Leaderboard

I pulled 9 kids from 3 to 13 behind a boat all weekend long. Once the rain cleared out mid Saturday morning, they were in the water despite an air temperature in the low 60s. My favorite may have been a six year old - who despite showing me that she knew all of the hand signals - only ever gave me "go faster" sign once in the water. I didn't get in the water a single time, but the joy a kid finds the first time they get up on a board is priceless.

Having that hard of a time against North Avenue Trade School doesn't bode well...

If I were you I'd tell them to leave NOW while plenty of fuel is available and before the highways get crowded. Emm....well maybe I should say if I was them I'd leave NOW while plenty of fuel is available and before the highways get crowded. There...that's much less bossy...haha.

TMI

Let me guess - you took all of your guns out for a romantic day on the lake in a rowboat. Just when you were passing under some trees on the edge of the lake a water moccasin dropped out of a tree and into the boat. Your natural reaction was to grab the 12 gauge loaded with 00 buckshot that was sitting cozily by your side and...well, lets just say that 00 buckshot can blast right through a snake and still put a heck of a hole in the bottom of a rowboat. You tried to save them. Tried desperately to pull at least a few of them from the murky depths but, in the end, you woke up on the bank desperately clutching a spent 12 gauge shell and suffering terribly from all the rowboat-wood splinters in your backside. You don't even remember pulling yourself out of that watery grave and even the pain in your backside couldn't match the aching in your heart. Now, even though it is many years later, you still feel such a sense of loss that you can't even so much as look at a gun without breaking down. Even the slightest hint of the smell of gunpowder makes you burst into tears. Or something.

I having been buying one ladder stand every year and adding it to a piece of property I hunt. As of this coming weekend I will have have 5 ladder stands and a ground blind. That pretty much covers the property. It is defiantly more expensive doing it this way. The nice thing is now, depending on weather, I can sneak into where ever I need to hunt without much noise.

The barrel alignment is concerning but it's something I think you just have to do. What I did is take a straight edge and line it up on the front trunnion and then on the handguard retainer to make sure that it's relatively square. There's some play in the retainer so it only gets you so far but whatever.

I have never been a fan of hang ons and climbing sticks. It might have something to do with my big gut and wide ass. I prefer ladder stands. A little easier for me to get in and out of and have more room when sitting.

Looks like I'll be cooking dove breasts tomorrow afternoon, as we had a really good shoot today.

Information on this match is available here: http://bggrgc.com/html/BG_GRGC_2017_Night_Match.html

https://www.usatoday.com/story/weather/2017/09/05/hurricane-irma-so-strong-its-registering-devices-designed-detect-earthquakes/634419001/

Picked up one on their LEO/Military program. Fired a few hundred rounds thru it today, worked perfectly. Trigger takes a little bit o get use to. I think it was a good deal for less than $300.

Started on an AK last night with my neighbor. Got almost everything finished except for some pinning. Now time to finish up my couple that have been sitting around... Looks like my photo didn't upload. Picture tonight.

My job has me in some pretty unsavory things. Things that outside of work and gloves, you just don't want to handle your tools if you don't have to. For many years I have carried a Kershaw Tanto Blur semi-serrated knife. It is a great knife, that I got at a great price second hand. I have filed the tip down to create a prying tool, which I use daily. For some, the idea might be cringeworthy, but as I use it daily, it made sense to me in my work environment. Using it daily, it is now considered a 'dirty' knife. Meaning it is not safe for common household chores. This leads to not having a 'clean' knife for EDC when not at work. I have a Benchmade Type 44 that I have carried for a couple of decades (up until it was retired for the Blur,) however, given that the knife is literally irreplaceable, I needed a new knife. I set out today to buy one, and I had been considering just grabbing another Kershaw Blur. To the point of adding it to my cart on Amazon at least three times before changing my mind. I was at Cabelas perusing the Benchmade offerings when for a rare occasion, someone offered some help at the knife counter. I asked to see a Mini-Barrage in the satin finish. It was over. The form factor is close enough, assisted opening from a thumbstud. Closing is obviously different, and it is only able to be carried tip up. So I changed the orientation on my Blur to keep commonality, but I will have to reteach myself to draw from tip up. Overall, it snaps open with serious authority, it razor sharp, and being a Benchmade, I know it is a solid knife. Here are the two of them together along with my EDC 'clean' flashlight.

