Leaderboard
Popular Content
Showing content with the highest reputation on 12/12/2020 in all areas
-
I met Charley Pride once as a kid in a Golden Corral in Anniston, Alabama. I was over there with my grandfather, and he was there having lunch. No one seemed to bother him - and truthfully I don’t know that anyone noticed him. But on my way out we passed his table and I said, “hello, Mr. Pride.” He smiled and proceeded to have a lengthy conversation with a kid who probably wasn’t more than 10 or 11. He wasn’t too far from the height of his fame, but he wasn’t too big or important to take the time to talk to a kid. He’s had a fan in me ever since.4 points
-
Vonnegut wrote "Harrison Bergeron" in 1961. For those who've not read it it concerns mandating equality of outcome by restricting those with talent. I see shades of it today.4 points
-
I wasn't even aware of the "buy build shoot" kits until I read this thread. I was aware of the 80% lower kits and even did a little research on their legality. Everything I read said that it's totally legal to buy one of those 80% lowers, which the BATF did not classify as a firearm, and complete it oneself. And no serial number is required, even if it's sold later. (Though it would have to be serialized if sold through a dealer in order to complete the paperwork.) Having looked now at the BBS kits, and trying to be objective about it, I can understand Magiccarpet's position that those shouldn't be available. I don't agree with that position, though. If it's perfectly legal for me to machine my own handgun from a chunk of billet aluminum, why shouldn't it be just as legal for me to do a little finish machining on an item that's mostly complete? In other words, why should it be that only a skilled machinist should be able to take advantage of being able to build a firearm at home? There's nothing that makes a skilled machinist any more trustworthy than a guy like me, who has minimal machining skills. So as I see it, it either should be legal to build your own firearm or not. And even though I understand Magiccarpet's position, the problem with agreeing to "sensible" restrictions on guns is that as soon as that new restriction is in place it becomes the new standard. And the anti-gun folks begin working on the next "sensible" restriction. The anti-gunners will NEVER be satisfied so long as Americans are free to own anything beyond a basic bolt-action hunting rifle or a pump shotgun. And perhaps not then. So any concession on the part of gun-owners is only advancing the anti-gunner position. A right once lost is very difficult to regain.4 points
-
BATF is just the label they run under. I blame SEVERE gvt overreach since 9/11 and even before then if you want to dig deeper. I'm convinced they approve/sign off on some of these "devices" long enough for people to fill their homes with them then deem them illegal just so they already have something to charge you with should they ever need to come raid your azz. No different than when vaping was a safe alternative to smoking now vaping is the new problem lol. GD idiots4 points
-
To Sig's credit, they had my upper on the way back to me within 2 days of receiving it. They didn't send me a new BCG but they did install a new firing pin with a spring. Hopefully this one lasts a bit longer.4 points
-
Nah, 55yo, 69", 230lbs, survived 3 parachute mishaps, one broken plate, a couple UXO, and a few near misses. I've learned from an early age that I was mortal, but besides hiding in a basement for the rest of my life (It would get me there too), there's very little I can do to prevent my demise. Don't get me wrong, I'm not stupid, like going around licking toilet lids, I do take basic precautions, but just don't believe those in power have my best interests in mind. When those that place these restrictions in place start to follow their own guidelines, then, maybe, I'll begin to listen.3 points
-
Bradbury covered the technique beautifully in Fahrenheit 451. Are we at War with EastAsia? Who cares, time for the 2 minutes hate everyone! What scares me (not to segue), but if your eyes are open and you were exposed to this literature in HS, it is literally happening before your eyes. We were warned. Exactly as laid out in Huxleys works, too.3 points
-
Sure, machinists aren't the average Joe, however. Knowledge and access to specialized machinery is required. You, me, or anyone with a credit card can purchase 3D printers and materials retail, download files for free off the internet, and POOF, parts. I concur that prison time acts as a deterrent to some folks, but not all. The point I was trying to make is knocking off Polymer80 corp. isn't going to keep unregistered firearms from peoples use. The technology to do so is ubiquitous today. Can't regulate it out of existence.3 points
-
Do not repair the box unless it is just falling apart. If the gun is as flawless as you say then keep the box the way it is. It will matter to a Colt collector. They would much rather have an unmolested torn box than a taped up one. Nice commander!3 points
-
3 points
-
And that's a good thing, a consequence of nominating and confirming conservative justices. One of the hallmarks of conservatism in jurisprudence is a reluctance to intervene in states' internal matters, as well as a strict interpretation of constitutional law. The SCOTUS upheld these ideals in rejecting the Texas case and their refusal to allow one state to dictate to others how to run their elections. The Trump administration (well, along with Mitch McConnell who has probably been more instrumental in shaping the federal judiciary to be honest) has put an indelible conservative stamp on both the SCOTUS and the remainder of the Federal court system, actions which will do more to benefit the country than any of Trump's other endeavors. However one of the consequences of seating more conservative judges is to lessen the influence that politics and politicians have on the judiciary. This is a good thing, even if it causes Trump to have a hissy fit over this one case rejection ...2 points
