Leaderboard
Popular Content
Showing content with the highest reputation on 03/09/2018 in all areas
-
Every politician, Repub and Democrat, is just looking for an excuse to take away our 2nd amendment rights.5 points
-
“Fool me once, shame on you; fool me twice, shame on me.” No one elected can be trusted.3 points
-
I’ve actually moved outside of Memphis up to the Dyersburg area, but I’ve heard good things about Shoot Point Blank and there’s always Classic Arms, though I’d recommend dealing with Greg there.3 points
-
I’ve not seen the documents in the Forrest case, but if they read the same as Barry’s, upon payment of restitution and *unsupervised* probabtion, he can pay the $450 administrative fee to have his record formally expunged. Both will have clean records in the eyes of the law. Ironic that Barry is getting a different treatment than she advocated for concerning other felons who’ve paid their debts.3 points
-
From Red October, "I'm a politician, when I'm kissing your baby, I'm stealing the candy out of its mouth." Unfortunately I believe you're correct.2 points
-
We have elections coming up in Aug. Careful where you click. Time to dig deeper into voting records than ever before. Can't afford to make a mistake.2 points
-
Delegate Nick Freitas is running for Virginia's U.S. Senate against Tim Kaine. Plainly speaking the truth.2 points
-
Hmmm...would ya just look at that.2 points
-
You can build a rifle better than anything you might buy for a lot less. My barrel, which is the most expensive part, was $200, the bolt is $100, upper was $75, hand guard was $50, gas block $50, charging handle $25 and gas tube was $15. That is a little over $500 for a HIGH quality upper. Couple that with a basic PSA lower and you will be into the gun for under $700 and have a gun that is as good as any $1,000 gun you might buy. When buying a complete gun you are getting what THEY want to sell and often times you spend another $200-$300 to change it to fit YOU. When building it you can build it how you want it and save money. I can guarantee you have all the tools needed to build an AR and if you need a tool I can send you what you need.2 points
-
I do not like 7 twist guns unless they are going to be shooting HEAVY bullets. 8 or 9 twist is my preferred twist. An 8 twist will shoot any weight bullet that will feed from a magazine. I would get a lightweight barrel as well. They shoot as well as standard or heavy weight barrels as long as they are decent barrels. 16"-18" is the barrel length I would use. You can buy 18" barrels that are lighter than most 1 6" barrels. That 2" extends the range as well as gives you the option of a longer gas system. If you decide on a 16" barrel go with a mid length gas system. With 18" barrel use a rifle length gas system. Use a CLAMP on adjustable gas block to tune the gun. No need to go longer or shorter. Those has system lengths minimize wear, felt recoil as well as gas in the face. If recoil and quick follow up shots are important use a muzzle brake. If shooting at night or low light are a possibility use a flash hider. Do not use a muzzle brake/flash hider combo Because they do not do either very well. Because most uppers are now 7 twist you might have to build your own or have it built. I would suggest a 12" m-lok free float hand guard. That will give you plenty of room for customization. For the lower just but a complete lower from a place like PSA. Triggers are easy to replace if your decide you want to upgrade, the rest should work well or is easily replaced. I am building my PERFECT AR for exactly the same reason you are. It is an 8 twist, 18" SS fluted, lightweight barrel from Green Mountain with a rifle length has system. It uses a CLAMP on adjustable has block that will let me tune it for a suppressor. It uses a 16.5" slim free float rail, ambi charging handle with a lightweight BCG from Brownells. It will use a 6" silencer instead of a flash hider. It has a forward assist and a dust cover. The lower will be an Anderson with a carbine buffer tube. I will do my own trigger at 3 pounds. It uses an ambi magazine release, extended bolt release and a Luth AR precision buttstock. Anni safety. Fingered pistol grip. It uses a flatware recoil spring with a buffer system I am building to reduce weight, reduce cycling speed and reduce felt recoil. Right now it looks like it will weight 6.5 pounds without an optic. I also have a 5 pound 20" AT that I built a few years ago. I have not decided on an optic yet but max magnification will be 6x. It will also use a micro red dot.2 points
-
Planned use? There are a lot of things to consider based on intended use.2 points
-
https://www.gunsamerica.com/blog/ride-sharing-company-lyft-offering-free-transpo-anti-gun-rallies/?utm_source=email&utm_medium=20180309_FridayDigest_164&utm_campaign=/blog/ride-sharing-company-lyft-offering-free-transpo-anti-gun-rallies/1 point
-
Happy birthday to me, 70 today, and for my present, knee surgery tomorrow. You just can't beat it, I am a blessed man. Threes score and 10. Who would have thought it!1 point
-