It is a 5.11 Tactical light I picked up at Academy for $20. I needed a small form factor light to fit in my pocket. It feeds off of two AAA batteries. I have a pair of Ozark Trail lights from Wal-Mart, and honestly, I swear by them. However I don't always remember to grab one of those from the truck, and my phone is not the handiest of lights. The light is similar sized to my knives and fits flat in a pocket. The Ozark Trial lights, which I CAN NOT SAY ENOUGH GOOD ABOUT are priced at ~$20 a pop and are not suitable for pocket carry, but at four and six AA batteries, with a 350 and 600 lumens output respectively, I love them. They are aluminum and have taken a serious beating. Dropped down flights of stairs, hit by machines, etc, and they still work like a clock. http://www.511tactical.com/tpt-edc-flashlight.html https://www.walmart.com/ip/Ozark-Trail-Flashlight-350-Lumens/49840409 https://www.walmart.com/ip/Ozark-Trail-Flashlight-600-Lumens/51053343

There is one road out of the Keys - US-1. Dropsonde measurements from earlier today are being verified, but a reading of 226MPH was recorded. I learned one thing on a search and rescue crew back in the day. If you wait until you know you need to leave, you're way too late.

My Mom and step dad were supposed to move to Florida today. They decided to wait a few days.

After seeing Harvey just last week, you would think it's a no-brainer.

I run the ARA match in Middle TN. I don't believe Memphis is still doing their match. You are certainly correct in that most of us bring two guns to a match and would be glad to let a new shooter try them out. One thing to note is that you are looking at $15-$18 per box of ammo used and they will most likely want you to use their ammo. No CCI in these guns. A 5 card match will take at minimum 5 boxes. I just want to set some expectations about the cost. It isn't a cheap endeavor. On the note about junior shooters, Madison Reed whom is 14 just finished 7th overall at ARA Outdoor Nationals out of 100 competitors last weekend. There are some good young shooters out there.

I hope he is listening to you!!!!

Trying to convince my bro and his family to head up here before it hits.

I would imagine that an Appleseed event might not be a bad idea on several fronts. First of all, simply for the training. Second it seems like a good place to network with the instructors who are likely local and can help him find the local competitions/events/teams that would fit the bill for what he needs.

I just checked the MSSA Schedule for what they have. If he's in school he won't be able to get out there for the .22 Benchrest, (Wednesdays at 2:00) They do have a .22 Silhouette shoot on 9/17 at 9:00 (Sunday) He might be able to get some information from someone before they start shooting. I think I found something: Won't hurt to give them a call. Club Name: Chickasaw Council Marksmanship Team Club Mailing Address: 1106 Wilmore Road Memphis, TN 38117 Range Address: Memphis, TN Email: Bsamarksmanship@aol.com Club Type: Boy Scouts Counsel Troop or Crew Phone: 9016852327 Membership: OPEN

Just got a quick change 12.5" barrel, front site, barrel handle for my Fight Light Upper 2017-09-05_04-32-49 by Johnny Rotten, on Flickr

He could see if there are any ARA or ABRA matches in the area, or if he can travel some to these matches. The "youth" shooters shoot for free ar ORSA ARA/ABRA matches, and some of the regular shooters might just "loan" him a rifle as the regulars usually bring more than one rifle. He needs to attend one or more matches as a spectator, and ask questions, talk to the shooters and match director. Getting young shooters involved in the sport is a good thing, and long timers usually recognize this and will help someone who is interested.

The takeaway on "Category 6" is probably more relevant to south Florida than it is in the Caribbean islands it's about to hit first. For south Florida - the impact of a storm of this size would be devastating in both damage from the wind and the storm surge and flooding that is sure to follow. But, that's in the US, with modern building codes - and those in south Florida have been strengthened over the years to try to lessen wind damage from storms like this. In places like Cuba, Haiti and most of the leeward islands it would all but wipe them off the map.

His best bet is a CMP or NRA Smallbore Compeition. Most likely a 3P match. I would call the University and ask if they know of local matches. That is probably the best bet. MSSA used to shoot Rimfire Benchrest, but I don't see any matches this year. As mentioned above, not sure of the financial situation, but none of these are cheap to do and require some travel most of the time.