-
OK, fess up. Which one of you NE Tenn folks did this ? A Secret Santa walked into a Bristol, Tennessee, Walmart on Monday and donated $64,995.51 to cover the cost of layaway items. https://www.breitbart.com/local/2020/12/12/secret-santa-pays-off-65000-in-layaway-items-at-tennessee-walmart/2 points
-
2 points
-
There's no scenario where the electoral college fails to elect Biden. The rest is moot ...2 points
-
2 points
-
Some do, and I have heard many of my Japanese friends make comments about it. I spent several years stationed in Hawaii. My wife taught school while we were there and we had some close friends of Japanese decent. The truth was the attack was built around bad intelligence and fear. The whole “If there had not been a Pearl Harbor, then there wouldn’t have been a Hiroshima and Nagasaki.” Is well understood and accepted amongst the Japanese. Military strategist believe the Japanese provoking the US to join when it did was probably one of the best things that could have happened to end the war. Many more lives would have been lost around the world if the US had not intervened and dropped the MOAB. I can not describe what it’s like being on Oahu each December 7th. It just feels eerie. It’s almost as if the sea, the plants, the animals, and every person knows December 7th on Oahu is a sobering day. The sun just rises slowly on that day each year.2 points
-
Exactly! While I take precautions it doesn’t mean I think shutting everything down is okay. No one (most of the media) is talking about the kids that don’t know where their next meal is coming from, or the suicides, or the homicides, or the domestic violence, robberies, burglaries. We won’t get those numbers until the lockdowns are over…. and I suspect they will be staggering. Will anyone take responsibility? Of course not, Trump will be gone and they will blame it all on him. These azzhats that are shutting things down, destroying private business and hurting the economy will be judged harshly. Of course it won’t matter to them. If you want to go out to a restaurant; you should be able to go. Kids should be in school. Stores should be open.2 points
-
The correct answer it to take both of them or if they contain powder, break them apart and sort into lines.2 points
-
Again thanks for all the prayers and well wishes. I went into surgery at 10am and was home by 6pm. My after surgery PT went really smooth and after the gourmet hospital lunch and PT session I was processed and out of there. I know the nerve block is doing it’s job well and I keep waiting on the pain to kick in, but so far not much at all. I can flex my knee back to about 70 degrees and straighten it back out and I’m walking around the house every 2 hours and doing the sliding exercises as prescribed. I’m sliding the walker around, but I’m able to walk fairly normal and place all of my 265 lbs on it with no trouble. Of course I may be in the fetal position crying profusely (haha) when the nerve block ends in 24 to 48 hours they say. As of now the only thing I feel is a kind of soreness like the day after a good workout in the gym. I’m also keeping ice on the bottom and top while sitting down. Thanks for all the encouragement and PT advice!! Randall532 points
-
I think if I were in your shoes I'd contact the buyer, explain the problem, and apologize for the inconvenience. You've made a good-faith attempt to follow through, and if the buyer is a reasonable person he'll understand the situation.2 points
-
When I first got up it was real tough, but now I’ve been walking and doing pt each time I take the meds, well, about 30 minutes after my pain meds and it’s bearable now. I’ve got 4 ice packs in rotation.2 points
-
I’m doing the PT they gave me to do until Monday when I go to Benchmark PT and start on the real stuff. They told me to take pain meds about 30 minutes before i get there. It’s sure harder to walk around today, but I’m doing it. I appreciate the encouragement.2 points
-
Eurasia and EastAsia as well as two minutes hate are all concepts from Orwell's 1984. Fahrenheit 451 is where they burn the books because they are offensive.2 points
-
I'd call that my last resort, keep running chkdsk/r to see if it can get through the issue. When it's running, it's trying to repair any issues it may have. It also marks the bad sectors so they won't be used again, sometimes it looks to be "stuck", but it's still working. If you have an indicator light, it blinks when the hard drive is being accessed, as long as it keeps blinking, even if it's just now and then, let it keep running. The good news is, more than likely the HD is ok, just a software issue. Dell puts a hidden partition on the hard drive to recover the pc, which Dell will happily charge you for if you send it to them. Here are a couple of links which may get you through a complete factory restore. You WILL lose any personal data on it though, so use it only if there's nothing you need on your HD. https://www.addictivetips.com/windows-tips/access-recovery-boot-partition-windows-10/ https://www.minitool.com/backup-tips/factory-reset-command-prompt-021.html2 points
-