We have a Shoot Point Blank in Louisville, the daughter and I are there nearly every weekend, the staff gets huge kick out of watching other customers that don't know us. They all think it is cute to see a little girl with her father. Then she rocks her sparkly eyes and ears, loads mag, slams it home, works the action on her M&P22 and shoots smaller groups than the muscled tactibro in the next lane. We can't go to the range without positive comments from other customers.1 point
-
I am going to go ahead and coin the term “Ugly August” now before it all starts.1 point
-
Guys, I had a great birthday and the knee surgery is in the behind now. I had it on Monday morning at 8:30 and just now beginning to get around again. I won't go into detail, unless someone wants to know how surgery was, but will just say it was/is very very very painful. I am taking all the pain pills and can tell when they are spent and am in need of more. I have been to my first physical therapy session, on Thursday, and they warned me to be sure to take the meds 45 minutes before reporting for therapy. Therapy will be every other day (3days) during the week. I actually felt pretty good this afternoon. Getting better by the day.1 point
-
NRA files lawsuit. https://www.wthr.com/article/nra-files-lawsuit-over-florida-gun-control-law1 point
-
One of the most conservative governors of one of the most conservative states. This does not bode well for us. Many would say the answer is to vote, but he would have been my guy. The NRA backed him. I fear we aren't going to like the real answer to the question "What can we do?" before long.1 point
-
If you want a pre built gun and cheap. Looks like the Collierville Academy might still have DPMS Sporticals in stock for $479. I posted a rebate where you get 4 mags and a cleaning kit. https://www.academy.com/shop/pdp/dpms-sportical-rifle#repChildCatid=1562503 Most guys would go with the PSA for the money difference though. The upper and lower I posted only requires you popping 2 pins in my hand to "build". You can be shooting in 5 minutes if it takes you 4 to load the mag....1 point
-
I wonder who the next Governor of Florida will be...1 point
-
You expect anything done by the government to make sense? I agree why protect a building? Maybe I need to stay at a Holiday Inn Express and I would understand things a lot better. I stayed on one years ago, guess it's worn off by now. LOL1 point
-
PSA Upper http://palmettostatearmory.com/psa-18-rifle-length-223-wylde-1-7-stainless-steel-15-m-lok-upper-with-nickel-boron-bcg-ch-516446834.html Lower http://palmettostatearmory.com/psa-ar15-complete-classic-lower-5165447829.html Click them together. Roughly $545 shipped. Then just pay bgc and transfer. Psa has other options. I just grabbed these as in stock examples.1 point
-
I just left Guns and Ammo on Summer and they still have a huge selection on the shelf. I'd suggest taking a look at the ones they have to see if one style strikes your fancy. If you decide to build, I have a pretty detailed step by step instruction sheet. Mine has the post and it doesn't interfere with the scope.1 point
-
both of my SBR's are Anderson lowers. I've fortunately cured my AR building addiction but it was costly and lasted a couple years1 point
-
I bought my first AR in 1986 or 1987; can't recall for sure now. They cost more then than they do now. It is highly likely that ARs will never be any cheaper than they are today. It's an unprecedented buyer's market. Look at prices from Palmetto State Armory; they run remarkable specials all the time.1 point
-
1 point
-
I'll pass this along to my friends who use ride-sharing, and encourage them to choose Uber.1 point
-
Thanks guys, that puts my mind at ease about them. Im hoping to make it to my LGS today to pick up one or two of them and finally start building.1 point
-
1 point
-
I have PSA, Anderson and now ARFiveSeven (ARFifteen) lowers on my build. I have not honestly found a difference on them. If I were going for a high end matched billet upper and lower set, maybe. I have built a half dozen ARs, all with PSA uppers of various flavors. It is addictive. IMO the upper (and quality of parts therein) is more important than the lower. I have several PSA uppers as mentioned, and there is a marked difference in their premium line and their lower line. I am going to assemble my next AR complete, upper and lower. Ronald_55 posted a site https://22mods4all.com/ that seems to scratch that itch at a really reasonable price. For what it is worth, I have a higher end PSA I built, with several custom parts beyond the 'catalog' choices. It is my GO TO carbine.1 point
-
1 point
-
Welcome aboard from Cookeville! Post some photos of your favorites sometime, we like pics!!! Sent from my iPhone using Tapatalk1 point
-
You’ll never regret buying two, but beware... they have a tendency to grow into rifles, lol. I have built several Andersons. I never had a problem until recently I got a stripped upper out of spec. It looked like it wasn’t finished and wouldn’t even fit into a lower. I think that was a fluke, and I wouldn’t hesitate to get another. Their lowers have always been good for me. If the price is right, then go for it. If you want a smoother, blacker finish then Spikes or Aero Precision, IMO, but you’ll get a good build from an Anderson. I especially like the Anderson lower parts kit. With some polishing, low power springs and a long adjustable grip screw, I can get a really good crisp trigger.1 point