Have him try here. http://memphis-ssa.net/. It's pricey but I don't know if that's a problem or not.

I should add there's also an alignment tool from Requiem Arms that I'm thinking I'll pick up for grins future use.

Heard something in TV a bit ago that Irma may turn into a cat 6 hurricane. Was a bit surprised coming from a meteorologist, since he should've known that there's no such thing as category 6 for hurricanes

GT looked good, even if Roscoe P. Coltrane is their coach. In real football news, Vanderbilt looked solid in season opener against MTSU.

As a native Georgian and an engineer, I pull for Tech when I can. My wife is Bulldog born and bred, though. So, I have to be careful if I want to sleep inside.

I don't disagree (and that's funny!) but I think GT is perennially under rated. They're known to show up occasionally and give good teams fits.

I have a permanent stand, now that I have my little honey hole it's all I need. But I still have a few other methods to hunt if I happen to hunt elsewhere. I have a small lock-on with some screw-in steps that I really like, I used it for years until I broke an ankle and didn't feel comfortable using it anymore. Then I got a climber, a bit on the heavy side but not unmanageable. I was never not able to find a tree to use it on, and if I fell asleep I would not fall out of it, unlike my lock-on. While they do make a little noise, I never failed to harvest deer with them. I also have a ladder stand, but haven't used it yet, I got it to bow hunt out of but my shoulder has not allowed me to get the practice I need to have before the hunt.

I think I got everything updated correctly now on the OP... Reciprocity Recognition of Out-of-State Handgun Carry Permits Tennessee now recognizes a facially valid handgun permit, firearms permit, weapons permit, or a license issued by another state according to its terms, and will, therefore, authorize the holder of such out-of-state permit or license to carry a handgun only in the state of Tennessee. The person must be in possession of the permit or license at all times such person carries a handgun in Tennessee. Tennessee will enter into written reciprocity agreements with other states that require the execution of such agreements. If a person with a handgun permit from another state decides to become a resident of Tennessee, such person must obtain a Tennessee handgun permit within six (6) months of establishing residency in Tennessee. All applicants, regardless of permits issued by another state, will be processed as originals. The applicant must be twenty-one (21) or is at least eighteen (18) years of age, and is an honorably discharged or retired veteran of the United States Armed Forces or is a member of the United States Armed Forces on active duty status and includes with the application a certified copy of the applicant’s certificate of release or discharge from active duty (DD214) or includes with the application a military identification card as proof that the applicant is on active duty member of the military, take a DOS approved handgun safety course, complete the Tennessee Handgun Carry Permit application, provide proof of U.S. Citizenship or Lawful Permanent Residency, pay the fee, and be fingerprinted. Licensing requirements are not included in the reciprocity agreements between states. The mutual recognition of handgun possession privileges between states has not changed and is listed on this website. A facially valid handgun permit, firearms permit, weapons permit or license issued by another state shall be valid in this state according to its terms and shall be treated as if it is a handgun permit issued by this state; provided, however, the provisions of this subsection (r) shall not be construed to authorize the holder of any out-of-state permit or license to carry, in this state, any firearm or weapon other than a handgun. States Recognizing TN Permits Alabama Alaska* Arizona* Arkansas* Colorado - Does not honor 18-20 year old permits or non-resident permits Delaware Florida* - Does not honor 18-20 year old permits or non-resident permits Georgia* Idaho Indiana Iowa Kansas Kentucky* Louisiana* Maine Michigan* Mississippi* Missouri Montana Nebraska - Does not honor 18-20 year old permits Nevada New Hampshire* New Mexico* North Carolina* North Dakota - Does not honor 18-20 year old permits Oklahoma Ohio* Pennsylvania* South Carolina* South Dakota* Texas* Utah Virginia West Virginia* - Does not honor 18-20 year old permits or non-resident permits Wisconsin - Does not honor 18-20 year old permits Wyoming* * Indicates the state has a formal reciprocity agreement with Tennessee (NOTE: Persons with a valid Tennessee Handgun Carry permit should contact any state for information on carrying such handgun prior to entering the state.) States Not Recognizing TN Permits California Connecticut Hawaii Illinois Maryland Massachusetts Minnesota New Jersey New York Oregon Rhode Island Vermont Washington https://www.tn.gov/safety/article/hgreciprocity

