigarc sent a private message offering to sell me a vp40 tactical. After contact He would only sell through cash app. After research the same phone number was tied to this previous reply to another person's wtb post. I declined, but beware. Phone number is same as previous scammer. Google it. If ots not bigarc someone is using his account.

Ready for a bike ride in Chicago.

Thanks for breaking it down. I've been reading your write ups and appreciate the sharing of experience. Ah man, now I want a S&W 3913! That's a cool piece. I started warming up more to some of the double action stuff lately. A good, metal, DA/SA is becoming more of an acquired taste in the sea of budget striker fired plastic (which I love too).

OK I'll play. I'm a firm believer in always having a gun on me, so that usually means something small and light and unobtrusive. A small 9 , snubby 38 or a 380. Any of those on me is better that a 45 left at home. Over the years, Smith 37 nickel- Colt Mustang Pocketlite 380- Keltec 380- Kahr P380- Kahr PM9. I just bought a P365 but havent shot it enough yet to carry it.

Sheesh...... It took me 5 minutes to freaking see it! Background color is important.

Dudes..... like for srsly..... O. M. G!!! It took me maybe 45 minutes to put together, figure out the primer timing rod thingy & set up the dies, then another 2 hours to crank out 500 rounds, without rushing & checking every 20th powder charge. How have I managed so long without this in my life???

I have a few... The very best of which is a Winchester 94 in .30-30 made in 1974. Simply because it was my dad's rifle, and it's a very good rifle. Got some post '64 freckles and such, but it's for the most part in awesome shape and IMO the lines of the 94 just make it a beautiful gun. Let me see if I can dredge up some pics here. Here's the '94 This is an 1892 takedown with the octagon barrel dating around 1922 - in .44-40 of course. Here we have what I feel is the best purchase dollar for dollar one could make in the firearms game. A Henry Golden Boy in .22LR Here's one I picked up at the Appalachian Fairgrounds about a month ago. Winchester 9422 Legacy in .22 magnum. Pretty sure it's unfired. And finally we have what I consider to be my Tennessee deer rifle - unsuccessful as of yet. But anyway, a Henry Big Boy in .44 magnum. This is a wonderful gun! But.... the title of the thread, favorite lever gun. My dad's '94 of course.

Here my Rossi m92 I mentioned earlier, that my dad engaged the reciever. I did replace the wood with Precision Gun Works wood. It's my kids favorite shooting gun, not to mention mine! It's as great as a tactical/shtf gun as it is a great wall hanger.