-
Well everyone seems to have their own opinion on what the police officers should have done or not done during the shooting and I look back all the way to Columbine High School and I can say this with a clear mind. If I was a LEO and I arrived at the school and shooting was still going on I am going in. I'm wearing a modest amount of protective gear on my body and I do have the element of surprise on the shooter/shooters and if I save 1 or 100 lives I have done my job to the best of my ability. To stand outside and listen to the gun fire inside would just be unacceptable to me. I'm 70 years old and I would still go in...............JMHO1 point
-
We have several in stock and have a SP-01 Tactical available for rent. Please me me know if you are looking for a particular one.1 point
-
I've always subscribed to the Marine Corp's definition of courage: Courage is not the absence of fear, it's not allowing that fear to control you so that you can do what is needed to be done. I've been lucky to have met quite a few courageous people in my lifetime, and not one of them said that they weren't afraid.1 point
-
"Courage is being scared to death and saddling up anyway" John Wayne. While I know is it a quote from an actor/movie it has always made sense to me. Growing up in a military family, surrounded by Troopers that have been in the line of fire and listening to my Dad recall (when he would) times of sheer terror....I am convinced that courage/fortitude/gallantry/heroism is both a mind set and a choice. One must choose to rush into automatic weapons fire to pull a buddy to safety knowing what a bullet could do to your own body. One must choose to go into a building when other lives are at stake. Yes many choose to run but others choose not to. Military, EMS, Fire and Police have chosen those professions for various reasons and suffer the benefits of those choices. The lowering of standards has contributed to the inclusion of those best suited to drive a desk or other support roles, supplanting the ones naturally gifted/trained/driven to do the job that needs done. Quotas, political correctness, and liberalism have diluted the idea of courage and bravery in segments of our society. I miss my country....... Rough men stand ready.....1 point
-
How to Sell Your Guns When the Market is Slow September 24, 2017 This is an article that I have been tempted to write on several occasions now, but each time I questioned whether the timing was right or if the message would be welcomed and so I postponed. Recently, however, there have been quite a few threads and individual comments made about the difficulties of selling firearms during a "slow market" so I think the time is right. But First, Some History... I do not want to dwell too much on this particular point, but I do believe that it is salient to pause for a moment and observe the current political climate as it has directly influenced the state of firearms sales across the nation. Up until the last US Presidential Election in November of 2016, the firearms industry was booming because people were afraid of both who was then currently, and who might have been next, occupants of the White House. Fear of scarcity or outright prohibition of a thing absolutely drives up demand for that thing, and subsequently the cost of that thing. During the Obama Administration, we lived under the constant specter of another weapons ban and we saw supplies of certain firearms and ammunition all but dry up. What was left to be found almost always had a high price tag assigned to it. When Donald J. Trump was elected, gun owners and prospective gun owners all sighed an enormous collective sigh of relief and practically overnight the firearms industry was dumped on its head. The fear was gone. The incentive to buy was gone. Warehouses of ammunition and firearms that had been rushed to production ahead of what could have been a Hillary Clinton White House were suddenly quiet and stagnant. And so, the firearms industry did what any industry does in cases like this: It suffered. It cut costs. I dumped products at prices that were unheard of a month before. The fire sale began, and it persists to this day. Why Should You Care About Any of That? The reasons any of that is important to you are these: That tactical rifle you bought a few years ago and paid nearly $2,000 for is probably being sold new today for less than half that price. That handgun you bought last year is probably anywhere from $50-75 cheaper this year, brand new, and probably comes with twice as many extra magazines straight from the manufacturer. Today, retailers are competing against you in your role as the Seller for the same sales you are trying to make. They are able to offer brand new merchandise today for prices that would have been reasonable for you to