I've debated the same thing for a while. That's why I did so much reading on them. I have a Summit Viper SD and feel really safe in it as well as love the comfortable seat. But there are some trees that a lock on and sticks would be easier to get into, and have limbs covering me as well. I definitely wasn't interested in a small platform or skinny seat to save weight. I wanted a secure and comfortable stand. I'm 6' 225lbs so some stands for a guy that weighs 160 won't be comfortable for me even if it's light weight for transportation. I'm excited to try it and think the part I'll like the least is stepping from sticks to platform and vice versa.

There are advantages to hang on's with sticks. You can hang them in some nasty (and crooked) trees offering great concealment. They are also easy for one person to carry to a tree, if you are on a lease or some public land where you are not allowed permanent stands. Also the sky is the limit with these stands as well, as long as you have enough sticks. They have their limitations as well, such as comfort, and they are harder to get in and out of for sure.

Awesome! I still have my Polish underfolder to build. i am pretty much ready to get started on it. I may get started tomorrow actually. I have access to a 20 ton press and have the Toth tool to squeeze most of the rivets. I just got the headspace gauges last week. I've also been trying to get the proper finish on the receiver... I want it to match the original finish of the other parts. My biggest concern is lining up the barrel, drilling for the pin and populating the barrel and actually get it all ALIGNED I'll be learning something from this thread!

Black water lives! Sent from my iPad using Tapatalk

I never thought I'd be writing in after all these years, but I have a new relationship. Today we did it 150 times and only had 2 issues. It's ok, it was in the first 25 times and we were just warming up. I was smiling and I think my partner was, at least, willing and able. Strange wobble when we did it, but it's the law of physics. Even though we just met, my partner does need some cosmetic surgery. It is not for self esteem, we don't care what other think about us when they see us. It will make it better when we do it.

^That one still needs some work so I can't do pictures now but I have my personal Romanian to do, an RPK, and some form of a mutt build so there will be plenty of pictures of the build process. So far as tools a press is a given, I have the Harbor Freight 12 ton. Great? Not really but it works. It's slightly wobbly and that makes me really nervous because I've seen lots of things come flying out of presses, and a guy catch part of a press plate with his face. Best solution is shims or just square it all up and weld some things to take the slop out. Anyway that was just an aside. Outside of that I'd really, really recommend the AK Builder tools. Riveting jig, trigger rivet jig, and barrel press kit. Robert Forbus also makes really nice AK build tools like populating tools and barrel press out jig, recommended for when you do the head space. Also headspace gauges, those are critical.

I think the first time I saw an ad like this it was a pretty nifty sell. However at least three to four times a year (ten times more if you count the poorly written ones) a similar ad pops up as if the seller were somehow original. To me anymore (and I have bought and sold hundreds of times on CL) it is turn off anymore when I find an ad like this.

Whoa....I love me some grilled salmon for sure! I also love it cooked real slow in real butter in a carbon steel skillet covered with fresh chopped dill! Very good indeed! I usually do a baked sweet 'tater with mine.

Bless us, Oh Lord, and these thy gifts which we are about to receive from thy bounty, through Christ, Our Lord. Amen. Deer Supper

I think Yankee Marshall said it all right here LOL and I agree .........

This is amazing. Basically, post 9/11, someone leading a small unarmed guard contingent on Norfolk managed to grow their security program, COMPLETELY on their own and without any directive to or oversight for, to an unauthorized police force with 92 vehicles, an effing speed boat, and a full armory with all the kit you could imagine. It looks like no one in the Navy ever really questioned whether or not they had the authority to do what they were doing, and it turns out that nope. They didn't. This is intense. Hahaha. Like, i can completely see how this happened, down to the DLA just handing over massive amounts of unused vehicles to them because they had an address on Norfolk. This is not the first story like this that I have seen. I feel like I missed out on some massive opportunities.

Yep, the original one (or at least the first one I saw) was this one for a POS Camry. It's still the best one because he went all out with the visuals, not just the text. https://www.someecards.com/news/automotive/the-most-creative-used-car-ad-ever-on-craigslist/

HAHAHA........that's an awesome pic Doug!! Happy dog for sure!