My CZ 75b conversion to SAO using CGW Race hammer kit and CZCustom Flat trigger

[plinker4life]

Just finished installing the Goodies into my CZ 75b. All I can say is WOW! Thanks CGW for the great parts and service! Here is a short video I shot this morning on my Iphone. Sights and Grips are next.

 

https://www.youtube.com/watch?v=nTinfkvoYJo

 

For those DIY people out there here is the parts list I used and total cost. I started the CZ conversion Sunday night at 8:00pm just finished up at 12:50 am Monday. It was not a very hard job ,took my time logged some pic's on my phone in case I forgot how some things were oriented. Also polished some internals with the dremel. Total time to do another would be around 1.5 hours with the polishing and that would be taking my time and not rushing anything. I put everything in my CZ but left the FPB "firing pin block" in on the first trial. By leaving the FPB in you have a much safer gun but there was still a pretty good bit of pretravel and the reset was as long as the pretravel. Being that this gun will only be used to punch paper I removed the FBP and ground off the FPB lifter. That made a HUGE difference in the reset and it got rid of 99% of the pretravel . If I planned on carrying this gun I WOULD NOT REMOVE THE FPB. With all this said here is a parts list. I also purchased the starter punch CGW recommended. It worked perfect. $7.00



Parts form CGW "Cajun Gun Works"



1-Race hammer Kit "comes with adjustable sear" 123.00



1-Trigger pin free floating 13.00



2- Hammer and strut pins 2.50 each 5.00



1- Sear spacer "only used if FPB is removed" 1.50



Shipping 6.00



Total 148.50



Parts from CZ Custom " They were out of stock on the flat trigger at the time, but I found one on ebay for myself"



1- CZ 75SA & Tactical Sports (Single Action Only) Trigger Black AL 40.00



Shipping 11.61



Total 51.61



GRAND TOTAL= $200.11

[graycrait]

That is something I need to do someday.  Wish I had back one of those 3 75s I used to have or even the 85 Combat.  hmmmmm.....