ask for a gently used item this time last year. To snare a buyer on the secondary market in this economy, you have to distinguish yourself and what you are selling in some way that makes it more appealing to the person debating between your gun and that brand new one in the store. So, How Do You Sell in a Slow Market? I have been paying very close attention to this for the past few months and these are my observations. They are not the gospel, but they seem to be holding up under their own merit so far. As with anything, there may be exceptions to any or all of these, and if that works in your favor then I am going to be very thrilled for you. Do your research. Check the retail pricing and availability of whatever you are trying to sell. Mark your price accordingly. Understand that if you are priced too close to retail for a new item, most folks will go buy the new item instead. Also, check and see if a new version or model of whatever you are selling has just been or soon will be released. Prices on old versions almost always go down when a new version is out or is imminent. Eat The Extras. Those expensive night sights that you put on your handgun? Consider eating the cost of those. Point that out as an incentive to buy your handgun rather than the one in the store that doesn't have them. The same goes for tossing in a few extra magazines if you have them, or other small accessories. Obviously, there is a limit to how much you should be willing to eat of the cost of an item, but even then be willing to discount whatever you are adding to the "package price" so that it is compelling to a shopper. Break Up The Package. If you don't want to eat the cost of too many extras, or if the price of your package offering seems to be turning shoppers away, consider breaking apart the package and offering the core item at a cheaper price and then liquidate the accessories separately. This is expecially helpful if you have non-regulated accessories that could be sold on social media sites (Facebook, Twitter, etc) that do not allow gun sales but do not prohibit accessories. Bigger audiences can mean quicker sales on those types of things. Understand The Impact of Modifications. This is going to hurt some feelings, but it has to be said. Modified guns are harder to sell. Think twice before you take a soldering iron (or pay someone else) to your Glock's frame to stipple it. The same goes for custom paint jobs or hydro-dipped graphics. Beauty is often in the eye of the beholder (YOU) in those things, and other people may not care for them at all. Don't be surprised if your stippled Glock with skulls and crossbones hydro dipped graphics doesn't sell quickly, or at all. Take Good Pictures. The addage that a picture is worth a thousand words is no more true than in advertising. People tend to want to see what they are buying. Take pictures of it and post them here or link to them elsewhere in your post. Ads without photos tend to be overlooked. Invest Some Time. If you post an advertisement, come back to it once a week and bump it back to the top of the "new items" search by replying to the thread. Reduce the price a little after a week or two, if you can. Be willing to engage with prospective buyers and answer questions. Entertain counter offers if you can. It takes a little time but it keeps your advertisement in front of eyeballs and that's what matters. Pull It Today and Sell It Later. Real estate brokers know that if a house has been on the market for too long, it goes "cold" and people stop looking at it. The buyers can see how long a house has been listed and assume something must be wrong with it if more than a reasonable amount of time has passed. Take a cue from that and de-list your items after a while if they don't sell. Come back later and list them again. I hope this helps you all in some way. The current environment is a buyer's market and biased against the seller, both at the retail level and on the used market. Gun stores are going out of business and folding up left and right. So are manufacturers. The ones who are surviving are relying on things other than gun sales to keep money and buyers coming through the doors. Now is the right time to buy firearms and ammo cheap and stack them deep. The political climate is guaranteed to shift again and when it does we will all find it hard to believe that we had it this good (as buyers) in days past. Above all, be patient. If you can afford not to sell a firearm right now, you might want to sit on it for another three years and see what happens with the next Presidential election. Trump has been GREAT for gun owners, but terrible for gun sellers. We might not be so lucky in the years ahead.1 point
-
I hate to tell you but FLA is not some big bastion of conservatives and pro-gun values. Hell, it’s not even the South except for them rednecks up in the panhandle.0 points
-
You expect anything done by the government to make sense? I agree why protect a building? Maybe I need to stay at a Holiday Inn Express and I would understand things a lot better.0 points
-
0 points
This leaderboard is set to Chicago/GMT-06:00