If you're so worried, get a temp job at an old folks home, they'll hook you right up. The way I look at is is this; We were born with an expiration date, and if you believe in destiny, then a manner of death too, so why waste time worrying about it.2 points
-
I can't get my head around some of the valuations. I mean, I get IPO frenzy, made a few bucks that way myself over the years. But you've got startups that haven't even posted a profit yet valued higher than whole industries! I get that Air BnB is a disruptor in the hospitality industry, but across the market, corporate valuations are at such high multiples to earnings its very risky. My retirement money I trade very conservatively. Fun money not so much.2 points
-
I've looked at it from the opposite direction for years now. Yesterday's legal is today's illegal and poof ! you're a felon2 points
-
I've been positioned conservatively for a while (missed a lot), but my dividend stocks have been doing very well last few weeks. Agree, seeing distribution here, as always at the top..... The IPO market lately is beyond bonkers. Another sign that tells me not to adjust my positions.2 points
-
How long is this mask debate going to go on? Really, it’s beyond ridiculous. All of a sudden everyone is an Internet epidemiologist who never really cared about their fellow humans to begin with, much less understand basic, common sense, grade school science. The confirmation bias of hearsay just continues to spread the virus. I hate this situation with a passion, but I’m not going to let personal arrogance get in the way of doing the right thing...and I am extremely independent and arrogant in many ways.2 points
-
I hesitatingly vote a year or two and that’s being optimistic. Actually, I think the next couple of years on into perpetuity are going to be very rough.2 points
-
2 points
-
2 points
-
No. There's no reason to over react in that manner, especially over a decision that the SCOTUS got right ...1 point
-
There's no scenario where the electoral college fails to elect Biden Harris. The rest is moot ...1 point
-
Well, this one has been in the classified section here for quite a while and hasn't sold, although it does sit in the back of my mind.1 point
-
Sometimes, you just have to make the choice.1 point
-
Have you tried Tabor's? I've never tried to ship through them, so I don't know they can do it, but they're pretty friendly and responsive in there, and if they can't ship it perhaps they know who can. I'm interested to see the hoops you're trying to jump through. It makes it tough to sell primers or powder unless it's a local guy, and when you find a shipper, they're going to want $20 or so just to handle the shipping. Good luck!1 point
-
A couple of days turn around during CRB is excellent. Good to see someone’s customer service is doing what they should.1 point
-
I don’t think you will find many people, and probably none on this forum that don’t think you need to be properly trained. But my opinion is, that is one of those things in life you have the responsibility to gain on your own. Same thing with laws. If you don’t know the laws where you are carrying a gun, or you decide to jump in on the latest testing of BATF “rulings”; that’s on you. But the government shouldn’t require that training for you to have 2nd amendment rights. However, I have been arrested on weapons charges and I am absolutely sure I don’t have 2nd amendment rights. I have the privileges the state I’m standing in affords me. Not that I agree that’s right; its just the way it is. And this state doesn’t infringe on this much; so I don’t want other states or the Feds impacting our state laws. This forum is a very good source for education on gun laws in this state.1 point
-
It has been awhile but the usual jumping of hoops. Knowledge testing, I was certified because I worked at a chemical company. The shipping companies like Ups make sure you the shipper has properly identified, labeled, packed etc. So all they have to do is pick it up and ship it. You might ask the Gunshop how to be certified. Hope this helps.1 point
-
It’s absolutely imperative that we keep it, and we keep reciprocity agreements. You must abide by the laws of the state you are standing in. They don’t care what the laws are in your state, unless they have laws in their state that address it.1 point
-
You need someone hazmat certified to ship them legally. Check with the Gunshop in Crossville I think they might do it, probably charge you.1 point
-
1 point
-
No pain no gain is unfortunately true in this case. Go after it....it'll pay off.1 point
-
1 point
-
Thanks folks, yeah I was kind of leaning the same way. I can probably keep the box from getting any worse... and if I was to repair it, I can never really un-repair it right? And for some reason I agree fixing the bottom would be okay, but the logo'd part, leave it be. As is always the issue with stuff like this, shoot it? I don't have many guns I don't shoot, but I don't usually buy old guns that haven't been shot. I usually lean towards classics that are in A- condition so no guilt in enjoying it. I paid $1,400 for it so I mean it's not like if I shoot it I lose a thousand bucks or anything... I need to look it over a bit close tomorrow in some good light.1 point
-
1 point
-
Funny that the most expensive gun I've ever owned hasn't been my most reliable.1 point
-
I purchased a G45 and a 19x, I personally didn’t care for the 45 so I gave it to my son. It just didn’t work for me, for some reason the grip and sight alignment felt off. I do like my 19x though.1 point
This leaderboard is set to Chicago/GMT-05:00